There are many ways to install the belt buckle of conveyor belt, depending on the parameters of different belts, so how to install the belt buckle of conveyor belt?
1, lock the connection
The conveyor belt connected by locks is cut to a certain size, and the joints are connected together by locks. The locks at both ends are connected by a steel bar, which has the characteristics of convenient disassembly and simple installation. Therefore, it is not necessary to remove the roller during installation, and the steel bar can be inserted after the joints on both sides are aligned.
2, thermal vulcanization connection
The conveyor belt connected by thermal vulcanization is connected by adjusting the precise temperature and pressure. Before connection, the belt should have teeth, and the produced belt interface can withstand high tension, and its appearance is basically the same as that of other parts of the belt. The conveyor belt connected by this method has the characteristics of beautiful appearance, overall regularity and strong interface tension.
Second, what are the precautions for the installation of conveyor belt buckles?
1. Before construction, turn the operator of the belt control switch to "zero position" for locking, put up the sign "No closing when someone is working" and assign special personnel to guard it.
2. The person in charge of the construction shall arrange personnel to clean up the sundries in the buckle of the belt conveyor to ensure the smooth exit of the construction.
3, belt buckle workers must be under the guidance of the construction director for construction work, the construction unit must have cadres on-site command, to ensure construction safety.
4. When replacing the belt joint, you should first pull the belt joint that needs to be replaced to the middle of the belt conveyor, loosen the belt, and use two pairs of splints to clamp the belt. After clamping the belt, use chain block to tighten the belt, and strictly set the electric or starting belt to tighten the conveyor belt.