A complete description of the renovation process of new houses in summer
New house decoration technology
(1) Pre-design
In the preliminary design, one thing that must be done is to make a detailed study of the room. The measurement contents mainly include:
1, the area involved in the decoration process is clear. Especially in tile area, wall coating area, wallpaper area and building area;
2. Clear the size of the main wall. Especially it is necessary to design the wall size of furniture in the future. By the way, I would like to remind you that before starting work, don't forget to go to the property to complete the construction procedures and pay the decoration deposit.
(2) Demolition of main body
When entering the construction stage, the main body demolition is the first project, which mainly includes demolition, wall construction, wall peeling, plastic steel windows and so on. The main body of demolition is white, that is, the framework of the construction site is put together first.
(3) Hydropower transformation
Before the waterway reconstruction, the main structure was basically demolished. The first cabinet test should be carried out between hydropower transformation and main body demolition. In fact, the so-called initial measurement of cabinets has no actual content, because the walls and floors have not been treated, and the cabinet designer can't give specific design dimensions, just the location of the water inlet and the socket of the range hood reserved by the developer, and put forward some relevant suggestions.
(4) Woodworking
Woodworking, bricklayer and oiler are the "three brothers" in the construction process. The basic order of appearance is: wood-tile-oil. The basic principle of appearance is-whoever is dirty comes first. "Dirty people first" is also one of the basic principles that determine the order of home improvement.
(5) Tiling
If the workers are too busy, the foreman will usually let the carpenter enter the tile before the "carpenter boss" has finished. This is normal, because the two do not conflict. In the process of "watt worker", the following three links are also involved:
1, door stone, marble windowsill installation. The installation of stone can be completed with paving bricks. After paving, marble thresholds are usually installed after the window sill is completed. Marble workers prepare glass glue and seal marble and curtains with glass glue. It is.
2. Install the floor drain. Floor drain is the first hardware in home decoration, because it will be installed with floor tiles. So when students start building materials, they should buy floor drains as soon as possible.
(6) Paint the wall
The "oil worker" comes into the market, mainly to do wall treatment, paint finish and brush furniture for the "carpenter boss". Students who are ready to paste wallpaper only need to let the "oil pan Lao San" carry out primary treatment on the wallpaper wall.
(7) Installation of water heater
Wall and floor decoration can inform the water heater of delivery and installation. Water heaters are generally installed in front of the ceiling, and gas water heaters have become a trend, generally installed in the kitchen or closed balcony. If it is an electric water heater, install it in the bathroom.
(8) Ceiling of kitchen and bathroom
Install the water heater, and then the ceiling. The kitchen and bathroom ceiling dominates the installation process, and they continue to "clear the package" at home. At the same time as the ceiling of the kitchen and bathroom, the moisture-proof ceiling lamp and exhaust fan (Yuba) in the kitchen should also be bought. Usually, the kitchen and bathroom are equipped with ceiling lamps and exhaust fans (toilets) at the same time.
(9) Cabinet installation
After the ceiling is finished, you can install the cupboard door. At the same time, there are sinks (which may not include the upper and lower water parts) and gas stoves. It is best to coordinate the gas supply to the property before the cabinet is installed, because the gas stove needs to be tested after installation.
(10) cookware for installing smoking machine
The installation of the range hood is best arranged on the day when the cabinet is installed, so as to facilitate the coordination between the two owners.
(1 1) wooden door installation
The second day after the cabinet was installed, after the wooden door was measured a month ago, it can be installed now. Hinge, door lock and floor suction head are installed at the same time as the door is installed. The production cycle of solid wood doors is generally one month. Therefore, in order to make the construction period close, it is necessary for wooden door manufacturers to go to the door to measure the size of the door as soon as possible after removing the main body. Everyone needs to pay attention to the handling of doorways. If the height of the doorway of the house is not consistent, workers need to process it into an outline-beautiful.
(12) Floor installation
The floor can be installed the day after the wooden door is installed. When installing the floor, please pay attention to the following questions:
1, before the floor installation, it is best to let the manufacturers visit. No matter whether the ground needs leveling or partial leveling, some decoration companies or teams will advise students to level or partially level according to the actual investigation of floor manufacturers;
2. Before the floor is installed, the floor laid at home should be clean, the ground should be dry, and no water should be used during the cleaning process.
(13) Paving wallpaper
The second day after the floor was installed, the house was cleaned and wallpaper could be pasted. If it goes well, it will be the same day. If possible, protect the floor on the day of sticking to the wall; It doesn't matter if there are no conditions. It is no problem to give the wallpaper glue left on the floor to Pioneer for cleaning.
(14) switch socket installation
In the bathroom, all sockets and switches must be waterproof and covered with sockets. At the entrance of the switch of the lamp, it is recommended to use induction or fluorescence to go home in the dark and keep it dark. There can be no more switch sockets, and at least one socket should be reserved where the sockets are placed.
(15) Lighting installation
Light up, nothing to say. After the lamps were installed, the house lit up, saying goodbye to the glare of 100 watt incandescent bulbs during the decoration process-it felt good.
(16) Hardware installation
Before buying pipes, bathroom accessories, toilets, clothes hangers, etc. , all installed. After installing "big things", the house is still very cold. When the lamps and hardware were installed, the family was "alive", really "alive".
(17) Installation of curtain rod
The installation of curtain rod marks the basic end of family decoration. You can breathe a sigh of relief, and the dark decoration that has been busy for a few days has finally ushered in the dawn.
(18) Pioneer Cleaning
Clean up before development, and don't install curtains. When starting a business, don't have furniture and unnecessary appliances at home, and try to keep it "flat" so that the business can be thoroughly cleaned.
(19) Furniture Introduction
As for the purchase time of furniture, my suggestion is that the water circuit should be reformed as soon as possible, so that you can choose furniture with basic size range.
(20) Home appliances are approaching
At this time, home appliances should enter the site, be installed and be ready to move in!
(2 1) Home Accessories
Home improvement, the last step of home improvement, has changed from decoration to decoration, including the installation of curtains, which are all part of home improvement. As for buying curtains, you'd better order furniture to avoid style conflict. Home accessories also include the possibility of buying some green plants, murals and displaying handicrafts. In short, you can play freely after you check in.
Matters needing attention
Matters needing attention in decoration 1
Buy wall paint and choose environmentally friendly wall paint. General environmental protection wall coating brands, such as Bangpai coating, Nippon coating, Lily coating, Dulux coating and Gan Long coating, will pass IS0900 1 international quality system certification, ISO1400/environmental management system certification, 3C mark certification, China environmental protection product certification and China environmental label product certification to ensure the use of the healthiest products.
Precautions for decoration 2
Please don't buy insulating tape and raw material tape directly from the store. The quality of large supermarkets is much better and the weight is enough. This kind of conversion is still relatively affordable.
Decoration description 3
When installing the door lock, be sure to put some wax on the lock tongue. If the door lock is damaged and waxed, it will be too late. In the absence of a door stop, it is also necessary to pay attention to whether the door handle will be damaged by hitting the wall.
A complete collection of technical precautions for new house decoration in summer
Family decoration is a major event in life, so you must know the relevant information of family decoration before decoration, so as not to worry. Then, the above is an introduction to the summer house decoration process. Want to know more about home decoration, please continue to pay attention to us?