Practical training, that is, "internship (practice)" plus "training"; this originated in the IT industry management practice and technical practice; introduced to the "marketing management" and "business management" specialization. "Business Management" profession. The following is my personal training to bring you a summary of the universal version, I hope to help you yo!
Personal Practical Training Summary Universal Version 1
After four weeks of practical training, I benefited a lot, I gained the most is that I feel that a lot of work I need to feel and explore, to not be afraid of suffering, the courage to surge forward, there are some work, although singled out and repetitive, but this is to sharpen the will of the most effective method, I I caution myself to complete seriously, for each practical training tasks should be seen as an assessment of their own, to do everything in the process of encountering difficulties, we must strive not to abandon, do not give up, adhere to the "fight", as long as the hope is still there, the victory must belong to us.
The content of our practical training is "student achievement management system", first of all, we would like to thank the accompaniment of our 4 weeks of careful guidance to our teachers, to help us in the process of practical training to solve a lot of problems we can not solve, so that we can continue to complete the next content and so that the results of our practical training has been a complete success. Success. In the learning process is not all smooth sailing, in which, because to operate a lot of things, sometimes a step wrong, the results of the latter can not be displayed, and their own computer is too poor to check out where the error! At this time, the teacher will patiently come over to help me, I am very grateful to the teacher also very grateful to the school can arrange such a good teacher to teach us! There is the power of the team, for a large software system, not a person can be completed, he needs to team members of the unity and cooperation between the group, although at the beginning of the group between the members of the group's views are not very unified, but we have their own views, bar their own ideas put forward, and then brainstorming, we believe that the best views out, and finally completed the "student achievement management system" practical training! The results of the management system "practical training.
In the course of this training, the teacher also during the period to let our groups to show our training results, by other groups to put forward the views, to make up for the shortcomings of the other groups to do better than us, we have to learn from the bad place we will work together to think of ways to solve the problem. This is for our future to society has a certain exercise nature.
As students, we are more textbook knowledge of understanding, the advantage of theory is our characteristics, but how to combine theory with practice is a problem in front of us. Some of the knowledge we have learned, but to apply it to the system in the process of a lot of problems, such as the use of controls listview and datagridview, based on the multi-table query, the use of datagridview control is difficult to realize in the database of multiple table updates, and then we chose the listview We chose the listview control. From here let me know, just learning is not endless, we only in the continuous learning to understand more, and can learn the knowledge of the three, so that we can better do better to the practical training program to do better. I think that learning this, I participate in the work after the tabulation, create queries, data analysis and material presentation have a great role, so that we can more clearly understand the information and analysis.
Of course there are more feelings in the internship, including learning, life aspects. As far as learning is concerned, professional practical training it is more emphasized on application, more detailed, and more stringent requirements. In the actual realization of their own ideals, the need to constantly increase their ability to do things more focused. As far as life is concerned, professional learning shows us the results of practical training of different groups, so that we know that we have to be good at learning the advantages of others.
The above understanding is positive, and is the main part of their own benefit, but personally, this professional training is more
is to let themselves realize their own shortcomings. Through this practical training, it is more of a review and introspection of the sophomore semester. Overall, we are more successful in this internship, we can learn a lot of things on campus, in the classroom, textbooks can not learn, but also to understand a lot and know the truth of being a person, especially to experience the hardships of life and find a job is not easy.
Do software this thing can not be anxious, the more anxious about our learning is more unfavorable. The more you do it, the less you will learn. You have to keep your mind steady, start simple, and don't rush things. In the learning process there will be a lot of times when the mood is very depressed, is in the learning can not go on, but insist on a good, heavy to insist on it, there is nothing impossible in the past. There is also usually pay attention to more accumulation so that in the future with knowledge of the time will not worry about the lack of resources.
Four weeks of practical training class soon came to an end, I found that I have a new understanding of the computer, before only know to play games, entertainment and simple applications. Through this practical training, I learned that to really master the computer program is not a simple and easy thing, but really mastered, it will bring us endless convenience and technology, I like high-end convenient life. I hope I can be the master of the computer this omnipotent robot rather than a slave, I will try to do my best! Thank you for the school, thank you for the teachers to help me, so that my thinking, skills and on a new level! Thank you! I'll try my best!
Personal Practical Training Summary Universal Version 2
Under the guidance of the teacher, in the group members of the *** with the efforts, our two-week practical training period has ended.
This short 14 days is both a training and a challenge for us. The training is to train us to work in the future should have the ability to operate, to train us to think independently, careful observation and calmly deal with the encountered fault ability. Challenge is to challenge our ability to accept the frustration and pressure, so the practical training for us, let us from young to mature a step forward! As the chemical simulation teacher said, through this practical training, each student has matured a lot!
