JAY-9721
First, the purpose of the equipment:
Charging pile plug socket locking device insertion and extraction force testing machine can meet the GB/T20234.1-2015 standard chapter 6.3, 7.3, 7.4 test requirements, the machine adopts a servo motor drive, PLC intelligent control. This machine adopts servo motor drive and PLC intelligent control, and is suitable for testing the insertion force and pull-out force of plugs, locking devices between vehicle sockets and plug socket connectors of new energy charging vehicles.
Second, the equipment test items:
Please click to enter the picture description
1, connector single hole insertion and removal test
2, connector insertion and removal test
3, connector insertion and removal test
4, connector single Pin and plastic retention test
5, connector back to Pin test
6, connector insertion and removal test
7, connector insertion and removal test
8, connector insertion and removal test
9, connector insertion and removal test
6, connector positive force test (Normal Force)
7, a variety of compression, tensile strength test
8, terminal load resistance test
9, terminal or connector impedance
10, locking structure test.
Three, equipment features:
1, connector insertion and removal life decay curve analysis of the test, the connector row of insertion and removal test, single PIN retention force test, connector products, insertion force and displacement, and pull-out force and displacement test, connector single-hole insertion and removal test, connector test; general compression and tensile damage test
2, test data stored in the Hard disk, printable (each piece of information can be stored, unlimited)
3, test conditions can be set by the computer screen, convenient and fast (including insertion and extraction stroke, speed, pause time, etc.)
4, the standard equipment: test machine body 1, the control system (Lenovo laptop, with a Canon inkjet color printer, mouse and computer locks 1 piece), Window System insertion and extraction control software, a set of load yuan, clamping nozzle 1 set, X-Y mobile platform 1, the whole row of insertion and extraction of automatic centering device (multi-functional fixture), a single hole insertion and extraction of automatic centering device (single round clamping fixture), a single PIN to keep the force of the test fixtures, special fixtures
Four, the composition of the equipment:
Test machine body, computers, monitors, printers, load yuan (50, 20, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5), the test machine body, computer, monitor, printer, and the test machine body. Yuan (50, 20, 5, 2kg to choose a)
Large X-Y moving table, the whole row of insertion and extraction of automatic centering device (multi-functional clamping fixtures), single-hole insertion and curvature extraction of automatic centering device (a single round clamping fixtures)
Fifth, the parameters of the equipment:
Test force value of 100N to 2,000N can be preset to switch the unit of kgf, N, Lb, gf load decomposition degree 1/250,000Load Accuracy±0.5%Load Minimum Display0.01gf,0.01kgfDisplacement Minimum Display0.001mmTesting Speed0.01~200mm/min or 600mm/minSpeed Accuracy±0.5%Motor AC Servo MotorMachine Dimension360x270x950mmWeight 70kgMotor AC220V 50Hz or specified
02 Charging pile insertion and extraction force test device
JAY-9742
Product Overview:
This test device is designed and manufactured according to the following standards: GB/T20234.1-2015 Connection device for conductive charging of electric vehicles, Part 1, GB/T18487.1-2001 Conductive charging system for electric vehicles, Part 1: General requirements, and GB/T18487.1-2001 Conductive charging system for electric vehicles, Part 1: General requirements. Part 1: General Requirements; applicable to the connector insertion and extraction test, through the computer analysis, can accurately measure the load to be measured and the corresponding change curve of the stroke, and can accurately control the insertion and extraction stroke, speed, set the number of times and pause time. Especially the special fixtures, more convenient to test the connector can be more automatically aligned, the use of servo motors and PLC control system, easy to operate, and all data can be stored.
Product features:
One of the plug and socket life testing machine using high-grade aluminum frame, aluminum alloy plate, custom fixture mechanism, slider guide, stepping motor plus screw. Customized fixture, characterized by four sides of the clamping adjustable center, clamping the workpiece firmly and not easy to loosen and both sides with a guide rail to ensure that each action is in the same position. Touch screen operation panel combination, easy to use; can be matched with the power load box floor-standing sheet metal box, current, voltage, power factor adjustment, to achieve no-load charged (rated voltage, no current) insertion and extraction cycle test and do not break the short-circuit mode cycle test.
Please click to enter the picture description
Technical Parameters:
1, Insertion and extraction force range:0-500N
2, the range of movement :200mm (adjustable)
3, the smallest fine-tuning distance:0.01mm
4, the range of test speed:0~200mm/ min
5, fixture disk size: Φ200mm
6, X-Y moving table moving range: 0~75mm minimum reading 0.01mm
7, the connector automatic centering device: XY axis maximum compensation ± 2mm, angle maximum compensation - any angle
8, load :40N, 50N or 100N, 500N,
9, equipment size about: 1500 * 500 * 700mm
10, machine power supply: AC220V
03 rotary tension tester JAY-2145
Rotary tensile tester product overview:
This device is also known as the degree of damage to the conductor test device, in line with the GB20234.1, GB2099, GB16915.1, GB1314.3, GB14048, IEC884, IEC60947 and other standard requirements, mainly used to determine the threaded clamping type of terminals in the design and structure of whether to achieve in its clamping of wires without excessive damage to the conductor requirements, but also used to examine whether the unthreaded terminal withstand the Normal use of institutional stress. Use can be preset test times, to the set value will automatically stop, and accompanied by sound alarm signal.
The main difference between this machine is that it can do a larger wire damage test, and all the tests, height adjustment up to 464mm, the corresponding supporting rotating weights (maximum 22.7kg) and tension weights (maximum 578N), according to the actual situation can be selected.
Two, rotary tensile tester technical parameters:
1, working power: AC 220V 50HZ
2, working speed: 10 ± 2 rpm
3, counting range: 0 ~ 9999, the default of 150 times (15min)
4, rotary weights: 13, 13 tension weights (standard)
6, rotary weights (maximum 22.7kg) and tension weights (maximum 578N), can be selected according to the actual choice. /p>
6, rotating diameter: 75mm
7, wire sleeve aperture respectively: 6.4, 6.5, 9.5, 12.7, 13, 14.3, 14.5, 15.9, 19.1, 22.2, 25.4, 28.6mm
7, the height distance: 260-480mm infinitely adjustable
8, the external dimension : 790mmX400mmX1100mm
9, wire, wire casing, height and weight selection parameter table
Wire cross-sectional area mm?Diameter of the casing hole mm height mm and the wire corresponds to the weight kg tension N0.26.42600.310-6.42600.3200.5(6.4)6.52600. 3300.75(6.4)6.52600.4301.0(6.4)6.52600.4351.5(6.4)6.52600.4402.59.5(279)2800.7504.09.5(279)2800.9606.09.5(279)2801.48010.09.5(279) 2802.09016.0 (12.7) 13.0 (298) 3002.910025.0 (12.7) 13.0 (298) 3004.5135-(14.3) 14.5 (318) 3205.915635 (14.3) 14.5 (318) 3206.8190-15.93438. 62365015.93439.52367019.136810.42859519.136814351-19.13681442712022.24061442715022.24061542718525.443216.8503-25.443216. 850324028.64642057830028.646422.75781, Tolerance of height H: ±13mm. 2, If the diameter of the casing hole is too small to accommodate the wire without tightening, you can use a larger size casing hole. 3, The values in the parentheses are the values of the GB14048 and IEC60947 standards. Please click on the input picture description