Installation of outdoor fitness equipment:
1. Buried equipment columns should be firmly fixed on the support plate or lateral support;
2. The horizontal size of the concrete foundation pit for each column of outdoor fitness equipment installation should be greater than or equal to 400mm*400mm, and the concrete foundation should not be set to a small upper part and a large shape;
3. The concrete used for the foundation of pouring equipment should be higher than C20, and someone should monitor it before the foundation is completely solidified;
4. Buried depth of equipment column: when the ground height of equipment is 2000 mm, it should be greater than 500mm; when the ground height of equipment is between 1000 mm and 2000mm, it should be greater than or equal to 400mm；; When the height is 1000mm, it should exceed 300mm, and there should be a concrete support layer with a thickness greater than or equal to1000 mm below the bottom of the equipment column;
5. After the outdoor fitness equipment is installed, the installation ground should be vertical, the column should be vertical to the main body, and the vertical tolerance should not exceed1100;
6. Outdoor fitness equipment should be installed with soil. Within the depth of 800mm from the surface, it should be a non-loose geological structure of non-sandy loam and Class II hard soil, and the tightening coefficient should be not less than 0.7; Otherwise, it is necessary to wait until the soil is effectively treated before installing the equipment;
7. The ground within 0.5m of the outer edge of the equipment foundation should be hardened, such as: concrete is hardened, and the soil is compacted before laying; The hardened surface of the equipment foundation and its surroundings should be lower than the ground around the installation equipment.