How to install the lighting lamp How to remove the lamp tube?

Now there are lights at home. The function of lighting a lamp is to bring people light and get rid of darkness. In the past, people's living standards were too poor. There were no lights at that time. There is only one kerosene lamp. Mother sewed under the kerosene lamp. The students study hard under kerosene lamps. The light from kerosene lamps is very weak, which pollutes the air. Now that the living standard is good, every household has lighting. This problem will occur when the lighting is used, but it is broken.

Installation method of lighting lamp

Installation of lamps-how to remove the lamp tube?

First, check whether the old lamp tube is broken. Under normal circumstances, the cross-section using long lamps will appear gray. You should know that this situation is caused by the condensation of a substance inside the lamp tube in a high temperature environment. There are three clips around the lampshade, which can be rotated. Turn the clip with a screwdriver and remove the lampshade. Put the removed clip in a fixed position for reinstallation. When the lampshade is opened, you can see that there is a trough on the lamp tube. A wire extends from the central lamp holder and is inserted into the slot. This wire is plugged in, just pull it out. The lamp tube inside is fixed by three bent metals, which are elastic and can be broken with a screwdriver. You can remove the lamp tube and pay attention to the wiring inside the lamp tube.

Installation of lamps-how to install lamps?

The installation procedure of the lamp tube is just the opposite of the disassembly procedure. Fix the lamp tube, fix the lamp tube with the original three bent metal clips, tighten it with a screwdriver, then connect the wires, stick them with adhesive tape, fix them, and clamp the trunking on the lamp tube. Finally, install the lampshade, put back the three clips just removed and fix the lampshade. Turn on the power.

If it is on, it is a good light. Be sure to cut off the main power switch before operation. When removing the lampshade, small parts such as cards and screws must be put away so that they can be put back at last. Try to buy a new lamp, don't buy a broken one. After the reassembly is completed, open the main brake at home and turn on the power. Is the ceiling lamp on? In fact, the steps of how to change the lamp tube of this ceiling lamp seem simple, and it still needs some technical work.

Bian Xiao's introduction on how to install lighting is here. I believe everyone will know how to install it after reading it. Now that people's living standards are high, there are more kinds of lighting used at home. Each room has its own special lighting, such as the bedside lamp in the bedroom, the chandelier in the living room and the ceiling lamp on the balcony. It is not as simple as installing an energy-saving lamp, but it is still very complicated. Bian Xiao summarized the installation methods of different lighting here. If you need to install it,

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~