2. Turn off the water source: before installing the faucet connector, you need to turn off the water source to avoid unnecessary trouble caused by water flow.
3. Disassemble the old faucet: Use the wrench to disassemble the old faucet and remove the old faucet from the water pipe.
4. CLEAN THE WATER PIPE: Clean the surface of the water pipe with a clean cloth or paper towel to make sure the surface of the water pipe is clean and dust-free.
5. Wrap the plumbing tape: Wrap the plumbing tape around the threads of the water pipe to enhance the seal.
6. Install the faucet coupling: Insert the faucet coupling into the water pipe and tighten it with a wrench to make sure the faucet coupling is tightly connected to the water pipe.
7. Connect the water pipe: connect the water pipe to the faucet fitting and screw it tightly with a wrench to make sure the water pipe is tightly connected to the faucet fitting.
8. Turn on the water source: after the installation is completed, turn on the water source and check whether the faucet connector is leaking.
9. Test: open the washing machine, test whether the faucet connector is working properly, if there is any problem, deal with it in time.