Not only that, we also complete the purpose of this practical training, learned a lot of knowledge and realized a lot of truth! In fact, before the practical training I was full of longing for the actual operation of absorption and desorption, but at the same time there is some fear. Because never hand operation, but also afraid of because of the hands and feet caused some unnecessary accidents, until after I went to let my these concerns are all thrown away.
Our practical training place in the 12th floor of the complex laboratory. At that time, the teacher first gave us a group, a class of forty-eight people, divided into four groups. Then each group of students to complete their own tasks independently.
The first day of class, we do not understand anything, only quietly standing there listening to the teacher. Driven by curiosity, the students swarmed up and looked at the set of equipment in front of them, only to know is a distillation tower, and then recognize some valves, because before the pre-study when I saw the equipment process diagram, but in the end how to operate, it is really a rather tricky problem. Until the teacher will give us a rough introduction to the whole process, only to know what we should do next!
In this way, our practical training is officially on track. We kept on ning the valves, kept on recording the data, kept on processing the data, and the faults kept appearing in the operation, but they were all overcome by us one by one. Perhaps, some people really feel that this is a rather boring, tedious thing, but I would like to say that, when you are in the scene, hand manipulation of a set of new equipment you have never met, personally record the operation of their own data, according to the teacher's method of data processing, all of which, not only to satisfy their own curiosity so simple, you will be y attracted by the process, intoxicated in it, and enjoy their efforts!
Through a period of time together, the group's ability to strengthen the collaboration, and even a look at each other, are able to make each other understand what to do next, and occasionally talk to them about the theory of the book on the knowledge of the book has also done a review of the consolidation. My task in the group is to adjust the size of the valve according to the process.
Through this internship, I really learned a lot of things in the textbooks can not learn, because although it is a short fourteen days, but learned far more than imagined, I am very grateful to the individual members of our group, without their help, can not learn so much knowledge in the end of the practical training, each of them not only full of gratitude, but also to get along with them so many days of reluctance, and also very grateful to the teacher. The company is also very thankful to the teachers for their careful guidance.
Personal practical training summary of the universal version of 3
This semester is coming to an end, in this semester I did a lot of chemical training process, in these experiments in the practical training, I do not only experience their own hands-on to explore the results of the experiment of the hardship, but also a deep sense of each practical training to bring me unlimited joy.
To do chemical experiments is not easy at all, in the hands of the operation before, I did a very full prep work, in the prep experiments before, first of all the experiments of the theoretical knowledge of the familiar, as well as the general process of the process, because this is the premise of the experiments, or will be in the hands of the operation of the process of the problem, which will make my experiments more difficult to waste a lot of raw materials as well as valuable time. Doing experiments in the process must be hands-on, so that the impression left on me will be deep, otherwise soon after the experimental process will be forgotten, after the experiment also need to think again and again.
In these experiments to my deepest impression is the PVC glass simulation production process of this training, but also let me the most headache, the face of each process is always confused, I first in the drawings on the flow charts, and then conceptualize their own ideas, and then find my classmates to discuss together, and ask them to
To the point, we discussed the night, and finally figured out that in the next day, we will be able to find the right way to do this, but not to the right way. Finally understand, in the next day's practical training class I will be able to do the process of each section, and through the teacher's explanation, I know the detailed process of each section of PVC, from which I learned all the sections of PVC, the first synthesis section, I know the principle of its production, the second compression section, I know the process of its process, as well as the other sections of the process. I learned about the production principle of the first synthesis section.
After this semester's practical training, I learned a lot of things from teachers, classmates and the network, strengthened my own hands-on ability, but also cultivated my ability to think independently, especially in the final report of the practical training, because in the hands-on time, there are many problems, so in the report will be written in detail deficiencies so that they can be corrected in the future, and I also learned the skills of drawing. At the same time, I also learned the skills of cartography, thus improving my detailed understanding of the process. I think these in my future learning, working life to lay a firm foundation, because these not only make me learn the chemical knowledge and also let me realize a lot of reasoning, I think this semester of chemical training will become my high school life will always remember the most beautiful time.
