Philips is a very famous brand in China, Philips purifier is the air purifier industry has a great call for the brand, attracted a lot of consumers to buy its Philips purifier. Although Philips purifier with its brand and very high cost-effective to win the favor of consumers, but it still has some inevitable faults, will affect people's use of it. Therefore, the significance of this article is to sort out its common faults and related maintenance methods, so that users can be solved when encountering related problems. Here is a look at the Philips purifier repair.
Philips Air Purifier Repair Steps
First of all, we all know that negative ions are the main factor used by Philips Air Purifier. Therefore, if the concentration of negative ions is too low, it will not achieve the purpose of purifying the air. Therefore, if the Philips air purifier negative ion concentration does not meet the standard, it may be due to the purifier filter impurities or dust is too much caused. In this case, you need to disconnect the power supply of the purifier, disassemble the purifier, and use the relevant tools to clean the dust or impurities on the filter.
The fan does not turn is also Philips air purifier will appear fault. But this fault has two situations, respectively, its high-voltage indicator light is bright and does not light two conditions. If the indicator light is on, then it is the problem of the electric fan, first of all, you need to clean the electric fan, and then see if it can work properly, if it still does not work, directly replace the same specifications of the fan can be. If the indicator light is also not bright, then it is the problem of the circuit. You need to check the fuse and the transformer separately to see if there is a problem, and if there is a problem, you can directly replace it.
If the Philips air purifier appears to produce negative ions in the area of the phenomenon of fire, then there are two possible reasons, one is due to the environment in which the air is too humid, to solve this problem just need to replace it to a drier place. Rather, it is due to the positive and negative poles between the poles of the problem, this problem, just need to use the relevant work on the poles can be corrected.
What are the Philips air purifier failures
One, the low concentration of negative ion output
The reason for this situation is: (1), high-voltage generator circuit faults lead to high-voltage is too low; (2), the filter and electrode above the dust, too much dirt, resulting in the bending and deformation of the positive and negative pole piece.
How to repair
After cutting off the power supply, clean the dust on the fan motor and electrode, which can be done with a long bristle brush, and alcohol cotton balls. If the problem still exists, then you need to check the circuit by multimeter.
Two, the fan does not rotate, high-voltage indicator light
The reason for this situation is: high-voltage indicator light shows that there is no problem with the circuit, it is possible that the fan malfunction;
How to repair:
Because of the failure caused by the fan, you can clean the fan, and then use a multimeter to measure the windings open or short circuit, then it is best to replace the same specifications of the fan motor.
Three, the fan does not rotate, high-voltage indicator does not light
The reason for this situation is: mainly because of the power supply fuse fuse or high-voltage generator circuit failure;
How to repair:
(1) the power supply fuse fuse, then replace the new fuse on the line; (2) the high-voltage generator circuit failure, then first use the multimeter to measure, if the step-up transformer coil burned out, then you can only replace the fan motor of the same specification. Transformer coil burned out, then only to replace the same type of transformer.
Four, negative ion generator between the pole fire
The reason for this situation is: (1), the air is too humid; (2), positive and negative pole piece bending deformation;
How to repair:
(1) humidity caused by the replacement of dry places; (2) deformation, then use tweezers to correct the pole piece.
Maintenance method
1. Pre-filter (?). Generally? for the back cover of the chassis) used for a long time, will gather some dust, which affects the air intake, affecting the effect of air purification. So, you need to use a vacuum cleaner to suck the dust away, or use a rag to clean it, or even wash it.
2. Filter, part of the filter is the need to regularly get the sun to the sun, the purification efficiency in order to better maintain, such as activated carbon filter.
3. Deodorant filters, a few brands of air purifiers deodorant filters to reach the technical level of washable, can be washed, that is, to maintain the efficiency of purification, to extend the cycle of changing filters.
4. Ion generator, a? Generally built-in, do not need to clean, the better ion generator work efficiency are higher.
If the purchase of Philips air purifier, and its use in the use of the relevant failures mentioned in this article, can be flexible to use the methods mentioned in this article on its maintenance processing, then the significance of this article can be successfully realized. Of course, the content of this article must also have incomplete places, I hope you can self-improvement, and put forward to everyone *** with progress. The above is about Philips purifier repair, I hope it can help you!
Tuba Rabbit online free of charge for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get free Oh~