The types of dance flooring are mainly divided into two: 1) transient anti-slip and 2) permanent anti-slip
1 (Transient anti-slip classification -
What is transient anti-slip, is the floor rubber and dance shoes will produce friction when dancing this time to use more often will be grinding very light and bright or water will finally slip and fall (can not let the dancers to play the most common and simple slide, and even more can not let the dancers in place in the circle and difficult movements) (Can not play the most common and simple slide, not to mention the dancers in place to spin and difficult movements).
Transient anti-slip classification: layered foam class also known as concentric homogeneous, layered elastic class concentric homogeneous, layered solid bottom through the body through the same penetration of the solid bottom also known as concentric homogeneous
2, permanent anti-slip classification -
What is the permanent anti-slip, no matter what the floor rubber and dance shoes in the dance friction or water beads are permanent anti-slip. Or water beads are permanent anti-slip, permanent use
1) permanent anti-slip:
Homogeneous translucent (up and down one color without layering - not layered) production production into a similar rubber flooring, 100% prohibit the use of the fourth generation of dance flooring alternative materials to replace the recycled material, homogeneous and translucent permanent anti-slip matte surface without uv treatment, light but not slippery, soft but not hard, hard but not soft, with flexibility, use to the end of the life of the dance floor. Have flexibility, use to scrap are non-slip, in the final analysis is a soft homogeneous translucent extruded products, permanent use, permanent non-slip, with a certain cushioning effect, not astringent, not slippery, good flexibility characteristics. Permanent use, permanent non-slip, can be arbitrarily adjusted width, length, thickness, color, square unrestricted, short production time.
A, what is the dancer floor rubber
1) dancer floor rubber called dancer floor is a pvc polyvinyl chloride dancer special soft chemical raw materials, according to the characteristics of the dancing professionally formulated.
Dancer floor rubber is a soft homogeneous translucent permanent non-slip (up and down one color without layering - not layered) production production into a similar rubber flooring, using 100% new material pvc polyvinyl chloride raw materials (referred to as PVC), 100% prohibit the use of the fourth generation of dance floor alternative materials to replace the recycled material oil, homogeneous translucent permanent non-slip surface matte without uv treatment, light but not slippery, soft but not hard, hard but not slippery, and not slippery. Soft but not hard, hard but not soft, with flexibility, with to scrap are non-slip, in the final analysis is a soft homogeneous transcentric extruded products, permanent use, permanent non-slip, with a certain cushioning effect, not astringent, non-slip, good flexibility characteristics.
2) homogeneous translucent permanent anti-slip (up and down one color without delamination - not delamination) production production into a similar rubber flooring, using 100% new material pvc PVC raw materials (referred to as plastic) homogeneous translucent surface matte no uv processing, light and not slippery, soft and not hard, hard and not soft, with flexibility, with the end of the scrap are anti-slip, permanent use, permanent anti-slip, can be adjusted at will width, length, thickness, flexibility, and good characteristics. Flexibility, with to scrap are non-slip, permanent use, permanent non-slip, can be arbitrarily adjusted width, length, thickness, color, square is not limited, production time: normal 2 days
Professional dancers flooring is a homogeneous translucent permanent non-slip (up and down a color without layering - non-layering) production production into a similar rubber flooring, and the general PVC, most of which is used for industrial insulation, material Harder and rougher. Another is the foam sports floor rubber, foam is not pressure, friction, suitable for sports competitions, etc.; and, sports flooring foam bottom layer, can not do the dance movement two most conventional movements: skating and in situ rotation. And dance floor rubber has a qualitative difference.
The color of the Dance Floor brand is multi-color and can be made according to the color card provided by the customer. The size can also be customized production according to the length and width of the customer's size, without any consumable quality.
Nowadays, kindergartens, elementary schools, middle schools, high schools, colleges, teenage camps, dance art schools, etc. generally have their own dance classroom stage venue, and all of them are dancer flooring
Dance classroom or stage paved with what color
Dancer flooring must be to ensure that the dancers in the dance does not feel too slippery or sticky, and a certain degree of comfort for the feet.
The teaching nature of the dance group the main choice of colors are: dark green, greenish gray, light gray, towel blue.
Stage and museums with dancers floor rubber is mostly selected dark gray, black, silver gray, flag red, wood grain, custom colors.
Children most of the dancer floor rubber with sky blue, towel blue, pink, custom colors.
Adults with dancer's floor rubber mostly chosen in gray, light gray, silver gray, sea gray.
Multiple dance or stage dancer flooring is available in dark wood grain, light wood grain, blue wood grain, dark wood grain.
The runway show or booth is mostly used in white, black, flag red.
