Jianghan University College of Arts and Sciences, the predecessor of Jianghan University Rongzhi College of Commerce and Industry, in order to seize the historical opportunity of the country's pilot independent colleges, in the case of a short period of time for the preparation of the establishment of inexperienced, and after several efforts, approved by the Hubei Provincial Department of Education to set up the college, the college from then on began to start the beginning of the beginning.
September 2002, the first batch of 202 new students reported;
November 2003, Hubei Sancai Education Investment and Consulting Company Limited took over the cooperation, the college was renamed as Jianghan University College of Arts and Sciences;
February 2005, a new campus was built in the northern part of Jianghan University, and more than 2,000 teachers and students were moved to the new site; July 2007, the first batch of 735 graduates graduated;
September 2008, the number of students exceeded 10,000; in 2011, the number of graduates exceeded 10,000;
May 2012, through the assessment of the right to confer bachelor's degrees; the college now has more than 12,000 students and nearly 400 faculty and staff members;
March 25, 2014, the UK's Coventry University Business School visited our college for cooperation and exchange;
On May 24, 2014, the leaders of St. Vincent's College in the United States visited our college;
On May 12, 2014, our college formally joined UOOC (UOOC) alliance to help promote the reform of curriculum and teaching;
On September 2014, the construction project of our college's new campus has been approved by the Provincial Development and Reform Commission;
2015 In October, the leaders of the French Higher Institute of Science, Technology and Economy and Business visited our institute;
In October 2015, Chen Shigang, vice mayor of Huangpi District, and his party investigated the construction of the new campus of our institute on the spot;
October 28, 2015, the foundation stone-laying ceremony was held for the relocation project of the new campus of Wuhu of the College of Arts and Sciences of Jianghan University, which had a total investment of 800 million yuan;
March 2016 17, our college signed an academic cooperation agreement with the French Higher Institute of Science, Technology and Economics and Business. The college has strong faculty, the existing full-time teachers: 416 people, including 39 people with the title of senior, 142 people with the title of associate, 150 people with the title of intermediate, 70 people with the title of junior, the proportion of personnel with the title of professor and associate professor in the teaching staff accounted for more than 30%.
Department of Commerce (now split into Department of Economics and Department of Management): 32 full-time faculty members, including 2 professors, 5 associate professors, 8 lecturers, 12 special professors, and 38 associate professors.
Department of Foreign Languages: 33 teachers, more than 80 professors and associate professors from JHU and other institutions.
Department of Physical Education and Aesthetics: 9 faculty members, including 1 professor, 1 associate professor, 3 lecturers and 4 assistant professors.
Department of Humanities: 13 full-time faculty members, 6 special professors, 12 associate professors, and 23 lecturers.
Department of Basic Courses: 13 full-time faculty members, including 3 with full senior titles, 4 with associate senior titles, and 6 with intermediate titles; 10 of the 13 have postgraduate degrees. Part-time teachers are mainly teachers with associate senior title or above in related majors of Jianghan University and well-known scholars from other universities and colleges, gatekeeper teachers.
Department of Information Technology: 23 teachers, including 3 professors, 3 associate professors and 2 senior engineers.
Department of Electromechanical and Architectural Engineering: 27 full-time teachers, the vast majority of whom have postgraduate degrees or above, and professors and associate professors from Jianghan University and other institutions are employed all year round.
Department of Biological and Environmental Engineering: Professors and associate professors account for more than 40% of the faculty. (Arts and Science, undergraduate, four years)
I. Cultivation Objectives
This program is designed to cultivate high quality students who can adapt to the needs of the modern tourism industry, have professional knowledge, advanced management concepts, and solid professional skills in modern tourism management, and who have humanistic qualities, international perspectives, practical abilities, and a sense of innovation, and who can work in all kinds of tourism-related enterprises, institutions and related departments to engage in operation and management, service and consulting. The program is designed for senior specialists with high comprehensive quality, excellent vocational skills and strong market adaptability.
Specialized Main Courses and Special Courses
Specialized Main Courses: Management, Microeconomics, Macroeconomics, Introduction to Tourism, Tourism Economics, Management of Travel Agencies, Tourism Resource Development and Planning, Tourism Marketing, Psychology of Tourism, Tourism Financial Management, Introduction to Hospitality Management, and Tourism English.
Travel Agency Management (Module) Featured Courses: Tour Guide Business, Travel Agency Product Design and Promotion, Tourism Service Marketing, Scenic Spot Operation and Management.
Hotel Management (Module) Featured Courses: Hotel Operation and Management, Hotel Front Office and Housekeeping, Catering Management, Hotel Marketing.
