There is radiation. In the concentration of radiation sources in the environment of work, study, life, easy to insomnia, memory loss, weakness, weakness, low immunity, etc., the growth rate of cancer cells than normal people 24 times faster. How far is radiation from us In our living environment, radiation is everywhere! Household appliances: TV, refrigerators, air conditioners, microwave ovens, vacuum cleaners, etc. Office equipment: cell phones, computers, copiers, electronic equipment, medical equipment, etc. Home decoration: marble, composite flooring, wallpaper, paint, etc. Surrounding environment: high-voltage lines, power substations, television (radio) signal transmission towers, etc. The natural environment: sunspots, etc. A healthy one can withstand a short period of 5,000 R load, but only 700 R dose is enough to make a healthy person. A healthy person can withstand a short period of 5000R load, but only 700R dose is enough to make a healthy person suffered a fatal threat, but each person's body resistance is different, each person will have different degrees of symptoms. Generally, exposure to electromagnetic radiation can cause headaches, insomnia, irregular heartbeat and other central nervous system problems. At the same time, some people's eyes may be affected, vision loss, skin diseases and other phenomena, and in some cases may cause cancer. It may cause miscarriages in pregnant women, and is especially important for elderly people with cardiac pacemakers. At the same time, different people or the same person at different ages to electromagnetic radiation tolerance is not the same, even in the excessive environment, does not mean that all people will get sick, so there is no need to electromagnetic radiation "grass". However, the elderly, children, pregnant women or patients with pacemakers, sensitive to electromagnetic radiation and long-term work in an environment where the dose of electromagnetic radiation should be taken precautionary measures.
Will there be radiation at work in the electronics factory?
Analysis: Hello, electronic factory radiation is relatively large, especially PCB circuit board workshop, the heavy metal content of those types of work is relatively high, although there are purification clothing, but the work time is too long ingot body still has a certain impact.
Is there radiation in the electronics factory
Radiation is certainly there, the welfare is certainly not.
Television electromagnetic radiation is 10 times greater than the computer
Television electromagnetic radiation is particularly powerful medical experts say that the family should pay attention to prevent electromagnetic pollution, television, VCDs, computers, cell phones, electric water heaters, rice cookers and other electromagnetic pollution more or less harmed everyone's health.
The electromagnetic radiation of the TV is 10 times that of the computer,
When watching TV, you should be more than 3 meters away from the TV, and you should wash your face after watching. Computer screen will radiate anions, the operation should be away from 30 centimeters or more, the boot moment electromagnetic radiation is the largest, should be avoided, the best every hour after the machine rest activities for a while.
Microwave oven: open, people should be at least 0.5 meters away from the stove, not in front of the stove for a long time. Food from the stove, should be put a few minutes before eating. In addition, it should be frequently tested for microwave leakage, the simple method is: open the radio on the side of the stove, open the microwave oven if the radio is interfered with, it is said that there is a microwave leakage, and should be timely to ask the technician to overhaul.
Cell phones: Each call should not be too long, and it is best to turn off the phone at night. When charging, it should not be placed in someone's place or in the bedroom.
Electric blanket: Even if you turn off the switch, it will still disturb the natural electric field in the body, which is most damaging to pregnant women, children and the elderly, and should be used with caution.
Electronic alarm clock: as far as possible, not in the bedroom, or away from people more than 1.5 meters, it is best to use a mechanical alarm clock instead.
1. Radiation can easily induce cancer
In addition, computer radiation pollution can affect the human circulatory system, immunity, reproduction and metabolic functions, and seriously induce cancer, and accelerate the proliferation of human cancer cells.
2. Impact on the reproductive system
The impact on the reproductive system is mainly manifested in the lower quality of men ***, pregnant women, spontaneous abortion and fetal deformities, etc.
3.
3. Impact on the cardiovascular system
Impact on people's cardiovascular system manifested in palpitations, insomnia, some women's menstrual disorders, bradycardia, decreased blood flow, sinus irregularities, leukocyte reduction, decreased immune function, etc.
4.
4. Impact on the visual system
People's visual system has an adverse effect, because the eyes belong to the human body on the sensitive organ of electromagnetic radiation, excessive electromagnetic radiation pollution will also have an impact on the visual system. The main manifestation of vision loss, causing cataracts and so on.
Nowadays, there are very few work away from the computer, the average person at home can not leave the microwave oven, television and other electronic products, the surface of the earth's radio cell phone signals filled the entire space, to not be radiated unless isolated from the world. So buy radiation protection clothing pants is a worry about the superfluous.
Is there really radiation in electronics factories?