Thickness of dance floor rubber for dancers
The specification of dance floor rubber is divided according to its thickness, which is mainly divided into: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
Thickness of dancer's floor rubber is chosen according to the situation of the basic ground and whether it is professional or not, the thickness of more than 4mm is suitable for Wooden ground, 5mm or more thickness is suitable for cement ground, floor tiles, etc.
Often professional dance colleges, performing groups, etc. are using 5mm or more thickness of dancer's floor rubber.
Dancer's professional floor rubber characteristics
1 stability Dancer's special dance floor rubber is a soft pvc floor board, there is a certain degree of self-weight, to ensure that the product in the process of movement of the stability and firm, and played a role in the automatic reinforcement.
2. Firmness Dancer special dance floor rubber is a soft PVC, it is based on the characteristics of the dance, professionally formulated and has a certain cushioning effect, not astringent, non-slippery, flexible and good characteristics. And dancers professional dancers special dance room floor rubber width should be in 1-2m, which can ensure the integrity of the pavement, not only from the visual presentation of the perfect show, in the solid performance is also guaranteed.
3. Comfort The surface of the dance classroom floor rubber for dancers by special treatment, and the brightness of the light coincides with the light will not absorb and reflect glare, can better protect the dancers in the process of the movement of the eyes is not easy to produce a sense of fatigue.
4. Durability and abrasion resistance Dance studio floor rubber for dancers using 100% pure soft PVC high-quality materials, the surface by a special high-environmental high-tech materials TPU technology, and has the best durability and abrasion resistance, thus increasing the service life of the floor.
5. Diversified installation methods Dancers special ballet floor rubber installation methods **** there are two kinds: (1) movable (2) fully fixed. We install according to the customer's requirements for the use of dance venues.
6. Maintenance is easy Dancer professional dance floor rubber surface to the outside world has the ability to exclude pollution, such as surface contamination, with a clean mop, water scrubbing can be.
7. Good sound-absorbing performance The standard thickness of the bottom layer of Dancer's professional dance flooring, coupled with suitable anti-elasticity and reasonable shock-absorption, has the function of sound-absorbing in the movement, sound insulation effect. Dancer dance rehearsal hall floor rubber color bright, smooth and delicate surface, good flexibility. Moderate elasticity, moist and astringent moderate, conducive to buffer the impact of the movement, and easy to clean and maintain, invariant, non-cracking. Dance floor rubber performance is excellent, moisture-proof, non-slip, wear-resistant, pressure-resistant, stain-resistant green, non-methanol, non-toxic, can be very good to protect the dancers movement will not fall and cause accidental injury.
8. Dancers special floor rubber can make the dancers do not slip and do not fall to show off the wonderful art of dance!
Shanghai North Dance Flooring, Hume Dance Flooring, Ballet Dance Flooring, Top Dancer Flooring, Dance Flooring, Shanghai North Dance Map - Hume Brand, Dancer Brand, Ballet Brand, Top Dancer Brand, Dance Brand, Dance Brand, Shanghai North Dance Map, Hume Brand Flooring, Dancer Brand Flooring, Ballet Brand Flooring, Top Dancer Brand Flooring, Dance Brand Flooring, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address, Shanghai North Dance Address brand flooring, Shanghai North Dance address, Shanghai Humei, Shanghai dancers, Shanghai ballet, Shanghai top dancers, Shanghai Dance Queen, Shanghai North Dance flooring, Shanghai Humei flooring, Shanghai dancers flooring, Shanghai ballet flooring, Shanghai top dancers, Shanghai Dance Queen flooring, Shanghai North Dance location, Shanghai North Dance flooring Co. Shanghai North Dance Shanghai North Dance flooring Shanghai North Dance status , North Dance address, North Dance map. North Dance geographic location, top dancers, dancers, professional dancers, dancers floor, floor dancers, dancers flooring, North Dance, North Dance geographic location, North Dance location, Shanghai North Dance flooring, North Dance flooring, North Dance flooring, Shanghai North Dance flooring, Hume flooring, dancers flooring, ballet flooring, top dancers flooring, after dance flooring.
9) Dancing system
(Dance room, dance studio, dance classroom, ballroom, stage, theater, runway, performance, rehearsal hall, rehearsal, form room, piano room, street dance, concert, product launch, studio, tour, opera and dance theater, gala dinner, theater aisle, theater showroom, exhibitions, rendezvous, fashion show, museums, exhibition halls, museum of mass art, (Culture Museum, Cultural Palace, Children's Palace, clubs, stage setup, training, temporary rehearsal, temporary stage, projection room, theater and opera works in the performance and art display special floor rubber)
10) mainly used for dance:
Ballet, folk dance, pole dance, Latin dance, jazz dance, street dance, tap dance.
Three, rubber coil
Rubber flooring is natural rubber, synthetic rubber and other components of polymer materials made of flooring. Butadiene, high benzene, male butadiene rubber for synthetic rubber, is a petroleum by-product. Natural rubber is the artificial cultivation of rubber trees to harvest down the rubber.
