How to use the mobile phone battery to be durable?

People who use mobile phones all have the same heart disease-batteries. When I was on the phone, I suddenly ran out of power or went out to find that the battery was not enough, which was very annoying and helpless. Therefore, people often lament that the battery technology is not advanced enough, and even suspect that JS has tampered with the battery when encountering such a thing. Although this is sometimes the case, there are actually many troubles caused by people's improper use. The following article introduces many aspects of the use of mobile phone batteries. You might as well check it. Did you do the right thing? 1. What should I pay attention to when charging the mobile phone battery? 1. Please use the charger of the original factory or reputable brand, and use the special charger for lithium battery, and follow the instructions, otherwise the battery will be damaged or even dangerous. 2. The time should not exceed 24 hours. 3. Try to use slow charging when charging, and avoid using fast charging. If the battery is newly bought or not used for a long time, it should be sufficient before use. 5. After three or five complete charge and discharge cycles, all the chemicals in the battery will be activated to achieve the best use effect. 6. Before charging, Ni-MH batteries and lithium batteries do not need special discharge. Improper discharge will damage the battery. 7. Mobile phone batteries have self-discharge. When not in use, the Ni-MH battery will discharge with the remaining 1% every day. Lithium batteries discharge 0.2%-0.3% every day. 2. How to distinguish the authenticity of a mobile phone battery? At present, the market is full of fake and shoddy mobile phone batteries, which harms the interests of many consumers. In order to facilitate consumers to identify the authenticity, the identification method is provided for reference only. Authentic mobile phone batteries generally have the following appearance characteristics: * The battery label adopts secondary printing technology. In a certain light, when viewed from the inclined plane, the color of the bar code part is obviously darker than other parts, and it feels slightly raised by hand, which is the characteristic of Motorola's original battery. * The white place on the surface of the battery label is lightly scratched with a metal object, which is similar to the trace of a pencil. * The battery case is made of special material, which is very strong and not easy to be damaged. * The appearance of the battery is clean and tidy, without unnecessary burrs, the outer surface has certain roughness and comfortable feel, the inner surface feels smooth, and tiny longitudinal scratches can be seen under the light. * The width of the battery electrode is the same as that of the cell of the mobile phone, and the corresponding positions below the battery electrode are marked with "+"and "-". The isolation material between the battery charging electrode plates is the same as the shell, but it is not integrated. * The battery is installed in the mobile phone, so you should feel comfortable and comfortable. * The battery locking pressing part is locked correctly and firmly. * The battery label is legible and has the battery number corresponding to the battery type. * The manufacturer on the battery should have a clear outline, and the anti-counterfeiting logo has good brightness and looks stereoscopic. * The edge of the font on the battery label has "sawtooth wave" burr, which is especially suitable for the identification of Ericsson series batteries. It is said that the charging of travel charger is very harmful to the battery of mobile phone. Is that so? Yes, travel charging is a kind of fast charging, but at present the voltage in many cities in China is unstable, especially at night. At present, it is best to use fast charging as a temporary or emergency charging method and seat charging as the main charging method. Generally speaking, how long is the service life of mobile phone batteries? The service life of mobile phone battery is related to the battery type and charging times. If you use Ni-MH battery, you must buy a new battery after charging for about 500 times. Ni-Cd battery can be charged 1500 times and lithium battery can be charged for 300-500 times. 5. Half of the lithium battery of mobile phone is used. Can it be recharged? Will it reduce the battery life? Lithium battery itself has no memory effect and can be charged on demand, but the life of the battery is inversely proportional to the number of times of charging and discharging, so it is recommended that the battery should be used up before charging. 6. What should I pay attention to when charging a newly bought mobile phone? And what if the battery is not used for a long time? What should I pay attention to when I take it out? In general, the battery should be used correctly. It takes about 14 hours for the new battery to be fully activated in the first three times. After charging, the battery can be charged for one hour after it is fully charged. Be careful not to charge the battery for more than 24 hours. If you don't use the battery for a long time, it is recommended to use it before storing it. 7. What should I pay attention to when using mobile phone batteries? 1. In order to optimize the performance of the mobile phone battery, it is recommended that the new battery be charged at least 12- 14 hours before 2-3 times. 2. Depending on the type and capacity of the battery, the charging time of the battery is about 1.5-6 hours, not more than 24 hours. 