Log in to the router management page. The user name and password can be found on the label on the back of the light cat.
Switch to Network-LAN Address Configuration and enter the ip address and mask of the LAN. Because you need to use your own wireless router, the DHCP server is disabled here, and then "stored" here, taking 172.4438+06.2.6438+0 as an example.
Turn off the wireless function of Telecom Optical Cat, switch to the "Network"-"WLAN Configuration" page, remove the check in front of "Enable Wireless" and save.
Restart the router and exit.
Let's configure the TP-Link router. The default login ip of the same TP-Link router is also 192. 168. 1. If not, please refer to the user manual. Usually, the router login information is printed on the label on the back of the router.
To enter the setting of "network parameters", you must first set the "LAN port setting", because the optical cat of Telecom was set to172.16.2.1,so it cannot be set to 172. 16.2.x here.
Set the WAN port of TP-Link router in one step, where the connection type of WAN port is set to "static IP" and the IP address is set to 172. 168.2.2. This IP address cannot be the same as that of Telecom Optical Cat, but it must be 172. 16.2.x, which is the same as the mask of 255.255. That is172.16.2.1. Of course, you can also enter the DNS server IP, which is optional.
You can surf the Internet through the TP-Link router here, but the purpose is to turn on the wireless and switch to the "wireless demonstration" page. We input the SSID number and select the frequency band, which is usually automatic, and we can also select the mode. My wireless router is relatively old, and it can support 802.438+0 1g at most. If it is relatively new, you can use 802.4038+06438. Click to turn on the wireless function. For security reasons, you must set security options at the end. You can choose WPA-PSK/WPA2-PSK as the security type, and finally enter the security key. That's all.
How does the optical cat of telecom connect to the wireless router? First, connect:
Connect the network cable from the optical cat to the WAN port of the wireless router. This must be connected. There are letters on the router connection. If the connection is wrong, you can't get online.
The router settings are as follows:
1, connect the computer network cable to the LAN port of the router, or directly connect the computer to the default wireless of wireless routing, with no password by default.
2. Enter the address you saw on the router in the browser, usually 192. 168. 1 or192.168.0./(on the label on the back of the router).
3. Enter the corresponding account and password, and the default is admin. Enter the operation interface after confirmation.
4. Set up the Internet. Click the installation wizard. Click Next to enter the Internet access mode settings, and we can see that there are three Internet access modes to choose from.
A, if your home is dialing, then use PPPoE, and then enter the broadband account and password.
B. Dynamic IP is generally used when there is a route on this route.
C, static ip is usually a private line or something, or it may be the bandwidth of the cell. If you are given an ip Internet access instead of an account password, just use this and enter your IP.
5. Wireless settings. Set the wireless name (SSID) and enter the wireless connection password.
6. After clicking, restart the router.
Then the computer should be able to surf the internet in the future.
In addition: the location of the general wireless router is very important. When the home is big, don't put it in the corner, so there will be no signal in the distance. Try to install it in the middle of the home, preferably more than half a meter off the ground. This will make the signal in all parts of the house very good.
Can a telecom cat wirelessly connect to a wireless router? Light cats have no wireless transmission function. Only one cable can be used to connect the optical cat with the wireless router, and it is best to have a wifi signal at home. Two or more will interfere.
How does a telecom optical cat connect two wireless routers? First, a telecom optical cat can connect two routers in the form of "optical cat-router-router".
Second, the router is connected to the router and a second router is set. There are two methods (assuming that the first router has been set up, and then the router has also been set up):
The first method: dynamic IP mode (the first route is the master route and the second route is the slave route).
1. Plug in the slave router, do not connect the LAN port of the master router yet, and reset the slave router (return to the factory);
2. Connect the computer from any LAN port of the router and enter the setup page;
3. Set according to dynamic I P mode;
4. Then set the SSID, encryption method and password;
5. Save and restart;
6. After the setup is completed, connect the network cable from the LAN port of the master route to the WAN port of the slave router.
The second method: wireless AP mode
1, first connect the computer from the LAN port of the router and change the IP address of the slave route. For example, most router addresses are 192. 168. 1. We just need to change the IP address of the router to192.168.10.
2. Turn off the DHCP function of the slave router in the settings;
3. Finally, connect the network cable of the master router to the LAN port of the slave router (whichever will do), and be careful not to be the WAN port.
