An independent enterprise with legal personality should have the following characteristics:
1. It must have reasonable independent business conditions and complete formalities, formally registered in the *** competent authorities for the record, and obtain *** and the formal recognition of the law.
2. It must have independent economic accounting rights, an independent balance sheet, to income against expenditure, self-supporting; it can be independent of the outside world, independent production and business activities.
3. It must be able to independently undertake civil property obligations, and can participate in civil activities and litigation in its own name, the legal person's capacity to determine the establishment of the organization's purpose and scope of business, not entitled to carry out contrary to its purpose and beyond the scope of its business legal acts. The legal person's capacity to act is exercised by the organs or representatives of the legal person (directors, factory directors, managers, etc.), or by its authorized business personnel in the name of the legal person.
The unincorporated organization refers to social organizations that do not have legal personality, but can carry out social activities in their own name.
The characteristics of the unincorporated organization are: (1) the unincorporated organization is the body of organization; (2) the unincorporated organization is the body of organization with the corresponding civil rights and civil capacity; (3) the unincorporated organization is the body of organization can not independently assume civil liability.
The main difference between the two is that one can be independently liable, while the other is not
The original legal entity is responsible for the unified procurement, acceptance and distribution, the business intermediate links are more, can be changed to (or authorize) by the unincorporated unit of the independent purchase and acceptance? Subordinate unincorporated units have passed the GSP special certification, with independent acceptance and storage conditions.
Whether through the GSP certification, certification, whether with the legal person drug wholesale enterprises at the same time certification. If it is certified at the same time with the legal person drug wholesaler, and the declaration material affirms that the unincorporated drug wholesaler is not self-picked, not set up a warehouse, it must be the legal person responsible for the unified procurement, acceptance, distribution. Now if you want to buy goods independently must obtain the consent of the legal person drug wholesalers, apply for separate GSP certification; if the certification is independent of the certification, the terms and conditions in line with the GSP standard, can be completely independent of the goods.
Legal entities have long been certified, unincorporated units (branches) GSP certification is independent of the special certification (passed), but special certification is not independent of the goods, is distributed through the legal entity, the branch warehouse hardware facilities, but also independent acceptance of the maintenance room, acceptance of personnel, equipment, equipment, and instruments, and now want to authorize the independent purchase, acceptance, so that you can Accelerate the efficiency of business turnover, so that the branch to carry out business more convenient and smooth.
Question 2: How to fill in the state of the equipment on the automatic import license New equipment is written "new", the old equipment is written "old" I have previously handled is always written in this way!
Question 3: equipment, instruments and other services and facilities how to fill out a unit of the file should be the first from the beginning of the classification, the organization of the file is constantly classified and numbered. Units should be organized from the local state archives to buy files, and should not be purchased from what the measurement of the Association. All units of archives are required to use all levels and types of national archives supervised archival supplies, such as archival boxes, archival bags, archival catalogs (such as ...
Question 4: How to write equipment management Equipment management system (plant management systems) in order to ensure the normal safe operation of production equipment, to maintain its technical condition intact and constantly improve and enhance the quality of the enterprise's equipment and the preparation of a number of regulations and statutes. Generally should include: equipment management system and institutional setup provisions, equipment fixed asset management system, equipment management system, equipment, equipment, equipment transformation, renewal management system, imported equipment, key equipment management system, equipment maintenance program management system, equipment maintenance technology management system, equipment management and maintenance of financial management system, equipment statistics, assessment system, equipment accident management system, pressure vessels and other special
Table of Contents I. Equipment use, maintenance procedures for the development, modification and implementation of procedures for the development and modification of the requirements for the use of equipment, maintenance procedures must include the contents of (a) the use of equipment procedures must include the contents of: (b) the maintenance of equipment procedures should include the contents of: the use of equipment, the maintenance of the implementation of the procedures for the implementation of the equipment, the management of the technical condition of the equipment management equipment lubrication management (a) the management of equipment lubrication requirements: (a) for Equipment lubrication management requirements: (b) lubrication "five" chart development, implementation and modification. (C) analysis and laboratory management of lubricating oil and grease. (d) The application of new technology of equipment lubrication and oil renewal management. Equipment defects in the handling of equipment operation dynamic management (a) the establishment of a sound system of equipment inspection standards (b) the establishment of a sound inspection assurance system (c) information transfer and feedback (d) the application of dynamic information (e) equipment weaknesses in the establishment of a project to deal with. (F) the management of weak links "equipment management system" books to expand First, the use of equipment, maintenance procedures for the development, modification and implementation of procedures for the development and modification of the requirements for the use of equipment, maintenance procedures must include the contents of (a) the use of equipment procedures must include the contents of: (b) equipment maintenance procedures should include the contents of: the use of equipment, the maintenance of the implementation of procedures for the implementation of the equipment, the management of the contents of the equipment equipment, equipment, technical status The management of equipment lubrication management (a) the requirements of equipment lubrication management: (b) lubrication "five" chart development, implementation and modification. (C) analysis of lubricating oil and grease laboratory management. (D) The application of new equipment lubrication technology and oil renewal management. Equipment defects in the handling of equipment operation dynamic management (a) the establishment of a sound system of equipment inspection standards (b) the establishment of a sound inspection assurance system (c) information transfer and feedback (d) the application of dynamic information (e) equipment weaknesses in the establishment of a project to deal with. (F) the management of weak links.
