What is the quality of ordinary 3D printing consumables production line?

Answer: Equipment advantage: 1. The optimized heating and cooling system is adopted, which is divided into n temperature control zones, and each temperature control zone has a thermocouple, so that the material temperature is always kept in a controllable state and the product performance is guaranteed. The temperature control accuracy reaches 65438 0℃.

2. The cycloidal mechanism has a high-precision limit sensor and a linear tracking device, which ensures accurate positioning and orderly winding. Avoid knotting and blocking when using 3D printing consumables.

3. The traction roller adopts servo motor with stable speed and stepless speed regulation. Can quickly respond to the change of extrusion speed. The product line diameter accuracy is stable: 0.02mm, which improves the product grade.

4. High-performance servo motor with wide speed range and more stable speed.

5. Advanced Siemens PLC control system and 10-inch touch screen operation greatly improve the humanization, intelligence and safety of 3D printing consumables production equipment system.

3D printing consumables production line

Service ability: excellent service ability, providing complete technical consultation. Customizable high-temperature type, with temperatures as high as 450℃ and 65438 0℃. To meet the processing requirements of PEEK, pek, pi and other high-temperature special engineering plastic wires.

2. Provide perfect installation, debugging and training services. There is a QC department, and all parts will be inspected immediately after arrival. After the equipment is installed and debugged, we will carry out intermittent start-up test for at least 24 hours to ensure that the machine performance reaches the standard and issue the factory report.

3. Provide 1 year warranty service. In the case of non-human damage, provide free parts replacement. In case of man-made damage, only the cost of parts will be charged, and free on-site service will be provided when necessary.

3D printing consumables production equipment products

Equipment parameters: model: SESI-45/28B

Screw diameter: 45 mm

Length diameter ratio of screw: 28

Screw speed: 0-75 rpm

Linear speed: 0- 100 m/min

Wire diameters: 1.75mm, 2.85mm, 3mm.

Accuracy of wire diameter: 0.02 mm.

Pressure measuring range: 0-50mpa

Accuracy of pressure measurement: 0.5%f.s

Heating/cooling mode: electric heating/fan cooling.

Working temperature: room temperature -450℃

Temperature control accuracy: 65438 0℃

Maximum output: 20kg/hour.

Main motor power:11.8kw.

Control mode: Siemens PLC control.

Working voltage: three-phase 380VAC10%, single-phase 220VAC10%, 50Hz.

Rated power: about 30kw

Length× width× height:12000mm×1450mm× 2100mm.

Total weight: about 2 100kg.