Nothing CEO Carl Pei, has just revealed some interesting details about the upcoming ear(1) true wireless headphones, which are set to be released next Tuesday. The wearable audio device is said to come with a translucent case, a large 570mAh battery, and support for wireless charging and wired fast charging.
The headphones can reach 24/36 hours of battery life with Active Noise Cancellation (ANC) on or off. But just 10 minutes of charging will replenish it with 6-8 hours of audio playback.
Nothingear (1) features transparent design elements for both the headphones and the casing.CarPei revealed in an interview that it was actually quite difficult to achieve this.
After all, juggling the aesthetics of the exterior while keeping the various modules, such as the microphone, battery, Bluetooth, and antenna, all working properly can pose an additional challenge.
CarlPei expects the market for true wireless headphones to continue to grow. And with manufacturers like Apple, Huawei, Xiaomi, and Realme all pushing white models of headphones, a clear case will allow Nothingear (1) to stand out in the market.
Finally, CarlPei confirmed that the headphones are already in the manufacturing process. Also by later this year, the company will launch another product, but no further details are known at this time.
Nothingear (1) true wireless headphones released: transparent shell active noise reduction, battery life of 5 hours
IT home on July 28 news by a plus co-founder Pei Yu founded an independent brand Nothing, on July 27 officially released its first product: Nothingear (1) true wireless bluetooth noise-canceling headphones. This product adopts in-ear design, half of the headset shell is fully transparent design, you can clearly see the internal noise-canceling microphone, filter, PCBA circuit board.
Nothingear(1) weighs only 4.7g in a single ear, and carries an 11.6mm large-diameter dynamic coil unit with large-volume front and rear sound chambers to ensure excellent high-frequency, mid-frequency, and low-frequency sound quality. Officially, the headphones have been tuned by teenage audiophiles.
The headphones support active noise cancellation, three microphones on one side. With touch operation, it can be switched to pass-through mode with one click. The product has a call wind noise reduction function, while supporting IPX4 level waterproof. The inner side of the headset has a sensor that automatically stops playback when taken off.
The charging case for these headphones is also fully transparent, very unique and exquisite, and supports wireless charging. The middle circuitry and battery components are wrapped, and the earphone handle has two charging contacts.IT home learned that Nothingear(1) headphones provide exclusive apps for iOS and Android platforms, which can adjust the equalizer, customize the touch gestures, and find the earbuds.
In addition, the product supports Google FastPair technology, which allows you to quickly pair with your phone by opening the lid.
As for battery life, the headphones last 5.7 hours with Nothingear(1) active noise cancellation and up to 34 hours with the charging case. With active noise cancellation turned on, the headphones last 4 hours on one ear and 24 hours with the charging case. The product will go on sale in August, but officials say they will sell a limited edition of the headphones on July 31 on their website.
How long is the average Bluetooth headset battery life?
The average better Bluetooth headset has a battery that lasts 7-8 hours of continuous talk, 5-6 hours of music listening, and 10-11 days of standby.
The length of the battery life of Bluetooth headset is mainly based on the quality of the battery has a relationship. Good quality wireless Bluetooth headset battery can be used time is generally 2-3 years. Poor quality wireless Bluetooth headset battery can be used time is generally about 1.
We can usually pay attention to protect the battery, you can reduce the drain on the battery. For example, Bluetooth can be turned off when charging charging, Bluetooth do not call when charging, etc..
Bluetooth pairing
1, the first time you use it, try to let the headset charge for about 2-4 hours, and then charge it for 2 hours, the manual also says so, the best not to exceed 4 hours, some forums say that it must be charged for 24 hours is not based on such a small headset, charge for 24 hours, some over-exaggerated.
2, click on the Bluetooth settings in the phone settings, select "on", complete. This turns on Bluetooth support on your phone.
3, in the Bluetooth headset off state, press and hold the headset multi-function key MFB more than 3 seconds, to be on the headset on the indication of the blue light on (1, note that is always on, the pairing process has always been always on, not blinking or do not light up 2, there are some devices for the red and blue alternately flashing), this time, the Bluetooth headset is in the state of being found.
4, open the Bluetooth option on the phone, to find, successfully search for the headset will be displayed on the list of Bluetooth headset name and model, click to confirm.
5, on the phone to enter the password (usually 0000), there are some no password, the headset indicator light flashes quickly, that is, pairing success.
From the introduction of the French brand EOZ announced the introduction of the new true wireless headset EOZAir in Taiwan, using Bluetooth 5.0 chip, and the market common true wireless headset is a big difference is that the left and right ear can be used independently as a call, and there is no master, from the distinction (agents corrected the actual operation of the master is still the left ear), and with the charging box can be up to 90 hours of total battery life. The MSRP is NT$3,680.
Perhaps taking into account the stability of the use of the wearer, as a true wireless headset EOZAir modeling in the upper still retains the traditional around-ear headset ear hanging design, at first glance, some like wired headphones, but also with the neck cord accessory, will be the left and right ear through the neck cord hanging in the neck, although this is more or less a bit lose the significance of the true unlimited, but in another direction do not have to worry about such as the general bluetooth headphones, the left and right connectivity cable depletion problem. The newest addition to the Bluetooth headset is a new cable that connects to the left and right earbuds.
The monobloc uses a larger 8mm graphene actuator monobloc with a standard 20Hz-20kHz frequency response, and the shell is a nano-coated ABS shell with a PVD coating on the back of the earhooks to provide IPX5 waterproofing, and the left and right ears each carry a 50mAh battery that provides 5.5 hours of battery life. The charging case provides an additional 2,200mAh battery and extends this to 90 hours of music playback, and the charging case utilizes a USB Type-C interface.
How long will the Sony True Wireless Headphones WF-1000XM4 last on a full charge?
It depends on how you use it, just like the sound requirements, the length of time and frequency of using the headphones, and so on. However, under normal circumstances, Sony True Wireless Headphones WF-1000XM4 with noise cancellation on, the headphones can be used for 8 hours + the charging case can provide 2 recharges, which is 16 hours, a **** can last about 24 hours. If the noise canceling is turned off, it can be used for 12 hours + the charging case can provide 2 charges, which is 24 hours, a **** can be used for about 36 hours. It has a fast charging function, charging for 5 minutes, you can play music for about 60 minutes, so you don't need to worry about the power.