One-stop special plastic solution provider - Zhenghao special plastic PEEK manufacturer leaves to take you to reveal:
Everyone should know that the PEEK gears are widely used in aviation, aerospace, medical and other fields, the PEEK material as a high-performance engineering plastics, and the tooth-shaped parts as a common precision parts of mechanical equipment, the processing difficulty and requirements are higher, the following follow the Zhenghao PEEK manufacturers leaf's footsteps to understand the PEEK tooth-shaped parts machining considerations.
1. Select the appropriate tool
PEEK material has a high temperature, high strength, high hardness and other characteristics, so in the processing need to choose wear-resistant, high temperature resistant suitable tool. At the same time, pay attention to the cutting edge geometry and cutting angle of the tool to ensure the processing efficiency and quality of the finished product.
2. Control of machining parameters
In the machining of PEEK toothed parts, you need to control the machining parameters, including feed rate, speed, depth of cut, etc.. Too large or too small machining parameters will affect the processing efficiency and finished product quality. At the same time, attention needs to be paid to cleaning the cutting area in a timely manner to prevent defects such as thermal cracks in the PEEK material during machining.
3. Reasonable design of fixtures
Reasonable design of fixtures can ensure the accuracy and stability of the machining of tooth parts. In the PEEK tooth-shaped parts processing, need to pay attention to the fixture on the parts of the fixed strength and clamping mode, in order to avoid deformation of the parts or shifting in the process of processing and other issues.
4. Maintain a stable processing environment
PEEK material has high environmental requirements, the need to maintain a stable processing environment temperature, humidity and other parameters. At the same time, to avoid static electricity and other problems during processing, to ensure the quality and safety of processing.
In short, the processing of PEEK toothed parts need to fully consider the characteristics of the material and processing requirements, select the appropriate processing technology and equipment, to maintain the stability of the processing environment, in order to ensure the quality and accuracy of the finished product.