The plate did not reach the normal working state of the probability of increasing the generator coupling did not reach the normal working state of the probability of increasing the probability of exposure is not synchronized with the probability of increasing the probability of equipment accumulation of dust.
Shutdown for more than 7 days, the plate needs to be continuously powered up for more than 4 hours to enter the working state, and the probability of needing to train the bulb tube is increased, the plate has not reached the normal working state, and the quality of the image has not reached the optimal level.
Shutdown for more than 30 days need to check the whole machine before starting the use of power supply environment needs to be trained on the balloon tube operation plate needs to be continuously powered on for more than 4 hours, and may need to be calibrated according to the actual use of the generator needs to be calibrated using the environmental issues on the impact of the equipment.
Environmental temperature problems the use of the equipment room temperature below 10 ° leads to abnormal or damage to the plate between the equipment downtime temperature below 5 ° leads to irreversible damage to the plate room humidity is too large or water leads to a sharp reduction in the life of the plate room too much dust leads to a sharp reduction in the life of the whole machine.
Electricity environment problems input voltage is too high or too low leading to abnormal operation of the machine grid input voltage instability fluctuations caused by the machine board overload DR equipment ground failure, poor grounding leading to equipment failure or personnel injury hospitals frequent power outages leading to equipment can not reach the work of the steady state.