3. The life of the battery depends on the number of repeated charge and discharge, so try to avoid charging the battery when the power is left, which will shorten the life of the battery. 4. When the mobile phone is turned off for more than 7 days, the battery of the mobile phone should be completely discharged before use. 5. Nickel-cadmium battery must be completely dead before charging and fully charged after charging. In addition, from the perspective of environmental protection, scrapped mobile phone batteries should be recycled and not thrown around at will. In foreign countries, the recycling of mobile phone batteries must comply with the recycling plan made between the government and battery manufacturers. In China, there is no mobile phone battery recycling system. In China, millions of mobile phone batteries are discarded every year. If it is not recycled in time, it will cause long-term harm to the environment. 8. Is the original battery superior to the brand battery? The original battery is not necessarily superior to the brand battery, because the original battery is also produced by the configuration manufacturer. If the brand battery is of good quality, it may be better than the original battery. 9. When a part of the battery is used up, it will be full when it is turned off and turned on again. But after using it, it's all that's left before turning it off? It's normal, because every time the battery is reused, the battery voltage will rise, which will lead to an error in the battery power displayed by the mobile phone, but it will return to normal after a while. 10. Is there a difference in standby time and battery life between Ni-MH battery and lithium battery? If it's just the weight difference, what does it mean that hydrogen batteries are troublesome to use? Is it necessary to consider the problems of hydrogen battery and lithium battery when purchasing a machine? The main difference between lithium battery and Ni-MH battery is that the former has longer life and lighter weight than the latter. It can be used at any time and charged at any time. Same volume: Lithium battery has larger capacity and lighter weight than Ni-MH battery. The trouble with using Ni-MH battery means that lithium battery can be charged as it is when used, and there is no memory effect, but it is recommended to use any battery before charging. What are the main types of mobile phone chargers and how to choose them? At present, mobile phone chargers mainly include travel chargers and seat chargers. Travel charger is suitable for people who travel frequently because it is easy to carry. Generally, it is a fast charging method with a charging time of 2-3 hours. Seat chargers are generally designed to be dual-slot, so users can charge another battery in addition to the battery being used on their mobile phones. So the charger can charge two batteries at a time. The charging time of the seat charger is 2-3 hours longer than that of the travel charger, about 4-5 hours. In addition to the above two kinds of chargers, there is also a car charger, which is convenient for users to charge their mobile phones in the car. One end of the car charger is plugged into the cigarette lighter and the other end is connected to the mobile phone, but it is not suitable for charging in the car for a long time because of the high temperature in the car. Travel charger and seat charger have the same effect on battery charging. The travel charger will not have any adverse effects on the mobile phone, but the user must confirm that it is the original charger when purchasing, otherwise the battery will not be fully charged because of the poor charging effect of the charger. In addition, the original travel chargers and seat chargers produced by manufacturers now use protection circuits or switch circuits to protect the charging of batteries, while fake and shoddy chargers have no protection circuits, which are shoddy and easy to charge batteries and even burn mobile phones. Therefore, in the current standard configuration of most mobile phones, there is only a travel charger. I suggest that you be cautious when purchasing seat chargers and avoid buying parallel seat chargers. 12. What are the factors that determine the standby time and talk time of mobile phones? Standby time and continuous talk time mainly depend on the following four factors: 1, cell phone battery capacity; 2.SIM card; 3, mobile phone function selection and setting; 4. Network quality and network structure. It is generally believed that for the same mobile phone, under the same normal working conditions, the larger the battery capacity, the longer the standby time and continuous call time, but it is not linearly proportional; At the same time, if the battery with the same capacity distributes power, the fewer functions of the mobile phone, the higher the network quality, the smaller the current of the mobile phone and the longer the battery life. In addition, the power consumption of built-in components of various mobile phones is also different (for example, Nokia mobile phones consume less power, Samsung mobile phones and Ericsson mobile phones consume more power), which will lead to differences in standby time and continuous call time. Thirteen. How to charge the new Ni-MH battery? What should I pay attention to? It is recommended to charge the Ni-MH battery. It is best to use up the battery before charging. It shows that it can be charged for about one hour after charging is completed.