① How do inspectors register?
The professional subjects of inspector examination are: materials, highways, bridges, tunnels, traffic saf
① How do inspectors register?
The professional subjects of inspector examination are: materials, highways, bridges, tunnels, traffic safety facilities and electromechanical engineering tests. Inspectors should pass any professional subjects and issue certificates. 2 highway and waterway engineering test inspector's examination type in the provincial transportation related departments. The specific matters of the examination are hereby notified as follows: 1. Conditions for applying for and testing the examination. Applicants for testing and testing examinations shall meet the following basic conditions: (1) Abide by discipline and law, and abide by the professional ethics of testing and testing. (2) Being in good health and competent for testing. (3) Candidates who apply for the test inspector should have a high school education or above and more than 2 years of professional work experience, or have a college degree or above, or have junior professional and technical qualifications (technicians and senior engineers). (4) Candidates who apply for the test and testing engineer should obtain intermediate or equivalent engineering professional and technical qualifications, have more than 1 year experience in test and testing, and meet the following requirements of relevant professional qualification years: 1. The year of obtaining the doctor's degree; 2. Engaged in engineering professional and technical work for more than 3 years after obtaining a master's degree; 3. Obtained a double bachelor's degree or postgraduate degree, and engaged in engineering professional and technical work for more than 4 years; 4. After graduating from college, he has been engaged in engineering professional and technical work for more than 5 years; 5. Engaged in engineering professional and technical work for more than 7 years after graduating from university; 6. Obtained a bachelor's degree after work and engaged in engineering professional and technical work for more than 6 years; 7. Obtained a college degree after work and engaged in engineering professional and technical work for more than 8 years; 8. After graduating from technical secondary school in related major, he has been engaged in engineering professional and technical work 12 years or more. (five) with senior engineer or above professional and technical qualifications, engaged in test work for more than two years, the test engineer can be exempted from basic subjects; Those who have obtained the qualification of highway or waterway inspection engineer of the Ministry of Communications may be exempted from public basic subjects when adding items. Second, the registration time and method 2. Registration method: the exam is registered online. Candidates log in to the website of the central station of the Ministry, log in their application information truthfully and accurately according to the regulations, and print the registration form after confirmation. Candidates' registered names must be consistent with their ID cards, and the password set is the only evidence for candidates to enter, modify personal data, log in to the exam and inquire about exam results. Candidates must be properly kept, and if they are lost, they will not be admitted. Iv. Qualification examination of candidates 1, and qualification examination time: on-site examination of candidates' personal data. 2. Examination materials: After the printed application form is examined and sealed by the unit or the personnel file management department, the applicant will take 1 set of application form, ID card, professional title certificate, original diploma and all copies, and 4 recent two-inch standard ID photos (the unit, name and date of birth are written in italics on the back of the photos) to the designated place for on-site examination. 3. If the application materials pass the examination, it will be deemed that the registration is valid and the examination will be granted. Those who fail to meet the registration requirements after examination will be informed on the spot. Only those who log in online but fail to submit materials or fail the audit are invalid. After the review, the application materials shall not be modified. Pay the registration fee and exam when you receive the admission ticket on-site audit.
(2) Requirements for registration time of building materials testing laboratory personnel.
Application conditions: High school with technical secondary school education or above.
Details as shown in the figure:
(3) What are the application conditions for highway and waterway engineering test inspectors (be specific, thank you! ! ! )
Apply for qualification
Applicants (hereinafter referred to as "candidates") shall meet the following basic conditions:
(a) abide by the law, abide by the professional ethics of testing work.
(2) Being in good health and competent for testing.
(3) Candidates who apply for the Ombudsman should have a high school education or above and more than 2 years of professional work experience, or have a college degree or above, or have junior professional and technical qualifications (including technicians and senior engineers).
(4) Candidates applying for testing engineer should obtain intermediate or equivalent engineering professional and technical qualifications, have more than 65,438+0 years of testing and testing experience in the major they apply for, and meet the following requirements for relevant professional qualification years:
1. The year of obtaining the doctorate.
2. Engaged in engineering professional and technical work for more than 3 years after obtaining a master's degree.
3. After obtaining a double bachelor's degree or postgraduate degree, he has been engaged in engineering professional and technical work for more than 4 years.
4. Engaged in engineering professional and technical work for more than 5 years after graduation from university.
5. Engaged in engineering professional and technical work for more than 7 years after graduating from university.
6. Obtained a bachelor's degree after work and engaged in engineering professional and technical work for more than 6 years.