Three, career direction
Travel Agency Management (Module): After graduation, students can be engaged in travel agencies, tourist attractions, airlines and other modern service enterprises and tourism administrative departments and various types of tourism industry associations in the management of related work, but also to continue to study the master's degree in economic management.
Hotel Management (Module): After graduation, students can work in modern service enterprises such as high-star hotels, senior catering organizations, convention and exhibition companies and tourism administrative departments and various tourism industry associations to engage in related management, and can also continue to study for the master's degree in economic management. (Arts and Science, undergraduate, four years)
I. Cultivation Objectives
This major is designed to cultivate students who have mastered the basic theories of management, economics, and marketing and marketing skills, have the ability to comprehensively apply relevant knowledge to identify, analyze and solve marketing problems, and can engage in marketing research, marketing planning, sales and service management, and other marketing operations and management work in both for-profit and non-profit organizations. Service management and other marketing business and management of applied technology-based senior specialists.
Specialized Main Courses and Special Courses
Specialized Main Courses: Management, Microeconomics, Macroeconomics, Accounting, Marketing, Consumer Behavior, Marketing Research, Sales Management, Modern Advertising, International Marketing, Business Negotiation, E-commerce, Internet Marketing, Logistics Management, Statistics, Financial Management, and so on.
Automobile Marketing (Module) Featured Courses: Automobile Marketing Practice, Automobile Culture, Automobile 4S Store Operation and Management, Automobile Service Engineering, Automobile Insurance and so on.
Internet Marketing (Module) Featured Courses: SEO Website Marketing, Internet Integrated Marketing Planning, Web Design and Production, Website Construction and Maintenance, Internet Marketing, etc.
Three, the direction of employment
Marketing activities have penetrated into all walks of life, marketing professionals are currently leading the main force of the market demand for talent, supply and demand. After graduation, students can be engaged in various enterprises, institutions and government departments in marketing and management and other related aspects of work. Can also continue to study economic management master's degree.
Automotive marketing (module) students after graduation is particularly suitable for automobile manufacturing enterprises or automobile distribution enterprises engaged in marketing planning, vehicle and parts sales, after-sales service, market research, channel development and other work.
Internet Marketing (Module) is especially suitable for students to engage in internet marketing, e-commerce, website maintenance, enterprise information management and customer service in various enterprises after graduation. (Arts and Sciences, undergraduate, four years)
I. Cultivation Objectives
This major cultivates to adapt to the needs of the modern market economy, with a humanistic spirit, scientific literacy and integrity, with knowledge and ability in economics, management, law and financial management; can be engaged in financial management in profit-making and non-profit organizations in the work of the occupational skills excellent market adaptability Applied technology-oriented senior specialists.
Specialized Main Courses and Special Courses
Specialized Main Courses: Management, Microeconomics, Macroeconomics, Statistics, Financial Accounting, Managerial Accounting, Financial Management, Monetary and Banking, Financial Analysis, and Investment.
Investment Finance (Module) Special Courses: Investment Finance, Insurance, Credit Rating, International Investment;
Asset Appraisal (Module) Special Courses: Asset Appraisal, Advanced Financial Accounting, International Accounting Standards, Auditing.
Practical courses: manual account simulation experiment, accounting software application, financial analysis simulation experiment.
Third, the direction of employment
The students of this program can be engaged in investment, professional financial management, financial management, accounting, asset valuation and other work in all kinds of enterprises at all levels and relevant government departments after graduation. They can also pursue a master's degree in economics and management through their own efforts.
Investment Management (Module): It mainly conveys talents of financial management, financial management and investment to commercial banks, financial enterprises, accounting firms and other units.
Asset Appraisal (Module): It mainly delivers talents in accounting, budgeting and asset appraisal to accounting firms, real estate enterprises and other units. (Undergraduate)
Cultivation Objectives
This specialty is committed to cultivating people with good ideological morals and professionalism, more systematic nursing and related medical and humanities and social sciences, preventive health care and other basic theories, basic knowledge and basic skills, with the basic clinical nursing ability, nursing management ability, nursing teaching ability, nursing research ability, and lifelong learning ability, and be able to engage in clinical nursing, geriatric nursing, community health care. They have the basic clinical nursing ability, nursing management ability, nursing teaching ability, nursing research ability and lifelong learning ability, and are able to engage in clinical nursing, geriatric nursing, community medical nursing, nursing care, preventive health care, nursing management, nursing teaching and scientific research and other work of senior nursing application-oriented specialists.
