The production site is an important place for production, and it is also the place where front-line employees work every day. Some potential safety hazards and emergencies at the site should be promptly investigated and actively prevented to ensure normal production order and personal health and safety.
Second, the matters needing attention are as follows:
1, before entering the production site, you must wear labor protection articles correctly, and you must not drink alcohol within four hours before going to work.
2. When entering the production site, you should consciously walk along the safe passage, and be alert to the surrounding trends at any time to guard against emergencies.
3, post personnel must be familiar with the start alarm, overpressure alarm, fire alarm, call signal and other sound and light signals.
4, safety signs should be clear and complete, should strictly abide by the contents of the sign, don't fool around.
5. Sufficient light is needed in the production process. When the light is insufficient, the lighting facilities should be turned on, and the lighting facilities should be enabled normally.
6, are not allowed to walk on the equipment or across the running equipment, more can't rest and play near the running equipment.
7, the site should be kept clean and orderly, mechanical equipment and electrical equipment to reasonable protection, and regular maintenance.
8. In the workplace, sharp scraps, temporary occupation of safe passage, collision and falling factors may cause dangers. If it is caused by cutting the board, it should be eliminated consciously or warning signs should be hung to remind others.
9, timely find the abnormal situation of facilities and equipment, timely report to the superior.
10, in production, operate in strict accordance with the "Process Operation Regulations" and "Equipment Safety Operation Regulations" to prevent accidents.
1 1, the construction site shall maintain complete fire control and protective safety facilities and conduct regular inspections to ensure their safety and effectiveness.
12. Before the equipment is started, it is necessary to comprehensively check whether there is any abnormality and whether there are personnel activities around it. Ensure safety before starting.
13. When overhauling the equipment, in order to prevent sudden misoperation, pull down the main brake and hang warning signs such as "Overhaul, do not switch on".
14, electrical equipment to prevent leakage, often check whether the equipment grounding or zero is good.
15, the production site should be clean, and the air should be circulated to prevent the accumulation and leakage of flammable substances such as oil, paint, petroleum gas and diluent from forming hidden dangers.
16. Smoking is strictly prohibited in inflammable and explosive places. When welding operations must be carried out, isolation measures and ventilation conditions must be ensured, and operations can only be carried out when they are approved by superiors to be suitable for operations.
17 stop sending should be strictly in accordance with the "distribution room management system" and "opening and closing operation procedures" assign personnel to perform.
18. After work or leaving the post for a long time, close the water, electricity, gas and windows, cover the unused paint and thinner tightly, tidy up the wires, cables and trachea, and put the inflammable and explosive articles back into the special isolation room.
Safety production requirements and matters needing attention [2]
In order to strengthen safety management, ensure the safety and health of employees, maintain the normal production order of the company, and clarify the safety responsibilities of employees, new employees must pay attention to and abide by the following matters:
1, strictly observe the post and operate cautiously; Don't leave your post without permission and do things unrelated to your job.
2. It is forbidden to smoke and use fire in workplaces, warehouses and other non-smoking areas. If it is necessary to use an open flame on business, it must be reported to the company leader for approval.
3. Use all kinds of office equipment and facilities correctly to avoid property loss and personal injury.
4. Properly handle and keep all kinds of paper documents, bills and electronic documents to ensure that they are not leaked or lost.
5. Operate in strict accordance with the procedures and specifications of process and equipment safety requirements, and refuse to operate without safety operation procedures.
6. It is forbidden to engage in all kinds of operation activities in case of inadequate safety measures and violation of regulations, and it is forbidden to violate labor discipline.
7. When wearing and using labor protection articles, do a good job of labor protection and wear and use labor protection articles correctly.
8. Dress neatly and generously in the workplace. It is strictly forbidden to engage in homework activities shirtless and wearing slippers.
9. In case of emergency at work, you should handle it correctly and report it in time. If it cannot be handled, it shall immediately report to the relevant departments.
10, correctly use and maintain the mechanical equipment and tools (including transport vehicles) of this position, report the mechanical equipment failure to the person in charge of the competent department immediately, and appoint professionals to repair and troubleshoot the failure.
1 1. If the goods need to be loaded and unloaded, rough loading and unloading is not allowed. Pay attention to the safety of personnel and articles to avoid accidents. Use and handle dangerous chemicals in strict accordance with the operating procedures, and it is strictly forbidden to take them without permission.
12. Don't touch the electrical equipment in the workplace at will. When using all kinds of electrical equipment, you must pay attention to the safety of yourself and people around you, and don't use electrical equipment in case of failure.
13. Personnel must turn off and cut off all kinds of electrical equipment, such as computers, electric fans and lighting lamps. After work or leave the workplace.
14, know how to use fire hydrants, fire extinguishers and gas masks correctly, and know all kinds of fire safety signs.
15, always pay attention to whether there are unsafe factors in your working environment, such as water seepage, wall cracking, tile peeling, etc. Report to the safety director of the unit in time, so as to quickly investigate the danger.