1. There is no "best material" for decoration, only the right one is the best.
2. If you live in an ordinary home, latex paint or wallpaper is widely used on the wall (the image wall needs special treatment).
3. If it is a commercial space, the wall materials are varied according to different places. Aluminum-plastic board/fireproof board/art glass/sound-absorbing board/metal plate/decorative board * * * *
What materials should be used for wall decoration?
People spend more than two-thirds of their life in the living room, and the wall area of the living room is usually three times that of the ground. Therefore, the unqualified wall directly affects the health of you and your family. The first is a set of pictures:
Many consumers like wallpaper. After short-term use:
Latex paint used by most families, after one and a half years:
Some families will use wall tiles or marble, but when it comes to wet weather, it will ..........................................................................................................................................................
The above are the most used decoration materials for ordinary home improvement at present. Think about it, should such a wall, which is neither environmentally friendly, beautiful nor practical, be built? Qualified walls should have the following characteristics:
1, green and healthy, clean and environmentally friendly.
2. Moisture and alkali resistance.
3, anti-pollution, easy to clean. 4, wear-resistant and washable.
5, mildew and antibacterial.
6, integrity and elastic tension are good, and the feel is delicate.
7, long service life, lasting forever.
Seeing the above inspection standards of qualified walls, I think you should know what are the shortcomings of your own walls!
Love the whole house texture wall film, with all the above attributes, but also can be customized privately, showing a unique wall effect to meet all your requirements for the wall.
What is the best material to decorate the wall now?
Latex paint is too smelly and seriously polluted. Can people still live in the room after completion?
Wallpaper is too expensive, and its service life is only five years. If it is damaged, it can't be repaired. The wallpaper glue used is also polluted by chemicals.
It is recommended to use algal diatom mud! The product is novel, the raw materials are environmentally friendly, and it can also absorb formaldehyde from other furniture in the house. Sign a contract with customers to ensure that the indoor formaldehyde content is within the scope of national safety standards. Formaldehyde can be measured at any time. Prices range from tens of yuan to one or two hundred yuan, and there is a lot of choice.
The last few renderings, I hope to adopt! ~~~
What material is reasonable, durable and economical for wall decoration?
First, latex paint
1. Generally, the wall of a new house only needs to be polished with coarse sandpaper, and the original paint layer does not need to be removed.
2. The walls of ordinary old houses generally need to remove the original paint. The method is to spray the surface with water first, and then remove the paint from the surface with a trowel or plane.
3. For the old wall that has been in disrepair for a long time, there has been a serious phenomenon of paint peeling on the surface, and the scalded layers are powdery and sandy. Remove the paint layer and the whole batch of scalded layer until the cement batch is scalded or the brick layer is seen.
4. Then mix with Shuangfei powder and cooked rubber powder, and then apply latex paint. The surface layer needs to be coated 2 ~ 3 times, and the interval between each time is preferably 24 hours.
Second, spraying
Spraying is a brushing method of water-soluble coatings. Using the characteristics of oil in water, the pressurized color spray gun is used for construction. Can form a variety of color textures, elegant and three-dimensional.
Third, wallpaper
The decoration is quite ordinary. There are mainly paper wallpaper, chemical fiber wallpaper and plastic wallpaper. Cloth wallpaper is generally called wall covering and does not belong to wallpaper.
Wallpaper can be printed with patterns, with diverse patterns, rich colors and convenient construction.
In the construction of wallpaper, the most important key technologies are mildew prevention and flexibility treatment:
Moldproof treatment. Before pasting wallpaper, the base surface needs to be treated well, and it can be ironed with Shuangfei powder and cooked rubber powder in batches. When it dries, brush the varnish once or twice, and then stick it on.
Fourth, tiles
Ceramic tile is a major project in decoration at present. Please refer to other chapters of ceramic tile for specific varieties. Ceramic tiles are mostly used for walls in kitchens, bathrooms, balconies and other places. The biggest benefit of tile decoration may be dirt resistance.
One of the main problems in tile decoration is the treatment of waterproof layer. Because most places like kitchens and bathrooms have water problems. So pay more attention to the waterproof of the wall.
What is the best and most practical wall decoration material?
Now it is convenient and quick to integrate the wall. We have a Tuscan integrated wall here, and the effect is good. You can refer to it
What material is better for decorating the walls of the bedroom?