Employment prospects for nursing
Domestic: Nursing profession is included in the Ministry of Education, the Ministry of Health and other six ministries and commissions of the national shortage of personnel specialties to be focused on support. In our country, the number of nurses is far from enough, the ratio of medical care is seriously disproportionate. According to the requirements of the Ministry of Health, the ratio of doctors to nurses in our hospitals is 1:2, while the current national ratio of 1:0.61 between doctors and nurses is far lower than the requirements of the Ministry of Health, and the ratio of 1:8.5 with the developed countries is even farther apart. According to the statistics of the Ministry of Health, the number of nurses in China, an average annual net increase of 115,000 people, undergraduate nursing talent is even more in short supply, according to statistics, the entire nursing team in the undergraduate level of nurses accounted for only 10% in recent years, the domestic employment rate of undergraduate nursing graduates are more than 98%.
With the transformation of China's aging society, the future of the elderly in medicine will be in demand, the elderly health care nurse will also become a high-paying popular careers. And with the improvement of people's living standards, the disease spectrum of the population has changed, the demand for chronic disease care increased, private home caregivers will become a high-paying popular occupation.
At present, many hospitals in large and medium-sized cities in China have outpatient clinics for foreigners, and some joint venture hospitals and "foreign" hospitals have taken root in Beijing, Shanghai and other places. Therefore, if the nursing talent has nursing, nursing interpersonal communication, nursing etiquette and other professional knowledge, but also has a certain foreign language skills, then the employment options will be broader, can be engaged in foreign health care services in China, high-paying jobs. International: With the surge in demand for nursing personnel in the international medical market, the phenomenon of "nurse shortage" has become increasingly prominent in front of the medical profession of various countries. In the next 10 years, the United States, the United Kingdom, Canada, New Zealand, Singapore, Japan and other countries around the world will be in urgent need of 2 million nursing personnel, international human resources companies have set their sights on China. The worldwide shortage of nursing talent resources, to China's nursing staff to create more opportunities to step out of the country, step into the international market for employment. Industry experts believe that the nursing profession has always been one of the higher status, well-paid careers internationally. Such as nurses in the United States average annual salary of 6-9 million dollars, while the United States is short of 300,000 nurses. Britain, France, Germany and other Western developed countries have many favorable policies for nurses. Therefore, nurses with profound professional knowledge, high comprehensive quality and fluent language of international communication have broad prospects for employment and development in the international arena.
Nursing career field
Many people do not understand the field of nursing employment, that after graduation can only engage in clinical nursing career. In fact, with the people's increasing demand for medical and health services, the employment field of nursing talent continues to expand, nursing undergraduate can be employed in the following areas after graduation.
1. All levels and types of hospitals, emergency centers engaged in clinical nursing
2. High-end nursing homes and rehabilitation institutions engaged in rehabilitation nursing
3. Various types of nursing institutions engaged in elderly care and health management
4. Insurance companies and health management agencies engaged in related management
5. Baby-sitter, private home caregiver, beauty tutor, etc.
6. Pharmaceutical companies and medical equipment companies to engage in publicity and sales
7. Medicine and health care, epidemic prevention, medical schools and other institutions and units to engage in related work
8. Holding the relevant certificates to go abroad to do the work of the nursing staff (the nursing staff abroad is very good treatment, the demand for a large amount of). The College has taken the medical profession as a new growth point for the College's transformation and development, relying on the investor's background in the medical industry and the high quality medical education resources of Jianghan University to host the nursing undergraduate program. The college will also give full play to the advantages of independent colleges in terms of funds, talents, policies and institutional mechanisms, and increase the investment in the construction of faculty, disciplines, laboratories, clinical practice bases, etc., so as to cultivate more and better nursing undergraduates who meet the needs of the society for the country's fast-developing healthcare industry. (Science and technology, undergraduate, four-year system)
I. Cultivation objectives
This major cultivates the basic knowledge and application of mechanical design and manufacturing capabilities, can be engaged in mechanical engineering and related fields of design and manufacturing, applied research, scientific and technological development, operation and management, management and marketing work, with a thick foundation, wide-caliber, application-oriented senior engineering and technical personnel. It focuses on cultivating students' comprehensive quality, professional and technical foundation, practical ability and innovative consciousness.
Specialized Main Courses and Special Courses
Specialized Main Courses: Drawing Geometry, Mechanical Drawing and Computer Graphics, Engineering Mechanics, Mechanical Design Basics, CNC Technology, Electrical and Electronic Technology, Interchangeability and Technical Measurement Basics, C Programming, Control Engineering Basics, Engineering Materials and Heat Treatment.
Featured Courses: Basic Mechanical Manufacturing, CNC Technology, Hydraulic and Pneumatic Transmission, CNC Machining Programming, Electromechanical Transmission Control, Engineering Optics, Machine Tool Electrical Control and PLC, Mechanical Engineering Testing Technology, Optical Mechatronics System Design, and Pro-E Practical Technology.
