First, the choice of electronic wire harness protection sleeve needs to be based on the location of the harness to determine the location of the harness, because the application of the complexity of the harness scene, so the protection sleeve according to the application of the location of the environment to select the anti-temperature, anti-mud and water, cold, heat-resistant, insulated and other different specifications of the protection sleeve.
Second, the electronic harness assembly and maintenance to be convenient, complex harnesses need to be manufactured in sections. In the assembly through the terminals to connect the multiple sections of the harness to form a complete set of harnesses, but the harness design time segments the less the better, so that you can avoid too many terminals and produce pressure drop, and easy to cause poor contact phenomenon.
Third, in the replacement of the electronic harness before the appearance of the inspection, the new harness model should be adapted to the original equipment model, wire terminals and wire connection is reliable, can be pulled by hand to pull the plug and wire, to observe whether there is a loose, fall off and other phenomena.
Fourth, the electronic wiring harness should be properly installed, the electrical equipment plug, plug, socket and harness on the socket, plug corresponds to the connection of the wires and electrical equipment connected to the wires, to leave a certain margin, find the line can not be pulled too tight.
The original article from the electronic harness, the original address: / html/show-26-75-1.html