First, the use of equipment, maintenance program development, modification and implementation of equipment use, maintenance program is based on the use of equipment, maintenance instructions and production process requirements to guide the correct operation of the use and maintenance of equipment regulations. The plants and mines belonging to major companies, companies must establish and improve the use of equipment and maintenance procedures.
Requirements for the development and modification of the regulations 1. Plant (mine) first of all in accordance with the principles set out in the management system for the use of equipment, correctly divided into types of equipment, and in accordance with the status of the equipment in the production, structural complexity, and the use of equipment, maintenance difficulties, the equipment will be divided into: important equipment, the main equipment, general equipment, the three levels, in order to facilitate the preparation of the regulations and the hierarchical management of the equipment.
2. Where the installation of the equipment in use, must be done to achieve a complete set of use, maintenance procedures.
3. The new production equipment, plant (mine) to be responsible for 30 days before the commissioning of the equipment to develop the use, maintenance procedures, and issued for implementation.
4. When the production is ready to adopt a new process, new technology, 10 days before the change in process, the production plant (mine) should be based on the new use of equipment, maintenance requirements of the original program to modify, in order to ensure the effectiveness of the program.
5. Post in the implementation of the regulations, found that the content of the regulations is not perfect to reflect the level of timely, regulations management professionals should immediately go to the scene to verify the situation, the content of the regulations to add or modify.
6. Newly written or modified regulations, should be approved according to the relevant provisions of the professional management contracting system.
7. The use of many years, the content of the more modified regulations, the third year through the masses and professional management of the combination of the factory (mine) organization to re-revise the issue, and at the same time, notify the original regulations are invalid.
8. When serious defects occur in the equipment, and can not be immediately shut down to repair, we must develop reliable measures and temporary use, maintenance procedures, by the plant (mine) approved the implementation. After the elimination of defects, the temporary program is void.
Equipment use, maintenance program must include the content (a) equipment use program must include the content: 1. Equipment technical performance and allow ...... >>
Question 5: What is the status of the equipment above the Chinese people's **** and the country's automatic import license? 10 points old and new can be online electromechanical class themselves filed it
Question 6: How to fill in the form of major equipment and production capacity Bidding for the "production capacity" column of the safest and most common fill: "good", "General", "poor", bidding directly on the fill "good" the most insurance.
Issue 7: review of the use of equipment To do a good job of equipment management, you need to start from the following aspects:
First, equipment management and staffing
1. Set up equipment management department, staffing to adapt to the needs of the enterprise equipment management and maintenance work, the work of someone is responsible for, and to maintain relative stability.
2. There are plant-level leaders in charge of equipment. The person in charge of equipment management should have a college level of education (or have a technical title of intermediate or above), through job training, practical work experience.
3. Equipment management and equipment management departments and departments related to equipment management functions and responsibilities are clear.