Third, the direction of employment
The students of this specialty after graduation can be engaged in the front line of domestic and foreign enterprises in the design of mechatronics products, manufacturing, process development, technology development, application research, operation and management, sales and after-sales service and other aspects of the work; can take advantage of the foundation of the school's learning, through their own efforts to continue to pursue a master's degree in mechanical engineering. The employment situation of this profession is good, the employment field involves the engineering machinery, mechanical parts, CNC equipment development and maintenance, automotive industry, etc.; employment throughout the coastal large and medium-sized enterprises, state-owned enterprises and institutions. Including the Dongfeng mold punch company, Shenlong company, Wuhan Lian plastic precision mold company, the United States Group and other enterprises. (Architectural Engineering Direction) (Science and Engineering, undergraduate, four-year)
I. Cultivation Objectives
This specialty cultivates the basic theory of architectural engineering, the basic methods and basic skills, and obtains the basic training of civil engineers, applied, complex senior specialists; with the basic ability to work in the relevant fields and professional skills, to adapt to the direction of engineering surveying, design, construction, management, cost, supervision, data and other aspects of the project, and so on.
II. Main Courses + Special Courses (Practical Sessions)
Architectural Drawing and CAD, Theoretical Mechanics, Mechanics of Materials, Structural Mechanics, Engineering Measurement, Civil Engineering Materials, Building Architecture, Geotechnics and Foundation, Reinforced Concrete and Masonry Structures, Steel Structures, Civil Engineering Construction Technology, Organization and Management of Building Construction, Engineering Budgeting and Bidding, Structural Design of High-rise Buildings, Engineering Data, Engineering Construction Supervision, Real Estate Development and Management, Engineering Project Management, Graduation Design, Engineering Training, Professional Internship, and Graduation Internship.
Third, employment direction
The graduates of this major can be engaged in the following aspects of work, can be engaged in construction, data, design and technical management and other related work in the building construction enterprises, real estate development enterprises, architectural design institutes, transportation road and bridge companies, municipal corporations, steel companies, etc.; can be engaged in the construction, data, design and technical management and other related work in the supervision company, project management companies, cost consulting companies or government management departments and other related departments. They can be engaged in construction supervision, bidding, project management and costing in supervision companies, project management companies, cost consulting companies or governmental management departments and other related departments. They can also make use of the learning foundation of the school and continue to study for master's degree in related majors through their own efforts. (Science and technology, undergraduate, four-year)
I. Cultivation Objectives:
This major is mainly oriented to the automobile, machinery, electronics, home appliances and other industries, to cultivate the basic knowledge of mechanical and material science, skilled use of computer technology for hardware mold, plastic mold design and manufacturing, but also engaged in product design, as well as materials processing and forming related to the quality control, production management and business operations They can also be engaged in product design, quality control, production management and sales related to material processing and molding. This session is divided into Dongbei Group Orientation Class module and mold digital design module two module training.
Specialized main courses + special courses:
Main courses: mechanical drawing and AutoCAD, engineering mechanics, mechanical design, metal technology (casting, forging, welding, heat treatment), materials science, electrical and electronic, forming principles, CNC technology, mold manufacturing process, C language
Special courses (mold digital design module): stamping die design, plastic mold design, die casting module, die casting module. Design, plastic mold design, die-casting mold design, UG and Pro/E, mold CAD/CAM (MasterCAM, MoldFlow), automotive body repair technology
Featured Courses (Dongbei Group Orientation Class Module): The courses of the digital design module of the die and mold are interlinked with the courses of the digital design module of the mold, and then according to the needs of the Dongbei Group, the corresponding courses are added or subtracted, and the courses are taught by school-enterprise joint lectures.
Third, the direction of employment:
Dongbei Group Orientation Class (Module): Oriented to cultivate talents for Dongbei Group, adopting the mode of school-enterprise joint training. After graduation, students can be engaged in product development, development of new materials, new technologies and new processes, professional computer software technology training, production management and other work in the Group by two-way choice. They can also choose to work in other related fields at home and abroad, and those who are interested in further study can pursue master's degree in the fields of materials, machinery and so on.
Digital Design of Moulds (Module): After graduation, students are employed in popular industries such as automobile, machinery, electronics and electrical appliances at home and abroad, and can be engaged in the design and manufacture of moulds such as hardware moulds, plastic moulds, product design, training of professional computer software technology, as well as all the quality control, production management and operation and sales work related to material processing and molding. Those who are interested in further study can pursue master's degree in materials, machinery, automotive and other fields.