1, the temperature should not be too low.
Don't adjust the temperature of the air conditioner very low in summer, but adjust it to around 26℃, which is cool and saves electricity. Every time the air conditioning temperature increases by 1 degree, it can save electricity by about 10%.
Many friends may enjoy the feeling of blowing air conditioning under a quilt. But in this way, the general air conditioner will be turned on relatively low, which is a waste of electricity. It is better to turn up the air conditioner and cover the sheets.
2. Don't switch the air conditioner on and off frequently.
Many friends like to turn the air conditioner on and off frequently. For example, in summer, when the temperature drops, they turn it off, and when the temperature rises, they think it saves electricity. But in fact, frequent switching of the air conditioner will keep the air conditioner on all the time, but it will consume more electricity.
So when the indoor temperature drops in summer, don't turn off the air conditioner in a hurry. Turn up the temperature and turn down the air volume.
3, take a breath in advance, less open doors and windows.
I suggest you change the air in the room before using the air conditioner. First, close the window and turn on the air conditioner to keep the indoor air fresh. Second, you can save electricity without opening the window for ventilation. The two-bedroom air is completely replaced, which is enough for two people to consume 1.5 hours in an air-conditioned environment.
If you forget to take a breath or the breath is not in place, the room is too stuffy and you want to open the window for air, then the gap between the windows should not exceed 2 cm. In the use of air conditioning, we should control the opening of doors and windows as much as possible, and draw curtains in summer, which will save electricity.
4. Turn on "Auto" mode
Many friends think that "breeze" mode is the most energy-saving, but in fact "automatic" mode is the best choice. Air conditioners consume the most electricity when they start to cool indoors. When the room temperature is the same as the set temperature, the power consumption will gradually decrease.
So if you switch to the "breeze" mode, it will take a lot of time and electricity before it gets cold indoors. The "automatic" mode will select the most suitable air volume and wind direction according to the room conditions, so that the indoor temperature can meet the cooling requirements quickly and evenly; When the room is cool, it will control the power consumption and maintain the set temperature. Therefore, the "automatic" mode should be intelligent and save electricity.
5. Choose a suitable exit angle.
Appropriate air outlet angle will make the air temperature reach the set temperature faster.
In summer, when the temperature becomes lower, the cold air flow is easy to go down, and the upper part is hot air flow. If the air outlet is changed to upward during cooling, the cooling effect will be better and more energy-saving; In winter, hot air flows upward and cold air flows downward. If the air outlet is changed downwards during heating, the heating effect will be better and more energy-saving.
6. Skillfully use "sleep" mode and "timing" function.
When you sleep at night, you can turn on the "sleep" mode, or use the "timing" function regularly to turn off the air conditioner around 4 am, and use the residual temperature to sleep until you wake up. You can choose two ways according to your own situation.