If your computer can't boot after reinstalling the system, the system installation failed. At this time, we need to make a USB flash drive startup tool to solve the problem by reloading the system software with one button.
If your computer doesn't have an optical drive or a system CD, you can try to make a USB flash drive startup tool to repair and boot.
Reason: The common reason may be that the bios has set a USB flash drive, and the hard disk cannot be automatically identified after startup; System installation error or missing master boot. Solution: Check whether bios setup startup is hard disk startup; Enter the PE repair master boot.
It takes a long time to reinstall the system. It is not stuck in the interface of installing the system, but in the process of running the system. You are not only white, but also impatient. When installing the system, you can't give up halfway, otherwise there will be big problems. Now there may be something wrong with the motherboard system, so it needs to be repaired outside.
After you download the system resources, you need to restart the computer for installation, but many users have expressed the situation after the restart. Let's talk about the solution through this article.
Xiaobai's study box can't be opened.
1, Xiaobai learning box flashes red, which proves that there is a connection problem and needs to be reconfigured before it can be used. You can directly select an image printer with network function.
2. The data cable and data cable interface may be damaged. When the small white learning box is green but not connected, it may be that the data cable and the data cable interface are damaged, or the data interface is not connected in place. You can try changing a data cable or an interface.
3. normal. Connect the printer and the small white box to the power supply for power supply. Scan the QR code on the back of the box, pay attention to the small white box applet, click on the learning box and log in. First click on my page to add equipment, click on the small white learning box, and hold down the box net key for 5 seconds.
4. If the small white study box doesn't light up all the time, it may be that the internal circuit is damaged. Considering the problem of open circuit, you can find a professional to open it for inspection.
5. The little white learning stick is always bright yellow. You can reset the box before connecting: When connecting the printer, when the box indicator light is red, press and hold the network allocation key on the box for about 5 seconds until the light turns yellow and flashes.
Xiaobai U disk reinstallation system cannot open Xiaobai pe installation tool after entering Xiaobai pe system.
1. Reason: The bios is set with a USB flash drive, so it may be common that the hard disk cannot be automatically recognized after booting; System installation error or missing master boot. Solution: Check whether bios setup startup is hard disk startup; Enter the PE repair master boot.
2. Reason: The system is damaged or the file is lost, and the PE system is not done well. I suggest you try this: recreate the U disk PE of Xiaobai one-button reloading system; Re-enter the PE installation system and manually partition, repair and boot after installation.
It takes a long time to reinstall the system. It's not that the system is stuck in the installation interface, but that you are not only a white boy, but also an impatient person during the system operation. When installing the system, you can't give up halfway, otherwise there will be big problems. Now there may be something wrong with the motherboard system, so it needs to be repaired outside.
4. Cause of the problem: From the picture you gave, your computer can't start normally because of the lack of bcd boot. Solution: You can fix the bcd boot to solve the problem. Specifically, it is to make a small white U disk, and after entering the U disk PE, use the boot repair tool on the desktop to repair it.
5. Can I reload into winpe with one button? If you can get into winpe, find a disk partition software called DiskGenius or other names, and press Enter.
6. If your computer can't boot after reinstalling the system, the system installation failed. At this time, we need to make a USB flash drive startup tool and reinstall the system software with the small white key to solve the problem.
Why can't I open it when Xiaobai Zhuishu is installed? I use Redmi note8pro mobile phone.
Maybe the software installation package is incomplete. Redmi note8pro's browser gives you some wrong advice on parsing packages. This situation may be that the downloaded software installation package is incomplete, so it is recommended that you download and install it again when the network is stable. Check whether the phone has enough memory. Check whether other software can be installed normally.
The "install unknown application" in the mobile phone can't be opened, so you can try to open it again. Opening mode: Settings-More Settings-System Security-Special Application Permission-Install Unknown Applications-Select the application to be installed to open.
Sanqing is to format the mobile phone, which can solve most system problems, software flash back and other anomalies. Sanqing is also used to clear the system data before updating the system to ensure that the machine can be refreshed normally.