Tools: white latex, 4 CDs.
Output: 1. Glue a CD vertically to a quarter of another CD with white latex, as long as it is between the edge of the CD and the middle hole. 2. Paste it into a square like this.
Extension: If you want the bottom, you can stick a fifth disk under the box.
Usage: The pen can be inserted from anywhere.
This box is used as a CD rack.
Tools: white latex, box [as long as it is bigger than CD].
Output: 1. Subtract the side length of each box [wider than the CD]. 2. Stick them together with white latex.
Extension: 1. It can form a square or other shapes. 2. If it is too small, it will not be enough to support the CD. You can flatten the box, cut it to the size of the side of the model, and stick it on it to increase the side gravity. 3. You can also wrap a piece of Bao Shu paper outside to enhance the aesthetic feeling.
Usage: Just put it into the CD.
Roll paper core as pen container
Tools: white latex, scissors, 1 paper core, cardboard (hardness ≥ 0. 1cm).
Output: 1. Cut a piece of cardboard larger than the paper core with scissors. 2. Stick the paper core to the cardboard with white latex.
Extension: 1. A plurality of paper cores with different heights can be bonded to the cardboard side by side. 2. The paper core can be glued horizontally. 3. The paper core with single-sided glue can be stuck on the paper core placed horizontally. However, a piece of cardboard should be stuck under the single-sided rubber core. Comments (1).