You can decorate with whatever materials you want, and the state does not stipulate what materials must be used for decoration. As long as you are happy.
What material should I use to make a set of partitions on the wall?
There are ready-made partitions.
Various colors
Can be equipped with hidden expansion bolts and expansion rods.
And then you can't tell
If your circuit board is long, consider using more expansion bolts.
The longest line of sight is 72 yuan (1.8M wide) and 93 yuan (20cm wide).
Multiple circuit boards can be connected.
Have a good understanding of what materials are used for wall decoration and what materials are used for wall decoration.
Haoerbao air depuration coating material
Haoerbao air purification coating can control formaldehyde, release negative oxygen ions, purify the air, do not fade and resist aging, adjust humidity, sound insulation and noise reduction, antistatic, moisture-proof and mildew-proof, soft and non-reflective, flame retardant, customized!
Haoerbao air purification coating is an inorganic functional coating, which belongs to inorganic materials and can resist mildew! Metal nanorods can sterilize!
Haoerbao air purification coating is moisture-proof and mildew-proof, and the wall surface does not lose powder, peel and peel when soaked in water. The wall is completely dry, consistent with the new wall, and the top of the bathroom and the dry area can be used. The material is pure inorganic, like cement and soil, it will never get moldy when wet. This wall is easy to clean. Inorganic walls have no static electricity and do not stick to dust. If the wall is dirty, you can try it with an eraser and gently scrub it with water.
Haoerbao air purification coating is composed of fumed silica, inorganic minerals and other basic materials, asymmetric electrodes and efficient catalysts. Its surface structure and internal structure are porous, which can purify air pollutants such as formaldehyde. Haoerbao air purification coating contains permanent polar substances and efficient catalysts: when the permanent polar substances contact with water, they can generate micro-current to electrolyze water, thus generating hydrogen ions and hydroxide ions. The generated hydrogen ions are neutralized by electrons to generate hydrogen, and the generated hydroxide ions react with water to generate negative oxygen ions. Tested by the national authoritative department, it reaches 1200 negative oxygen ions/cm2/sec.
What material is good for decorating the walls of the house?
1, latex paint and latex interior wall coating belong to high-grade coatings, although the price is more expensive. However, due to its excellent performance and decorative effect, it has occupied an increasing market share. A good latex coating has good water resistance, alkali resistance and scrubbing resistance, and the coating will never peel off after being wetted. Generally speaking (under the same conditions of pigment, volume and concentration), styrene-acrylic latex paint has better water resistance, alkali resistance and scrub resistance than ethylene-propylene latex paint, and ethylene-propylene latex paint is better than polyvinyl acetate latex paint (commonly known as latex paint).
2. Colorful paint, which is popular in the market. The film-forming substance of the coating is nitrocellulose, which is dispersed in the water phase in the form of oil in water, and a variety of color patterns can be formed by one-time spraying.
3. Water-soluble coatings are made by dissolving polyvinyl alcohol in water and then adding other additives such as pigments, which belong to low-grade products. This kind of paint has many defects such as water resistance and alkali resistance, and it is easy to peel off after being wetted. It belongs to low-grade interior wall decorative coatings product and is mainly used for interior wall decoration. Water-soluble coatings are cheap, non-toxic and tasteless, easy to construct, accounting for about 50% of the market, and are mostly used for interior wall decoration of middle and low-grade rooms or temporary rooms.
The above explanation is how to check and accept the wall decoration. What material is good for decorating the wall? If the wall decoration fails, it will bring a lot of trouble to the later living process of the house, because the wall decoration can often be completed once, and if it is demolished for the second time, it will be relatively troublesome. Therefore, we should have some professional knowledge about the wall decoration, which is more convenient for us to accept and is also a guarantee for our own safety performance.
What is the best material for the partition wall?
Aluminum alloy partition: aluminum alloy frame wrapped with tempered glass (double-layer tempered glass with blank pages, 8. 10. 12mm smooth glass stainless steel partition: stainless steel frame wrapped with tempered glass (only single-layer tempered glass of 8. 10. 12mm) light steel keel partition: gypsum board partition (with keel inside) Stainless steel partition is relatively simple, but the cost performance is ok, cheaper than aluminum alloy. Gypsum board partition is not recyclable, the oldest partition style, but it does not deny its importance.