First, the circuit will cause the frequency affect your brain Second, the parts are cleaned by chemical solvents Third, welding welding colloid suspended silica dust Lastly, it should be noted that the ventilation system is generally not standardized or even not running
Electronics factory work on the body there is no harm
Common occupational hazards in the electronics industry
1. chemical hazards, at present, there are hundreds of chemicals used in the electronics industry, and the number of chemicals used in the electronics industry is not enough. Hundreds of chemicals used in the electronics industry, the harm to the human body varies, the main invasion pathway is skin penetration and respiratory inhalation. Electronic factories commonly use certain toxic and harmful solvents as cleaning agents, such as washboard water, the main component is trichloroethylene. Trichloroethylene impairs liver function with symptoms similar to hepatitis. Some patients with trichloroethylene poisoning have died because they were misdiagnosed as having liver disease and were not given the right medication. Tianna water is also commonly used and usually contains benzene and toluene. Benzene is a highly toxic chemical, highly carcinogenic, chronic benzene poisoning patients with aplastic anemia, both leukemia, toluene can also cause acute or chronic poisoning. In addition to solvents, a variety of heavy metals on the human body is also very harmful, and, due to the accumulation of heavy metals in the body is not easy to discharge, will have long-term health effects, and even lifelong impact. In electronic factories, most of these heavy metals (compounds) exist in the form of dust or fumes, which are inhaled by workers for a long time, causing poisoning or overloading of chemicals in the body.
2. Radiation, common ionizing radiation in the electronics industry are: X-ray (commonly used in the production of circuit boards, test circuit errors), radioisotopes (commonly used to test whether there is air in the parts after sealing). Consequences of exposure to excessive ionizing radiation include: cancer, miscarriage, congenital disabilities, premature aging, and anemia. Common non-ionizing radiation includes: radio waves (often generated in plasticizing, bonding, welding, curing epoxy, etc.), microwaves, infrared, ultraviolet, and lasers. Among them, microwave, ultraviolet and laser are the most dangerous non-ionizing radiation. Medical studies show that workers exposed to excessive microwaves can cause heart, thyroid and nervous system problems. 3. Noise and Other Harmful Factors Noise in electronics factories mainly comes from metal pounding machines, cutting instruments, grinding and packaging machines. Excessive volume or harsh noise can strain the human body and even lead to permanent deafness. In addition to high temperature, dust, assembly line operation of psychological tension, ultra-micro industry visual fatigue and continued poor operation *** and other impact on the health of workers should not be ignored.
Precautionary measures to prevent occupational hazards in electronic factories, including: strengthening the workplace ventilation and decontamination, noise and sound insulation, shielding; the use of gas masks, gloves, glasses, earplugs and other protective equipment; the occurrence of acute occupational hazards of the incident pressures, should be taken immediately to take emergency rescue and control measures.
Is there radiation in the assembly line of the electronics factory
Yes
Is there radiation in the electronics factory? 5 points
Radiation from components, the whole machine in the case of conductive radiation increases, in the case of non-conductive, individual components only, such as electrolysis, diodes and transistors and so on containing chemical components have. But these radiations are not particularly harmful, as for infrared radiation, a look at the layman, infrared radiation is not radiation, only radiation, the common DVD light is infrared, only after the light emitted by the power to radiate, but the factory inside the head of this infrared components will not let the workshop to energize the power even if it is energized, it is best for you not to look at the beam of light, to avoid. If you can shoot straight for about ten minutes, ensure that your eyes will be shot through!
Don't worry, in short, the radiation is there, the damage is negligible, too small, too small.
And your first sentence is very think can be to speechless, earn some money and then and home to point money to do a thing by yourself? I don't know if it's a good idea to start a business. The first thing you need to do is to get a job, and then you have to go out and get a job. You can think about it, but that's not called starting a business, it's called being created! Don't dream of starting a business if you don't have a skill! You may not like to hear, but you can go to understand!
What you said behind the anti-static, huh, the factory will not let you wear, unless you are into the military unit, the general factory for the electrostatic requirements are not high, you may not know how the electrostatic is a matter of fact, I tell you, electrostatic is not a kind of radiation, it can be said that only on the components of the damage, no harm to the people if the factory to let you wear this, that means that afraid of the components of the bad, or the precision of the not Accurate. Antistatic can buy a few dollars of hand circle, circle to the hand on the line, do not need to get so exaggerated!
In short, the feeling that you are making a big deal out of it!
Electronic factory radiation, the harm is great
Yes, there is radiation ah
Electronic factory radiation?
How much there must be
Is the radiation in the electronics factory
Analysis: not much. Those computers, printers and other electrical appliances auxiliary radiation is unavoidable, can only stay away from a little, in front of the computer to put some radiation-absorbing plants. If the workshop staff, the face of the main machine, radiation is not very big.
Suggestions: If you are pregnant, you still need to protect your baby, wear anti-radiation clothes ah, or, change the working environment.