Sample resume for supplier quality engineer

Now located in Guangdong - Guangzhou, China. >

2004-09 ~ 2008-07 Sichuan Agricultural University Geographic Information System Bachelor's Degree

2001-09 ~ 2004-07 Xiaohe Vocational High School, Nanjiang County, Sichuan Province Computer High School

Training Experience

2011-05 ~ 2011-05 ZTE Corporation. /ZTE "supplier quality training" "Certificate of Completion"

**Company (2011-09 ～ present)

Company nature: foreign-funded enterprises Industry: automotive, motorcycle and spare parts

Position: Supplier Quality Engineer / SQE Job Category: SQE / Supplier Quality Engineer

Job Description: 1, new Supplier introduction and new material approval.

2, IQC incoming material inspection specification development and update.

3, IQC LRR monitoring and supplier side OQC management.

4, production line DPPM monitoring and supplier-side process management.

5, the bad material caused by the customer complaint processing and the supplier side of the counseling.

6, the daily handling of material abnormalities, based on the quality of weekly, monthly, QBR quarterly report on the evaluation of suppliers and Disqualify unqualified suppliers.

7, annual and the above links required supplier site audit.

Reason for leaving: N/A

**Company (2010-03 ～ 2011-08)

Company nature: private sector Industry: electronics, microelectronics technology, integrated circuits

Positions held: Quality Customer Complaints Engineer / QA CS Engineer Job Category: QA / Quality Engineer

Take the lead in formulating the treatment plan for online products, in-stock products, in-transit products and returned products that are subject to customer complaints in the factory;

Negotiate with customers on the treatment plan for defective finished products/semi-finished products on the client's side and compensation matters, respond to customer's 8D report and be responsible for the follow-up of quality improvement.

2, for the customer major quality problems Complain, lead to promote the factory responsible departments / processes special analysis and improvement;

Collate information, write ad hoc reports to organize the responsible departments / processes responsible for the client Report.

3, the establishment of the bridge between the customer and the factory, on a regular basis or from time to time to the client side of the understanding / learning, the latest customer requirements / standards. In a timely manner, the latest customer requirements / standards to the plant, leading the relevant departments / processes in the plant will be the latest customer requirements / standards into the plant can be operated / implementation of customer standards, and to promote the introduction of the plant to implement.

4. When the customer comes to the factory for Audit, lead the relevant departments/processes to complete the collaboration.

Reason for leaving: personal development

**Company (2008-08 ～ 2010-02)

Company nature: multinational companies (group) Industry: electronics, microelectronics technology, integrated circuits

Position: Quality Assistant Engineer / QA Assistant Engineer Job Category: QA / Quality Engineer

Job Description: 1, to the supplier to the sampling to be shipped PCB, provide inspection reports;

If there is a quality problem, the use of QC methodology to analyze the Root Cause, to verify that the supplier to provide the Root Cause and Corrective Action of the real reliability, through the Audit follow-up Corrective Action implementation and improvement effect.

2, Review supplier shipment report, Check supplier shipment samples.

3, dealing with customer quality Complain, when there is a customer complaint, notify and with the supplier to the client site in a timely manner to deal with, and follow up the follow-up of the return, replacement, Rework, scrap and claims and other matters.

Reason for Leaving: Personal Development

Project Experience

Toyota Way (2011-09 ～ 2011-11)

Position: Team Member

Project Description: Implementation of Toyota Way to further standardize the production site. Way, to further standardize the company's production site management

Responsibility: 1, receive training, participate in the development of the plan.

2, take the lead and promote the implementation of all staff.

3, and Team Member Check implementation effect.

4, continuous improvement.

Occupational Health and Safety System/OHSAS18000 (2010-04 ～ 2010-05)

Position: Team Member

Project Description: Introducing the Occupational Health and Safety System/OHSAS18000, to protect the employees from workplace accidents

Responsibility: 1, participate in the advance plan Development.

2, with Foucus task team members to the production site to find the source of safety hazards.

3. Coordinate with the relevant responsible parties to rectify or prevent the source of safety hazards.

4, to assist the internal auditor Audit and continuous improvement.

Lean Manufacturing / LEAN (2009-05 ～ 2009-10)

Position: Team Member

Project Description: Introduction of Lean Manufacturing / LEAN, to improve the company's production efficiency

Responsibility: 1, participate in the development of the introduction of the plan, details and Schedule.

2, based on the plan, details and Schedule.

3, Check the implementation effect and expected goals.

4, according to the actual implementation status of PDCA continuous improvement.

Skills Expertise

Professional Title: Supplier Quality Engineer

Computer Skills: National Computer Grade Exam Level 2

Detailed Computer Skills: Proficient in Shopflow/ERP system, MiniTAB, PS, CAD, common databases and various types of OFFICE (Excel, word and Power Point, etc.) office and other software.

2, currently engaged in the SQE position, responsible for PCB, electronic materials, institutional parts (metal, plastic), wire and packaging materials supplier quality management, specializing in PCB materials supplier quality management.

3, 3 years of PCB industry experience, familiar with the IPC series of standards, PCB process flow, engaged in PCB quality management (QA) and quality customer complaints (QA CS) work.

4, engaged in computer and peripheral products assembly and maintenance, network installation and maintenance and other technical work, skilled use of computer hardware and software.

5, stable, rigorous, with good quality assurance personnel.

Language ability

Mandarin: fluent Cantonese: general

English level: EF 4 speaking general

English: good

Other: N/A

Job Intention

Development direction. SQE/SQA/SQM (Supplier Quality Management)

Other Requirements: N/A

Self

Self-assessment: Serious work, hard-working, sense of responsibility and mission, and do our best to strive for the company's highest interests.