Rubber flooring a wide range of practical scope of home balcony, kitchen, living room, bedroom, restroom recreational activities, gymnasiums, training halls, stage microcomputer room, substation, precision instrument manufacturing storage sound Firewood factory, fireworks factory, defense ammunition depot, warships non-slip deck office, office buildings, villas pedestrian walkway ship non-slip walkway nursery, kindergarten, senior citizen activity centers, in the Medium-sized children's playground baths, swimming pools, massage rooms, medical units shopping malls boutique room, the counter within the parade walkway a variety of social occasions of the welcoming floor, foyer, VIP room ballparks, sports runway roof waterproofing ballparks have seismic requirements of the goods yard.
Site requirements
① Prohibit the installation of the site temperature below 10 ℃.
② All subfloors must be dry, flat, crack-free, well-constructed, and clean. Free from dust, paint, paraffin, lubricants, grease, asphalt, decayed adhesives and other foreign impurities.
③ Rubber flooring with seamless splicing, splicing seams straight, smooth, bonded firmly, the appearance of no obvious color difference.
④ All hardening treatment, quenching treatment and destructive compounds can only be removed by mechanical methods.
⑤ The humidity of the subfloor should be less than 2.5%, and the subfloor with humidity higher than 2.5% shall not be recommended. If such humidity is higher than 2.5%, waterproofing should be carried out in accordance with industrial standards.
6 5 mm or less surface unevenness can be primed with self-leveling leveling.
Construction preparation
Rubber flooring should be moved to the construction site in advance, to adapt to the site temperature of not less than 24 hours, laying should be the first raw rows, and pay attention to keep the back of the floor in the same direction of the arrows, and then according to the topography and the design of the program for the splicing and cutting.
Construction Steps
A. Positioning Measurement
l Determine the center point of each end wall, and connect these points to the center part of the room by drawing a chalk line.
l Determine the center of this line and connect the two pairs of side walls by drawing a plumb line with chalk through the carpenter's straightedge.
B. Installation of Floor Blocks
l The room having been properly measured, you can use these measurements to measure a convenient and efficient starting point location.
l After the first row has been laid, adjust the floor blocks in that row to make a straight line by using a straight edge or tight rope.
l After the installation work has been completed, check the amount of paint per unit for a sufficient number of floor blocks.
NOTE:
- A proper trowel must be used to correspond to the proper grooves, thus ensuring sufficient adhesion.
--Rubber flooring blocks installed under pressure will not produce raised wrinkles.
C. Bonding the flooring blocks
l For ease of installation and maximum application time, pour the adhesive as quickly as possible onto the installation floor and spread it out.
l Use the recommended trowel to spread the adhesive while spreading it equally over the adhesive portion.
l Roll the surface of the floor with a 50kg tumbler to flatten out any voids in the adhesive to ensure that any air remaining in it is completely removed.
lCheck the slab periodically to verify that it has good adhesive extension.
D. Passage
After the slab on grade has been rolled, any passage should be avoided and the adhesive portion should be restricted, except for the necessary installer's caution. The adhesive should be walked on lightly for a full 12 hours. Frequent walking should be avoided for 24 hours. Under normal conditions, the adhesive takes 48 hours to fully set.
E. Subsequent Final Application
l Check that the adhesive is bonded to all surfaces.
l Prohibition of traffic within 12 hours.
l Prohibit frequent walking for 24 hours.
l Passage of heavy equipment or vehicles is prohibited for 72 hours.
l Protect the paved surface from sunlight, moisture and other construction labor during and after installation by covering it for 1-2 days.
l Maintain the recommended temperature (15 to 30°C) while the adhesive is setting.
l Avoid touching the originally cleaned and finished floor for 72 hours to allow the adhesive to fully set.
Note: When the adhesive is not fully set or the original consistency is so thin that it does not completely join the floor pieces, it will produce a slight buckling at the edge line. In this case, sandbags or weights should be applied to the buckled edge line until the adhesive is fully set and has adequate bonding properties.
First, adding 1 cup of fabric cleaner to every half-bucket of water used for cleaning can make a rubber floor look like it's been freshly waxed.
Second, using a multi-purpose cleaner solution works well for cleaning rubber floors. We first need to carefully read the precautions on the product label and it is best to test it at the corners of the floor before use.
Third, remove the footprints on the rubber floor can be dipped in liquid floor wax higher steel wool, wipe out the process to gently wipe off the stains, and then wipe dry with a damp cloth.
Fourth, to often use cleaners or wax strippers to get rid of the accumulated wax.
Fifth, solvent-based products may soften and ruin rubber flooring.
Sixth, never rinse the floor with water; too much water can dislodge the floor's adhesive.