Home gym admission ticket

What must be done in garage decoration is moistureproof. Therefore, when choosing garage decoration, you must choose materials with high moisture-proof performance, and don't bother to save money. When the garage floor is treated, stone and marble with good bearing capacity are selected as the floor, the wall is treated with wallpaper and paint, and the ceiling is treated with gypsum board.

How to improve the storage space of the garage?

In fact, the ceiling can provide a lot of storage space. If the hooks are fixed, bicycles and ladders can be hung. The wall surface can also be fixed with hooks to scrape garage auto repair tools, which saves space and is beautiful.

What is the minimum height of the garage?

It is best to choose the height of the garage above 2.5m, and less than 2.5m will make people feel oppressive. Furthermore, if the garage is too low, it will hinder the opening and closing of the skylight and trunk.

What floor paint should be laid on the garage floor?

Among the garage floor paints on the market, epoxy resin floor paint is widely used, which can effectively avoid the dust caused by the stopping of vehicles, especially in rainy days, and can effectively prevent mud and water stains in parking lots. The garage floor is protected by such floor paint, which is easy to clean.

What functional room can the garage be transformed into?

1, home office: you can consider putting a bookshelf in it to put books and other supplies; You also need a blackboard or whiteboard wall; There are colorful artworks that can light up your mood; You can also set up a comfortable seating area (if space permits).

2. Game room: Is there a better place for children to play than the garage? The durable floor can hold some toys of different sizes and children's toy train tracks, which will form a messy artistic beauty. Of course, you can also match it with a soft carpet and an oversized pillow.

3. Recreation room: You can set up an electronic game machine, a billiard table, a flat-screen TV in the recreation room, and even turn it into a special board game venue.

4. Craft room: In this transformed space, painting, beads, sewing, etc. Can be made indoors. The designated processing room can also be an ideal place to design packaging paper. This idea can be realized by adding a long counter on one wall of the garage. You can also consider putting a cork board on it, or trying to use chalk or magnetic paint, so that you can outline some new pictures, or post some photos that give your soul.

5. Home Gym: Put rubber tiles and some yoga mats on the floor, and you will have your own yoga space where you can breathe and stretch quietly. You can also consider setting up a way to play music here, whether it is a built-in speaker or a Bluetooth speaker.

Garage foundation treatment method

1. First, the cement floor is treated. Fresh concrete needs to wait for at least 28 days. Remove stains and residues from the surface. Remove all oil stains and grease, clean the floor with a suitable detergent or degreasing solution, and then rinse it off. If the floor is painted, make sure it is clean and dry. Remove loose or warped paint film with wire brush. If the floor is coated with sealant, it should be cleaned by grinding or shot blasting. To ensure better adhesion, please polish the whole surface.

2. Stir the floor paint evenly to ensure that the pigment can be fully dispersed in the solution.

3. When the surface temperature of air and materials is 15-29 degrees Celsius, the surface temperature is not lower than 3 degrees Celsius and the relative humidity is not higher than 85%, the construction can be started. Stir well, and roll the surface for the first time with a 4-inch artificial roller. Each roll coating area shall be controlled within the range of1.2m *1.2m.. If it is necessary to decorate the color film, the color film should be evenly sprinkled on the wet paint film surface. Then move on to the next step.

4. Immediately after the construction, clean the tools with warm water and neutral detergent. Note: the new paint can be directly roller coated on the color film on the coated surface. The edges should be kept wet to prevent overlapping marks and gloss differences. Finally, the coating should be rolled in one direction to ensure the final effect is consistent. In most cases, you only need to roll once.