7. After work, obtain a college degree and have been engaged in engineering professional and technical work for more than 8 years.
8. After graduating from technical secondary school in related major, he has been engaged in engineering professional and technical work 12 years or more.
(except senior technician or above)
What are the registration requirements for inspectors? Are there any professional restrictions?
Accounting qualification certificate, teacher qualification certificate and logistics qualification certificate. , not limited to majors. Accounting certificate Accounting qualification certificate is an essential qualification for accountants to engage in accounting work, and it is the threshold for accountants to enter the accounting industry. Territorial management, common throughout the country. At present, China implements the examination system. Anyone with a high school education or above who applies for the accounting qualification certificate can sign up for the examination, and those who pass the examination can obtain the accounting qualification certificate. The registration examination is organized by the financial departments of all provinces, autonomous regions and municipalities directly under the central government. Registration method: Applicants should bring their ID card and three recent bareheaded one-inch photos, with negative film, and go through the registration formalities at the designated registration place. Examination subjects: financial regulations and professional ethics, accounting foundation, primary accounting computerization. Those who have passed all three exams within one year will receive the "Accounting Qualification Certificate" at the original registration point three months after the end of the exam; Those who pass the single subject will not be retained. Registration and examination time: the financial departments of all provinces, autonomous regions and municipalities directly under the Central Government are responsible for it, so it may vary from place to place.
⑤ What are the basic requirements for motor vehicle inspectors?
Provisions on the administration of motor vehicle safety technical inspection institutions
Qualification permit
Article 6 The establishment of security inspection institutions shall follow the principles of overall planning, rational layout and convenient inspection.
Article 7 The State practices qualification management and metrological certification management for security inspection institutions.
Security agencies shall, in accordance with the provisions of relevant national laws and regulations, obtain metrological certification and inspection qualification before undertaking motor vehicle safety technical inspection within the approved inspection scope.
The provincial quality and technical supervision department is responsible for the acceptance, examination, decision and issuance of the application for inspection qualification license of the security inspection institution within its administrative area.
Article 8 The metrological certification management of security inspection institutions shall be implemented in accordance with relevant metrological laws and regulations.
Article 9 The application for metrological certification and inspection qualification license of security inspection institutions and its acceptance, on-site examination and certification shall be handled at the same time.
Article 10 To apply for the inspection qualification license of a security inspection institution, the following basic conditions shall be met:
(1) Having the qualification of a legal person;
(2) Having technicians who meet the needs of motor vehicle safety and technical inspection and have passed the examination by the provincial quality and technical supervision department;
(3) Having a sound work management system and complete technical specification documents such as motor vehicle safety technical inspection standards;
(4) Having motor vehicle safety technical inspection equipment and calibration equipment required for applying for testing vehicle models and projects;
(5) Motor vehicle safety technical inspection equipment shall pass the legal and effective type appraisal, and the measuring instruments in use shall be verified or calibrated by the metrological technical institutions authorized by the quality and technical supervision department according to law, and within the validity period of verification or calibration;
(6) Having facilities, places and working environment that meet the requirements of motor vehicle safety and technical inspection;
(seven) other conditions that should be met.
Article 11 To apply for the inspection qualification license of a security inspection institution, the following application materials shall be submitted to the local provincial quality and technical supervision department:
(1) an application;
(2) Legal person certificate and its copy;
(three) the inspection certificate and a copy of the inspector;
(four) the certificate and copy of the verification or calibration of measuring instruments;
(five) the configuration details of the testing line and the list of testing and calibration equipment;
(six) the geographical location, site and factory floor plan, the corresponding ownership or legal use right certificate and copy;
(7) Other relevant legal documents.
(5) Examiner's examination conditions extended reading: code of conduct.
Seventeenth security agencies should follow the principles of independence, objectivity, impartiality and good faith to carry out motor vehicle safety technical inspection activities.
Eighteenth security agencies should keep the information system unobstructed, and provide the motor vehicle safety technical inspection information to the quality and technical supervision department in a timely manner.
Nineteenth security agencies should ensure that the equipment in use is normal and intact, and the measuring instruments in use are calibrated or verified according to law, and regularly participate in the comparison test of inspection ability according to the requirements of the quality and technical supervision department.
Twentieth security agencies should establish and improve various rules and regulations and motor vehicle safety technical inspection files, and keep the inspection results and related technical data in accordance with relevant state regulations. If there are confidentiality requirements, the confidentiality provisions shall be observed.
Twenty-first security agencies should strengthen the training and internal management of motor vehicle safety technical inspectors, and constantly improve the inspection service level.