4. Equipment management network at all levels (factory, workshop, team) is sound and normal activities.
5. Equipment maintenance organization is sound.
Second, equipment management regulations
In accordance with national regulations and industry regulations, the development and timely revision of equipment management regulations:
(1). Special equipment [including boilers, pressure vessels (including gas cylinders), pressure piping, lifting machinery, plant-specific motor vehicle management system;
⑵. Equipment pre-management (including equipment procurement and bidding management) system;
(3). Equipment asset management system;
(4). Equipment use and maintenance system;
(5). Equipment maintenance management system;
(6). Equipment spare parts management system and so on.
Third, equipment management procedures and standards to determine
Equipment management and maintenance of a variety of work standards, technical standards, safety regulations, maintenance procedures, maintenance procedures, overhaul procedures, workflow and technical documents are complete, correct and standardized.
Fourth, the technical and economic data statistics
Timely and accurate filling of equipment management statistical reports and analysis and summary. Equipment management technical and economic indicators should meet the requirements of the industry or relevant departments. Technical and economic indicators (see appendix for statistical methods) include:
1. safe operation of equipment:
1. Special equipment inspection rate;
2. Equipment accident frequency;
3. Equipment accident downtime rate;
(4). Equipment accident statistics.
2. Equipment technical indicators:
(1). Main equipment completion rate, all equipment completion rate;
(2). Main equipment utilization rate, all equipment utilization rate;
(3). Comprehensive efficiency of equipment;
(4). Leakage rate of dynamic and static sealing points;
(5). Equipment overhaul program completion rate;
(6). Instrumentation "three rates": completion rate, control rate, open meter rate;
(7). Equipment idle rate.
V. Pre-equipment management
1. The equipment management department is responsible for or involved in equipment renewal, technological transformation, new projects, expansion projects, homemade equipment and sporadic equipment purchase planning and bidding procurement work.
2. Equipment management should be involved in equipment selection, installation, commissioning, completion and acceptance. Key equipment should be involved in its technical and economic analysis and demonstration.
3. Equipment management should be involved in homemade equipment design program research and validation work.
4. Equipment management department is responsible for or involved in the selection of equipment off the work, and put forward on spare parts, lubricants, equipment installation and commissioning and maintenance of technical information and other requirements.
5. Equipment management should be newly commissioned equipment found in the early use of quality, functionality, efficiency and other deficiencies in a timely manner to the manufacturing unit feedback, prompting the manufacturing unit to develop and implement corrective measures to ensure that the quality of the equipment, functionality, efficiency standards.
6. Equipment purchases, should grasp the manufacturing, sales unit qualifications and performance status. In the procurement of special equipment, should be in accordance with the "Regulations on the Safety Supervision of Special Equipment" requirements, in the bidding documents clearly stipulate that the bidding unit should have the appropriate level of design qualifications, production qualifications, and products should be provided at the time of shipment of documents, information, shall not be purchased illegally produced products.
7. Procurement and use of state-ordered elimination and prohibition of the use of process equipment that jeopardizes production safety is strictly prohibited.
Sixth, the technical basis of equipment management
1. Equipment technical files are complete and complete. Technical data storage in line with the provisions of the relevant technical file management.
2. Equipment drawings, technical documents, completion information is complete and accurate; special equipment required technical documents, drawings, information should be collected in accordance with the provisions of the "Regulations on the Safety Supervision of Special Equipment" complete.
3. Equipment spare parts catalog is complete, clearly categorized; spare parts with procurement (manufacturing) plan and reserve quota; inventory spare parts clear procedures, complete documentation, accounts, cards, things match; storehouse clean, spare parts without corrosion damage, good storage.
4. The development of specialized equipment and general equipment, equipment safety regulations, and often on the operators of equipment operation knowledge training, assessment, complete records.
5. National and local technical supervision departments issued by the relevant laws and regulations of special equipment, regulations and provisions of the complete, and often on the equipment management personnel and operators to carry out publicity, and its operators should have the relevant technical supervision departments issued by the operation of the certificate, the license on duty.
6. Special equipment ...... >>
Question 8: How to fill in the daily use of special equipment status record table is mainly the use of the user, the date of use, the use of the process of whether the situation (whether normal), if there is maintenance, write down the maintenance content, it is best to write down the maintenance of the person (whether it is internal or external repair), and finally do not forget to hand over to the leadership to confirm the signatures of the leaders, of course, can be confirmed once a month or once a week.