How does the optical cat of telecom connect to the wireless router? Yes, you can buy a router and ask him to set it up for you. You can pretend it yourself when you go home.
Telecom light cat connected to the wireless router ... I want to reset the password of the wireless router. . But hello, dear users.
I hope the following answers can help you:
Enter 192. 168. 1 to enter the telecom login interface, indicating that the setting address of the router conflicts with that of the telecom cat used at home, and the setting interface of the telecom cat is preferred.
Solution:
1. Don't pick cats when setting up the router. Pick up the cat after you set it up.
Don't answer the cat when the wireless router is plugged in. Connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (on the label on the back of the router), and enter the settings page to make settings.
2. Change the IP address of the router LAN port.
You can change the IP address of the router LAN port from 192. 168. 1 to192.10/,so that you will not enter the setting page of the telecom cat when setting up the router.
China Telecom provides the best network communication service. If you need related services, you can inquire directly through the telecom online business hall or the entity business hall.
Anhui Telecom will serve you wholeheartedly.
A wireless router is installed at home, but the signal is very poor! (1) On the wireless router, we can start from the following aspects:
The self-transmitting power is small, which leads to the improvement of weak signal; 5dBi antenna is recommended. If your router antenna is detachable, the signal is strong. Thought I was JCG JHR- N835R high-power wireless router with strong signal;
② Is the notebook wireless network card compatible with signal reception? Incompatibility often leads to disconnection. The solution is to update the driver of the wireless network card, or the incompatible encryption function often leads to disconnection, and change the wireless encryption key of the router.
③ Signal reception interference; , own a simple, yes, cut some twigs in the box, and then install the antenna of the wireless router;
④ It is suggested to be in the middle room on the router, because the omni-directional antenna of the wireless router is spherical in the range covered by wireless signals; /& gt； ⑤ Changing the channel used by routers will lead to more routers and weaken the signal;
The above five points are the common reasons why the general wireless router often drops the line, I hope to help you;
How does the wireless router answer the telecom light cat? Hello, just connect the lan port of the broadband cat with the wan port of the router with a network cable, and then connect the lan port of the router with the network card of the computer, but the router needs to set independent variables before it can be used.
The new telecom demon card has a monthly domestic traffic of 6GB, and gives away caller ID and 189 mailbox. Domestic answering is free, and the package fee is 19 yuan. If necessary, you can log in to the Telecom Network Office to handle:
: Ah. 189. /iphone/ext/lmwk/index。 ? DevCode = ah00f 00507/y 34000053396/003
How does the optical cat with wireless routing connect the wireless router 1, the network cable from the optical cat to the router's WAN port, and the router's LAN port to the computer?
2. After starting the device, open the browser and enter 192. 168. 1 in the address bar to enter the wireless router setting interface. If you can't get in, please look at the nameplate at the bottom of the router or the instruction manual of the router. The preset settings of different routers are different. )
3. The account and password for logging into the router will appear in the setting interface. Enter the default account and password admin, or refer to the instruction manual.
4. After successful login, select the Setup Wizard interface, which will pop up automatically by default;
5. After selecting the setup wizard, a window will pop up. You can set the basic parameters of the router through the wizard and click Next.
6. According to the step-by-step setup of the setup wizard, select the Internet access mode. Usually ADSL users choose the first PPPoE. If they use other Internet service providers, choose the following two options according to the actual situation. If they don't know how to choose, they can directly choose the first item for automatic selection, which is convenient for beginners to operate. After selecting, click Next.
7. Enter the account number and password applied from the Internet service provider, and then proceed directly to the next step;
8. Set the wifi password, and try to make the alphanumeric combination more complicated and not easy to be hacked.
9. If the input is correct, you will be prompted whether to restart the router. Select Yes to confirm to restart the router, and then you can surf the Internet normally.
How to get a wireless router for a telecom cat is very simple. Step one. Plug one end of the network cable into the computer. Plug one end into any socket of the router. Don't interrupt the main entrance. Open the webpage. Enter the IP on the router to enter the router settings page. Find a function to bind broadband users and passwords. Determine after binding. Then find a function of wireless security settings. Change the initial wireless password. Of course. It doesn't matter. If you still don't understand, add me as a friend.