Twenty-second safety institutions shall accept the supervision, inspection and management of the quality and technical supervision department, and submit the work report of the previous year to the local quality and technical supervision department before the end of each year.
Twenty-fifth security agencies shall not have the following acts:
(1) Altering, reselling, leasing or lending the inspection qualification certificate;
(two) beyond the approved scope of inspection for motor vehicle safety and technical inspection;
(three) failing to carry out motor vehicle safety inspection in accordance with national technical standards;
(4) Issuing false inspection results without inspection, such as issuing inspection reports;
(five) require the motor vehicle to the designated place for repair and maintenance;
(six) the use of personnel who have not been examined by the provincial quality and technical supervision department or who have failed the examination to engage in inspection work;
(seven) shirking or refusing to handle user complaints or objections without justifiable reasons;
(8) Other illegal acts.
6. What documents do I need to apply for highway engineering test inspectors?
Documents required for applying for highway engineering test inspector
1. ID card
2. Degree certificate
Conditions for taking the professional qualification examination for highway engineering assistant test inspector (meet one of the following conditions)
1. Have a high school education or above, and have been engaged in highway engineering test and detection for more than 4 years.
2. Obtain a college degree in engineering, science and management, and have been engaged in road engineering test for two years, or obtain a college degree in other disciplines and have been engaged in road engineering test for three years.
3. Obtain a bachelor's degree in engineering, science, management or other disciplines, and have been engaged in road engineering test for one year.
Conditions for taking the professional qualification examination for highway engineering test and inspection personnel (meeting one of the following conditions)
1. After obtaining junior high school or high school diploma and assistant inspector certificate of highway engineering, he has been engaged in highway engineering test for 6 years.
2. Get a college degree in engineering, science and management, and accumulate six years of experience in highway engineering inspection.
3. Obtained a bachelor's degree or degree in engineering, science and management, and engaged in road engineering test and detection work for four years.
4. Obtain a bachelor's degree in engineering, science and management or graduate from a postgraduate course in engineering, science and management, and have been engaged in road engineering test for two years.
5. Master of Engineering, Science and Management, engaged in road engineering test, * * * 1 year.
6. Get a doctorate in engineering, science and management.
7. Those who have obtained the above-mentioned academic qualifications or other disciplines or academic qualifications will have a corresponding increase in the working years of highway engineering test and detection 1 year.
(6) Examiners' examination conditions are extended to read.
Book for professional qualification examination of highway engineering test inspectors
1. Examination outline for highway engineering test inspectors
2. Examination Guidance Book for Highway Engineering Testers, Public Basis, Exercises and Problem Solving.
3. Highway Engineering Testers Examination Counseling Book "Highway" "Exercise and Problem Solving"
4. Examination Guidance Book for Highway Engineering Testers, Teaching Materials, Exercises and Problem Solving
5. The books "Bridges and Tunnels" and "Exercises and Solutions" for highway engineering test inspectors.
6. Examination guidance book for highway engineering test inspectors, mechanical and electrical, exercises and solutions.
⑦ Application conditions for assistant inspector.
First, the assistant inspection inspector examination registration conditions:
(a) to obtain secondary school or high school education, engaged in highway and waterway engineering test and testing professional work for 4 years;
(two) to obtain a college degree in engineering, science and management, and to engage in the professional work of highway and waterway engineering test and detection.
More than 2 years; Or obtain a college degree in other disciplines and have been engaged in the test and detection of highway and waterway engineering for 3 years;
(three) bachelor degree or above in engineering, science and management; Or take other subjects.
Bachelor degree, engaged in highway and waterway engineering test and detection for at least 1 year.
：
Examination examiner examination registration conditions:
(a) to obtain secondary school or high school education, to obtain the certificate of assistant test inspector of highway and waterway engineering, and to engage in the test and inspection of highway and waterway engineering.
Engaged in inspection and testing professional work for 6 years;
(two) to obtain a college degree in engineering, science and management, and to engage in the professional work of highway and waterway engineering test and detection.
More than 6 years;
(three) to obtain a bachelor's degree or degree in engineering, science and management, and to engage in the experimental work of highway and waterway engineering.
Engaged in testing professional work for 4 years;
(four) to obtain a double bachelor's degree or a double bachelor's degree in engineering, science and management.
After graduating from the postgraduate class, he has been engaged in the professional work of highway and waterway engineering test and detection for 2 years;
(five) to obtain a master's degree in engineering, science and management, and to engage in the professional work of highway and waterway engineering test and detection.
