Sannuo healthy Dian

It is impossible to get a floor of 1, even if you don't need a monitor. If you want E5300, you must support the goods of VT, otherwise it will be a waste to buy it. It is better to use E5200(5-capacitor version) of overclocking 3 Red Sea (60 yuan). In fact, I personally don't recommend using INTEL, because if it is not overclocked, AMD7750+780 motherboard and 4830 CF will have ideal effect. Look at your configuration. Everything is fine. There are just too many tricks. As far as your graphics card is concerned, the 9600GSO of 380 can't be 5 12 memory. JS is a miniature version with 256 video memory, so your graphics card will be eliminated soon. If you want to use INTEL's configuration, I suggest you use Onda 9600GSO 384M, and the asking price is 480. If you take AMD, I personally suggest that you use Sapphire 4830. Although the asking price is 600, it is worth it. (3A combination ~ In addition, 4830 can be soft-converted into 4850, which seems to be very valuable) Don't use expensive monitors if the requirements are not high. The recommended LG 1942SP is not expensive, but it is very good. 19 inch wide, low midpoint rate and good reputation. You must stick to Seagate single disk 12 generation 500G hard disk, and nothing else.

Give a configuration for your reference. This is my own configuration, but it's actually just a suggestion under my blueprint.

CPU:E5200 (5 capacitors, not boxed, only in bulk) 420 If you must have E5300, be sure to ask if you support VT technology.

Fan: Overclocking 3 Red Sea 60

Motherboard: Zappo X-BLUE P43 380

Memory: KINGMAX DDR2 800 (the previous price is not suitable now). The memory is not oily, and the price is similar to that of online newspaper. I'll calculate it as 140.

Graphics card: Onda 9600GSO 384M 475

Hard disk: Seagate 12 generation single disk 500G (I didn't use Seagate, mine was 640KS 4 15), estimated at 360 degrees.

Speaker: rambler R 10 1T06 (recommended, with good reputation). I remember the reserve price seems to be 130 degrees.

Power supply: Hangjia Cold Drill 2.3 185

Chassis: 100 (optional)

Monitor: LG 1942SP I heard that it is now 799, but it is estimated that it can be cut by dozens of degrees.

If LZ matches the machine at my price, it will basically not be cheated, because I have cut it perfectly. It is estimated that those js are not willing to trade at this price. LZ should be careful not to be replaced.

This is a cost-effective configuration that absolutely meets all your requirements. Running 3DMARK06 can pass 10300, and overclocking is better. 420+60+380+140+475+360+185+100+799 = 3049. Are you satisfied ~ ~

Look at the price on the monitor, which is similar to your budget. I have made great efforts to help LZ, and I really have nothing to say if I am not satisfied. Adopt me ~