Structural features:
1, the inner chamber is made of mirror stainless steel, semi-circular arc corners are easy to clean, the box shelf spacing adjustment.
2, microcomputer temperature (humidity) controller temperature (humidity) control is accurate, stable and reliable.
3, forced circulation air ducts to ensure uniform temperature in the studio.
4, the air duct is installed with heater, cooler, temperature sensor.
5, double glass door observation window, observation is convenient and clear.
Installation and commissioning:
1. Be careful not to exert force on the glass or collide with the box during transportation. Prohibit inverted and greater than 45 ° diagonal placement.
2, this equipment after landing, should be placed smoothly such as uneven ground should be corrected.
3, please do not use the instrument in direct sunlight or high temperature and humidity, the use of ambient temperature to maintain 10-30 ℃.
4, this equipment should be far away from the source of electromagnetic interference, and should be effectively grounded equipment grounding wire.
5, the equipment in normal operation, the box load should not affect the placement of air circulation to ensure that the box air circulation, temperature uniformity.
6, the power supply is AC220V50HZ, must use 10A three-core socket, and have a reliable grounding wire, not unauthorized use of two-core socket.
7, the power cord should not be close to the back, and do not let the instrument or other items pressed on the power cord, so as not to damage the power cord
Precautions and Maintenance:
1, the incubator in the handling, prohibit inverted and greater than 45 degrees of flat.
2, do not change the setting value frequently in use, so as to avoid frequent startup of the compressor caused by overload, affecting the service life of the equipment.
3, the box does not need lighting, should be placed in the lighting switch "off" position, so as not to affect the upper temperature, while extending the service life of the lamp.
4, the machine is equipped with two sets of fuses, if a failure occurs during operation, please cut off the power supply, check whether the fuse is intact, and then check other parts.
5, in order to maintain the appearance of the equipment, do not use corrosive solutions to wipe the exterior, the box can be wiped with a dry cloth or alcohol to keep the box clean.
6, when the equipment is not in use, should keep the box dry, and cut off the power supply.
7, in order to ensure that the temperature inside the box is uniform, should always check the box axial fan is running normally. When the experiment, the items placed in the box do not overcrowding, do not block the fan outlet, must leave space for air circulation in the box.
8, do not touch, collision box temperature, humidity probe, resulting in temperature, humidity out of control.
9, equipment failure, should ask a professional maintenance or contact with the sales department of the factory, the user should not arbitrarily dismantle the repair.