1 year or more;
(six) to obtain a doctorate in engineering, science and management;
(seven) personnel who have obtained the above-mentioned academic qualifications or other academic degrees and are engaged in the professional work of highway and waterway engineering test and detection.
Years increased by 1 year.
Questions about the final test;
Accumulated working years refer to the calculation from the first degree. Full-time junior college can be undergraduate, counting from graduation; Such as part-time education
Count from ….
What are the requirements for a qualified inspector?
To be a good inspector, you need to do the following four words well: precision, diligence, management and accuracy.
"Fine" refers to two aspects: professional and personal savvy. First of all, he is proficient in business and should be quite familiar with the products and parts in charge. The inspector of the previous process should know the position and function of parts and products in this process and the next process.
"Diligence" refers to both leg diligence and hand diligence. Leg attendance means that inspectors should go to the workshop site more often, and only when they go to the site can they find unqualified products and correct wrong process parameters and workers' random irregular operation behavior. Besides, we can communicate more and increase mutual understanding and support.
"Management" means that inspectors should manage the scope of their responsibilities. One is to manage people, which mainly refers to the education of quality consciousness. Improving the quality awareness of grass-roots employees is one of the keys to high-quality production and quality management. Combining management with inspection, only by improving employees' quality awareness, reducing employees' randomness, consciously producing products that meet the requirements, and then adopting scientific sampling inspection methods, can the qualified rate and the work efficiency of inspectors be improved; Second, it is necessary to control and resolutely stop the behaviors that do not conform to quality management, such as "crossing the sea" and unqualified suppliers during the inspection process.
"Positive" mainly refers to the quality requirements of inspectors themselves, which is the most basic requirement. The first three requirements are also based on this. If an inspector's own quality is not high, he will definitely not do well if he eats what he wants from suppliers or employees. On the one hand, he will lower or give up the requirements or standards in the inspection, accept unqualified products, and be lax in control; Second, it will lose fairness and implement different standards for different suppliers and employees, which will have an impact on both suppliers and employees. Therefore, an inspector should not only be upright and resolute in all kinds of temptations, but also establish his own prestige, which will bring great convenience to his work.
Qualifications of qualified inspectors:
1 Seriously implement the quality inspection standards (regulations), strictly enforce the law, make a correct judgment, be impartial, and be responsible for the correctness of the inspection results.
2. Complete the inspection task on time to prevent missed inspection, less inspection and wrong inspection, and ensure the smooth production.
3. Fill in the quality inspection records carefully, so that the figures are accurate, the handwriting is clear and the conclusion is clear, and the inspection records are classified and filed.
4. Implement the provisions of inspection status identification to prevent materials and products in different states from being confused. Check and supervise the implementation of status identification in production process and correct nonconformities.
Responsible for the statistics and analysis of incoming materials, processes and finished products quality, and put forward suggestions and suggestions for improvement.
6 do a good job of the first inspection, strengthen the inspection, especially the inspection of quality control points, and correct the problems in time when found. Have the right to stop and criticize the act of mixing unqualified products into the next working procedure.
Major quality problems are found and reported to the production, technology and quality departments immediately, so as to take timely measures to reduce losses.
Have the right to stop the delivery and use of nonconforming products.
Have the right to dispose of individual and general nonconforming products.
10 Take part in training and study seriously, and strive to improve their comprehensive quality.
Pet-name ruby highway inspector certificate need what conditions?
Introduction to the application conditions for highway inspectors:
Applicants (hereinafter referred to as "candidates") shall meet the following basic conditions:
(a) abide by the law, abide by the professional ethics of testing work.
(2) Being in good health and competent for testing.
(3) Candidates who apply for the Ombudsman should have a high school or technical secondary school education and have more than 2 years of engineering and technical work experience in the major they apply for, or have a college degree or above;
(4) Candidates applying for testing engineer should meet the following requirements of engineering professional education, and have the engineering and technical work experience of the applied major:
1. The year of obtaining the doctorate.
2. After obtaining a master's degree, he has been engaged in engineering and technical work for 2 years.
3. Engaged in engineering and technical work for 5 years after graduation from university.
4. After graduating from university, I worked in engineering and technology for 7 years.
5. Obtained a bachelor's degree after work and engaged in engineering and technical work for 6 years.
6. After work, I have obtained a college degree and engaged in engineering and technical work for 8 years.
7. Engaged in engineering and technical work after graduating from technical secondary school 12 years.
(five) those who have been engaged in testing for more than two years and have senior titles may be exempted from the basic subjects.