Question 9: How to fill in the daily use of special equipment record sheet Hello, you will be special equipment safety law on the use of the unit's requirements, combined with the unit's situation can be written.
The implementation of the organization, the implementation of the development of the system, the implementation of personnel training, the use of the registration card for the situation, the maintenance of equipment, regular inspection and so on.
Special Equipment Safety Law
Section IV Use
Article 32 The use of special equipment should be used to obtain permission to produce and tested special equipment.
Prohibit the use of state-ordered out and has been scrapped special equipment.
Article 33 of the use of special equipment should be put into use before the special equipment or put into use within thirty days after the department responsible for the supervision and management of special equipment safety for the use of registration, use of the registration certificate. Registration mark should be placed on the special equipment in a prominent position.
Article 34 The use of special equipment should be established by the unit of responsibility, hidden trouble management, emergency rescue and other safety management system, the development of operating procedures to ensure the safe operation of special equipment.
Article 35 The use of special equipment shall establish special equipment safety technology files. Safety technology files should include the following:
(a) special equipment design documents, product quality certification, installation and use of maintenance instructions, supervision and inspection certificates and other relevant technical information and documents;
(b) the regular inspection of special equipment and regular self-inspection records;
(c) the daily use of special equipment records;
(d) special equipment, the daily use of the situation;
(e) the use of special equipment, the use of special equipment, the use of special equipment, the use of special equipment, the use of special equipment.
(D) special equipment and its affiliated instrumentation maintenance records;
(E) special equipment operation failure and accident records.
Article 36 of the elevator, passenger ropeways, large amusement rides and other special equipment for the public to provide services to the operation of the use of special equipment, should be responsible for the use of special equipment safety, set up special equipment safety management bodies or full-time special equipment safety management personnel; other special equipment use units, should be set up according to the situation of special equipment safety management bodies or full-time, ** **. * special equipment safety management personnel.
Article 37 The use of special equipment should have the required safety distance, safety protection measures.
With special equipment safety-related buildings, ancillary facilities, should be consistent with relevant laws and administrative regulations.
Article 38 of the special equipment belongs to the *** have, *** someone can entrust the property services unit or other managers to manage the special equipment, the trustee to perform the obligations of the special equipment unit under this law, bear the corresponding responsibility. *** someone did not entrust, by *** someone or the actual manager to fulfill the management obligations, bear the corresponding responsibility.
Article 39 The use of special equipment should be used by the special equipment for regular maintenance and regular self-inspection, and make records.
Special equipment should be used by the unit of special equipment, safety accessories, safety protection devices for regular calibration, overhaul, and make records.
Article 40 The use of special equipment should be in accordance with the requirements of the safety specifications, in accordance with the requirements of the inspection qualification expires one month prior to the expiration of the special equipment inspection agency for periodic inspection requirements.
Special equipment inspection agency received a regular inspection requirements, in accordance with the requirements of the safety specifications should be carried out in a timely manner to test the safety performance. Special equipment should be used by the unit of regular inspection mark in the special equipment in a prominent position.
Without regular testing or inspection of unqualified special equipment, shall not continue to use.
Article 41 of the special equipment safety management personnel should be used for regular checks of special equipment, found that the problem should be dealt with immediately; in case of emergency, you can decide to stop the use of special equipment and report to the person in charge of the unit in a timely manner.
Special equipment operators in the course of operations found in accidents or other unsafe factors, should immediately report to the special equipment safety management personnel and the unit responsible; special equipment operation is not normal, special equipment operators should be in accordance with operating procedures to take effective measures to ensure safety.
Article 42 The special equipment failure or abnormalities, special equipment units should be a comprehensive inspection to eliminate potential accidents, before continuing to use.
Article 43 of the passenger ropeways, large-scale amusement rides in the daily before they are put into use, its operation and use of units should be carried out trial runs and routine safety inspections, and check the safety accessories and safety protection devices to confirm.
Elevators, passenger ropeways, large amusement rides operation and use of units should be elevators, passenger ropeways ...... >>
Question 10: How to write the reason for equipment sealing? Generally speaking, the state of the equipment can be divided into sealing, in use, idle, scrapped, etc., the reason for sealing is that the equipment is idle for a long time, sealing management.