Energy saving mode: the computer board automatically sets a code. When turned on, the air conditioner will automatically set a temperature (for example, 25 degrees). When the indoor temperature is higher than 25 degrees, the wind speed will automatically adjust to high-speed operation, and when the temperature reaches the set temperature, it will become low-speed operation.
Sleep mode: When a person goes to sleep, the heat output of the human body will be reduced. After choosing the sleep mode, the temperature will be adjusted according to the time period to avoid waking up in the middle of the night. Sleep mode is usually 8 hours. Heating in winter, the air conditioner drops 2 degrees in one hour, 3 degrees in another hour, and then works at constant temperature.
Advantages of health and energy saving mode:
1, healthy mode stabilizes the indoor temperature, which is higher than the set temperature, and there will be no ups and downs.
2. Health mode and outdoor air exchange are more frequent. Ensure indoor air quality.
3. Healthy and energy-saving mode The compressor is easy to stop, and it automatically rises by one degree Celsius every two hours, saving electricity.
4. The health and energy-saving mode will also automatically adjust the wind speed to the minimum at the same time, so as to avoid people catching a cold due to large air volume, and at the same time, the internal machine noise will be minimal.
Extended data:
Methods to improve the energy efficiency of air conditioning;
1, pay attention to adjust the room temperature. When cooling, the temperature is 1℃ higher than usual, and when heating, the temperature is 2℃ lower than usual, which can save electricity, but the human body can hardly notice the difference.
2. Choose a suitable air outlet angle. When cooling, the air outlet is upward; When heating, the air outlet is downward.
3. After the air conditioner is turned on, when the temperature is appropriate, it will be changed to medium-low wind to reduce energy consumption and noise.
4. The connecting pipe between the outdoor unit and the indoor unit of split air conditioner should be as short as possible, and the outdoor unit should be covered with a sunshade to save electricity.
5, can't start the compressor frequently, after downtime must be every two or three minutes to boot, otherwise it is easy to cause the compressor overload and burn.
6. Use a thicker curtain cloth. In addition to the necessary ventilation, open doors and windows as little as possible, which can reduce indoor and outdoor heat exchange and help save electricity.
Xinhuanet-How to use air conditioning to save energy?
Baidu encyclopedia-air conditioning sleep mode