The specific method is as follows:
1. First, move the host out and check the front panel and back panel of the interface on the computer. In addition to the power button, the front panel is generally equipped with two small round holes, green and pink respectively. The green round hole is used to connect audio, and the pink round hole is used to connect microphone.
There are many jacks on the back panel of the computer mainframe, which looks very complicated. But we just need to find the most critical sound jack. Excluding other jacks with different shapes, find a row of three or two rows of six jacks at the bottom. There you can see two round jacks, green and pink, the same as the front panel. The green round hole is used to connect the sound, and the pink round hole is used to connect the microphone.
3. There are two kinds of audio interfaces, one is one to two and the other is one to one. One-to-two means that there is one plug at both ends of the data cable connecting the computer and audio, and two plugs at the other end. One-to-one means one plug on each side.
4. Insert a single head into the green jack of the computer, and connect the two heads to the input jack of the stereo respectively, paying attention to the corresponding left and right channels. One-to-one data cable, just insert one end of the data cable into the green jack of the computer and the other end into the audio input jack.
5. You can see the socket settings on the audio equipment. There are four round jacks. The upper two jacks represent input/input. These two jacks can be connected to the computer with data cables. The bottom two jacks, which are written with OUTPUT/ output, are used to connect the two trebles of the stereo, and these two holes are used to connect the power supply of the stereo.
With the improvement of people's requirements for music quality, the quality of music will become better after computers are equipped with stereos.