1, unique nipple design
Because ordinary bottles always spit milk because they breathe in air, and they can't feed too much at a time, Dr. Brown's bottle solves this problem very well. It can effectively prevent air sucking, make the baby eat smoothly, and obviously improve flatulence, burping and vomiting caused by sucking bubbles. This characteristic initially answers whether Dr. Brown's bottle is good or not.
2, unique accessories
Dr. Brown's bottle has special accessories and different nipple diameters, which are convenient for mothers to use. For example, 250# standard bottle and 450# wide-mouth bottle are equipped with patented built-in air guide system, stainless steel cleaning brush, nipple with flow rate of 1 and detailed instructions for use. The difference is that the 450# wide-mouthed bottle has a large caliber, is easy to hold liquid, and is relatively stable and difficult to tip over, while the wide-mouthed nipple, such as the mother's nipple, will make the baby feel more comfortable to suck. In addition, children over three months must be equipped with a nipple with a flow rate of 2.
3, it is convenient to carry and has many benefits.
Convenient carrying is a major feature of Dr. Brown's bottle. The accessories attached to it have a "leak-proof sheet", which is a white disc. Its function is to prevent the milk from leaking from the nipple when going out and taking it off when feeding.
How to use Dr. Brown's bottle Dr. Brown's bottle is a special baby bottle produced by Dr. Brown Company in the United States. The uniqueness of Dr. Brown's bottle lies in its patented design-built-in airway, which can eliminate air bubbles in milk. Facts have proved that air bubbles can cause stomach cramps, vomit milk, burp and even the loss of vitamin C. Unlike other bottles, Dr. Brown's bottle delivers milk through positive pressure, which is exactly the same as the principle of breastfeeding. So how should Dr. Brown use the bottle? The following mother's online encyclopedia brings some ways to use Dr. Brown's bottle.
1, install the bottle
When you buy a bottle, it contains all the accessories. Cover the airway tightly with a suction aid and a bottle. Note that the suction aid should cover the bottle mouth and do not loosen it. Then put the bottle on and tighten it. Even the finished product should be disinfected before installation. Don't give it directly to your baby after buying a bottle.
2. Mixed milk powder
Pour some hot water first, then add a little milk powder. After stirring evenly, continue to add hot water and milk powder and stir again. This will not cause many bubbles in the milk and prevent the baby from inhaling air. It is also necessary to calibrate during this time to satisfy the baby's appetite, not too much nor too little. When punching holes, you should also know that it should not be too thin or too thick, and it must be moderate.
Step 3 feed the baby milk powder
The baby's best feeding posture is that the body is at a 45-degree angle, and the milk will fully flow into the baby's stomach. The temperature of milk should be about 40 degrees, and the way to judge it is to drop a few drops on the back of an adult's hand, as long as it is neither too hot nor too cold. It is best to give the baby milk. Don't feed the baby when it is laughing and crying. This will make the milk flow into the baby's trachea, causing suffocation, and in severe cases, it will lead to suffocation. The baby should be given a quiet environment to concentrate on drinking milk.
How long will Dr. Brown's bottle last? Bottle is one of the most commonly used household appliances for babies. The quality of the bottle is directly related to the baby's health, so parents attach great importance to the choice of the bottle, but there are still many misunderstandings. So how long can we use Dr. Brown's bottle? Explain it to us in mom's encyclopedia.
Generally speaking, breast-fed babies do not need special hydration before 6 months, and the frequency of bottle change is about 4 ~ 6 months. Therefore, before the baby is born, prepare two 120ml vials for drinking water or juice, and then prepare two or three 250ml vials. When the mother goes to work or can't breastfeed herself, she can squeeze her mother's milk into a bottle, put it in the refrigerator and use it again if necessary.
Bottles have a service life, especially plastic bottles. After a period of use, the bottle body will appear fuzzy fog or milk scale accumulation due to brushing and oxidation. It is recommended to replace it every six months. But if the surface is damaged and worn, it must be replaced with a new one. Glass bottles can last longer. Pacifier is a consumable, which will harden and deteriorate after long-term use. The more times of disinfection, the faster the aging speed. Therefore, it is recommended to replace the silicone nipple every 30 days and the latex nipple every 2 1 ~ 30 days. Similarly, once it is damaged, it should be replaced with a new one immediately.
How Dr. Brown disinfects the baby's bottle is fragile, and the stomach and intestines are most susceptible to infection. We often say that illness comes from the mouth. In order to make the baby eat healthier and happier, mothers must remember to clean and disinfect the baby after using the bottle. The following encyclopedia of mothers. Com brings the disinfection method of Dr. Brown's bottle.
1, boiling disinfection method
Take a stainless steel pot, pour in cold water, then put the bottle into the pot, cover the pot, then boil the water to achieve the purpose of disinfection, then take out the bottle, dry it and store it for later use.
2, steam disinfection pot
The steam sterilizer also adopts the principle of high-temperature sterilization, that is, the feed is first poured into the sterilizer and heated to become steam, and the temperature is above 95℃, thus killing bacteria. The whole disinfection process takes about 15 minutes.
3, ultraviolet disinfection pot
The biggest difference between ultraviolet sterilizer and steam sterilizer is that ultraviolet UVC is used to destroy the structure of bacteria, so that it can not continue to replicate, thus achieving the sterilization effect, so there is no need to add water. Because of this, the ultraviolet sterilizer can be used to sterilize not only baby bottles, but also tableware, dental trays and small toys for older babies.
The price of Dr. Brown bottle There are many kinds of Dr. Brown bottle products, which can be divided into glass bottles, PES bottles and PP bottles according to materials; According to the caliber, it can be divided into standard caliber and wide caliber, and according to the capacity, it can be divided into 4 ounces, 8 ounces, 10 ounces, 1 1 ounce. Let's know the price of each type of avent bottle separately.
4 Anshi/120ml standard baby bottle $75.00
8 oz/240ml standard baby bottle $78.00
4 Angus/120ml wide-mouth baby bottle $85.00
8 oz/240ml wide-mouth baby bottle $88.00
The above is part of the price of a bottle of Dr. Brown. I hope that parents should understand some basic information of Dr. Brown's bottle when buying it, such as capacity, caliber, material and so on, because only by choosing the right one can the baby grow healthily.
In addition, it should be noted that when using Dr. Brown's bottle, please clean your hands before each use, and pull up the nipple before each use to ensure that there is no tear. If the nipple is found to be worn, such as cracks or deformation, the nipple should be replaced. The liquid capacity should not exceed the top scale line, otherwise the liquid will overflow from the bottle cap.