1, dust removal: silica gel can be thoroughly cleaned with clean water, and can also be used with neutral laundry detergent and hand sanitizer;
2. Alcohol can be used to remove surface oil stains;
3. Silicone sticks to clothes. Removal method: soak the contaminated part of clothes in warm water. After the glue instantly softens, wipe it off by hand.
4. The chemical solvent xylene softens and dissolves the silica gel, and then wipes it off with a rag!
5. Use special cleaning agent for silica gel and follow the operation instructions.
Use of silica gel cleaning agent
(How to use CL-T03 silicone cleaner is as follows)
1. Material taking: wear protective gloves and masks, and unscrew the bottle cap slowly when opening it, so that the adhesive gas can overflow slowly and avoid splashing on the body.
2. Dipping: Soak the parts to be cleaned in this product and let it stand for more than 15 minutes to soften the silica gel or polymer;
3. Degumming: cleaning the softened silica gel or polymer with a fixture to make the metal surface basically exposed;
4. Cleaning: After removing the glue, you can immediately clean the surface of the product with this product or conventional solvents and dry it naturally.
Extended data:
Precautions for silicone cleaner
1, CL-T03 silica gel cleaning agent is composed of various surfactants and organic penetrant, which is volatile and must be stored in a cool and dry place in a sealed way.
2. Used and unused products are recommended to be stored separately, which can prolong the shelf life.
3. If it spills on clothes or eyes, rinse with plenty of tap water 15-20 minutes. If you feel sick, please send a doctor.
4. In any case, don't add water to the degumming system, because it will hinder the performance of degumming agent, cause chemical reaction and affect the effect. At the same time, CL-T03 silica gel cleaning agent cannot be mixed with other cleaning agents.
5.CL-T03 silica gel cleaning agent also has the ability to dissolve ABS engineering plastics. Before use, please confirm that there is no ABS plastic in the workpiece, or ABS plastic can be dissolved without loss.