First, how to install solar street lamps
1. Install the solar panel first, put the panel on the panel bracket and fix it with screws. 2. After the solar panel is installed, led lights can be installed, and the lights can be directly aligned and connected together. You can lift the lamp post. Check whether the parts are fixed before lifting, then slowly lift the lamps with lifting ropes, keep them flat after lifting, and then fix the lamp poles with screws. 4. It is best to install the battery and put it in the battery slot.
Second, the use of led lights matters needing attention
1. When installing led lights, protective measures should be taken. After all, a lot of static electricity may be generated during installation. If it is not handled properly, it is likely to cause unnecessary trouble. Therefore, as a construction worker, it is necessary to wear gloves and antistatic clothes to reduce the risk of accidents.
2. In the process of using the led lamp, if there are adverse reactions, such as increased leakage current and unstable static direct voltage, these are all caused by electrostatic adverse reactions, so once this happens, it needs to be repaired in time to avoid unnecessary troubles.
3. When the indoor current is too large, it is easy to dim the brightness of led lights, and in severe cases, it will directly burn out the current. In addition, when the led lamp is installed, it needs series resistance, which plays a good role in current limiting and ensures the normal use in the later period.
Bian Xiao: I introduced how to install solar street lamps here. I hope it will help everyone after reading it.