2, right-click will pop up a dialog box, there are cut copy paste and other options, which choose to copy. The following figure.
3, and then return to the computer desktop, left double-click to open my computer/computer. (Has the u-disk connected to the computer)
4, point open, there will be a c-disk d-disk e-disk and so on, click on the inserted that u-disk, removable disk.
5, in the open page, right-click the blank space, click paste, and then downloaded to the u disk, very convenient.
Extended information
General u disk is composed of flash particles and control chip and usb interface, data stored in the flash particles, the control chip is responsible for interconnecting with the computer, exchange of data, usb interface is the socket, usb port has four copper, of course, usb3.0 more than just four copper, but the usb2.0 has already been able to illustrate the problem, the left and right of the two long, and the middle two short. And two short ones in the center.
This way, when we pull out the USB flash drive, the left and right ones will cut off the connection to the computer first, followed by the middle one. The left and right ones are suitable for power supply, while the middle one is responsible for transferring the data, no matter how to operate, it is sure to cut off the data transfer first, and then cut off the power supply, and with such a design, you can reduce the damage of the hardware to realize the hot plug.
However, hot-plugging only reduces hardware damage, he can't reduce data damage, and can't eliminate hardware damage, so the u-disk is unplugged when finished and not operated on the computer, there is also a risk of damage, in order to data and hardware security, it is best to safely uninstall the hardware before unplugging the u-disk.