1, due to the wireless signal is susceptible to the weakening of metal objects is particularly serious, so in the installation to ensure that the host and the extension of the vicinity of the host does not have a large number of metal objects/materials, high-frequency electrical equipment, electromechanical equipment, etc., if these items in the host and the extension of the closer, then it will seriously affect the product's wireless signal coverage, so that the wards of the bedside of the call extension signal sent out by the host is likely to host The signal from the call extension at the bedside of the ward will probably not be received by the host, affecting the normal use of the patient.
2, the extension registered in the host above the call number must be and bed number corresponds to, for example, extension 1 must be installed in the bed of the 1st bed, extension 2 must be installed in the bed of the 2nd bed of the bed, the other numbers must be so, so as to ensure that when the patient presses the bedside pager, the doctor and the nurse can know specifically which patient is seeking help, in order to be able to Timely treatment. Call number setting is also very simple, refer to the manual a few minutes to learn to set up, in the procurement of hospitals can also be entrusted to us to set up on behalf of the hospital so that hospitals can use the product directly after receipt.
3, to ensure that the signal can cover every hospital ward, which is the premise of normal use, it is recommended that after the completion of the installation, the hospital to arrange for staff to each ward to press the call button next to the bed, another staff member in the nurses station next to the host computer to observe, to check whether each bed call extension call signals can be received by the host computer of the nurses station. If they can be received normally, the signal coverage is not a problem, can be put into use; if some wards of the extension signal can not be received by the host, indicating that the signal coverage is insufficient, it is necessary to install a signal amplifier in the middle of the host and the extension of the signal amplification process, so that the host of the nurses station can be received.