How to install the ground stake of human body static discharge alarm? How much resistance should be appropriate?

Installation of human body static discharge alarm ground stake when personnel wear wristbands, touch the static discharge ball connected to the grounding line release, grounding resistance is generally about 1 ohm.

In the neutral point below 1000v direct grounding system, grounding resistance Rd less than or equal to 4 ohms, repeated grounding resistance less than or equal to 10 ohms. The voltage 1000V below the neutral point of the ungrounded system, the general provisions of the grounding resistance Rd is 4 ohms. Therefore, according to the actual installation experience, in the street lighting system grounding resistance Rd should be less than or equal to 4 ohms.

The static alarm is made of high-precision electronic components with high precision, fast response speed, strong anti-interference ability, small size, light weight, easy to use and other characteristics; for human wrist strap grounding system has an automatic alarm function, you can always monitor the anti-static wrist strap work status, running without noise, for anti-static (personal) work area of the wrist strap grounding system to provide a reliable guarantee. The system can provide a reliable guarantee for the anti-static (personal) work area wrist strap grounding system.

● Can monitor two wristbands and multiple wristbands at the same time. 

● Human wrist strap grounding system normal operation: no sound, green light.

● When the human wristband grounding system is disconnected: there is a beep sound and red light flashes.