Personal training summary of the universal version of 4
In the process of internship, I from the technology, teamwork, professionalism and other aspects have great gains:
From the technical side, this internship gives me an opportunity to apply the knowledge I have learned to solve real-world problems, in the process of internship, many of the original and unskilled knowledge gradually be clear. In the process of internship, many original and unskilled knowledge gradually be clearly understood, many original aspects that have not been emphasized have been consolidated, but also in the process of discovering and solving problems to learn a lot of new things, in addition to the technical requirements mentioned in the textbooks, I have a deeper understanding of the following aspects:
1, the need for field surveying survey before:
In the leveling and wire measurement before, as a team leader, I always have a good understanding of the importance of the field. Before, as a team leader, I have organized the closed level route and survey area survey, do the preparatory work in advance, the result is that the team members of the task to be completed with an intuitive understanding and full preparation, directly improve the accuracy and efficiency of the operation. Especially take leveling survey as an example, in the afternoon before the survey, the whole group members made field observation along the leveling route stipulated by the teacher, analyzed the road sections that might be difficult in the process of survey, selected the fixed points as the end of the survey section, and estimated the number of stations in each survey section, and then went back to design the survey route and the midway station setup map after we analyzed the environment of the survey area, which saved a lot of time in the carrying out of the survey. We saved a lot of time after the survey was carried out.
2, the surveyor should pay attention to the problem:
In the process of internship, I experienced a lot of books did not mention the surveyor's work in the need to pay attention to the problem: in general, due to the distance between the distance, if the surveyor does not notify the ruler, the ruler is very difficult to judge by themselves whether the readings are complete, so after the completion of the readings, the surveyor should be notified immediately to run the ruler, so that to a certain extent, can reduce the ruler's work, so as to minimize the risk of the surveyor's work. To a certain extent, reduce the labor intensity of the ruler runner, to avoid running the ruler unnecessarily in a state of tension; centering the process of leveling, should try to make the plane provided by the tripod level, so that you can reduce the foot screw excessive twisting, thus reducing the next station centering the time of leveling; in the station placed on the foot of the tripod, the two frames should be along the level of the route or the closed route of the direction of advancement, so that in the process of readings This greatly reduces the possibility of error due to the surveyor touching the tripod; according to the data read by our group, most of the values of the points with "large" errors are obtained when the readings are more hesitant, therefore, the surveyor should look at the data in the process of reading and read immediately after the data, as the teacher said, to be "steady, accurate, and ruthless".
3, running feet of personnel to pay attention to the problem:
In the running feet of the project, each running feet before and after the distance should be based on the cumulative difference in the last data to make timely adjustments, so that it can not be overrun; in the ground slope is higher, it should be appropriate to set up more turn stations, to avoid the time wasted because of multiple adjustments or reset the station can be to improve efficiency.
4, about the number of skills:
In the specific operation before, many times feel that the external work and internal work in the calculation of data are in accordance with the established steps, after the teacher's guidance, we gradually mastered some of the skills related to the number of: in the leveling, for the front and rear of the cumulative difference in sight distance this limit, the recorder in each station after the completion of the reading should be calculated immediately, so that in the next station readings are completed, and the recorders can be used in the next station. The recorders should calculate it immediately after reading each station, so that they can adjust it intentionally in the next station;
5. When measuring the elevation of the broken points of the guide line survey
We used the total station and leveling instrument to observe the elevation, and we found that the data collected by the leveling instrument had a higher accuracy, while the data collected by the total station had a larger error, so we should try to choose a more accurate and precise instrument when we measure the elevation of the control points. So we should try to choose the level meter with higher accuracy to measure the elevation of the control point.
In terms of teamwork, I also got a lot of valuable knowledge:
(1), the team should make reasonable arrangements for the personnel:
For example, in the process of leveling, the speed of reading on the level meter is much faster than the speed of recording and calculating in the group, we can let the ruler runner not to move the ruler pad, and the front and back of the next station's visual distance difference is measured in steps; in the setting up of the instrument, the recorder can be used to record the data. setting up the instrument, the recorder could assist the observer in setting up the instrument quickly. These practices have improved the operational efficiency of our team.
(2), team spirit:
In the actual measurement process, due to the emergence of difficulties, will inevitably affect the mood of the members, thus affecting the measurement work, here, we need to play a role in the team spirit, everyone *** with the problem, as a whole to overcome the difficulties; due to the completion of the leveling measurement of the required time is limited, the workload is very large, coupled with the hot weather, every day, we have to work together to solve the problem.
From the point of view of professional quality, I have benefited a lot, so that I am more aware of the scientific nature of surveying and mapping work, precision and hardship:
Even in our internship in such a less stringent requirements for precision in the measurement of the work, many of the units of the limit is to millimeters, seconds and other small units to measure, which is the work of surveying and mapping has a high degree of precision of the intuitive reflection; for the surveying and mapping work, science, precision and hardship, the work of the scientific nature of the work, precision and hardship. For the work of surveying and mapping of scientific, precision and hard intuitive understanding, I more appreciate as a qualified surveying and mapping workers should also have to make their own corresponding professional quality. Therefore, in the actual measurement we try to be careful, wrong rework, never sloppy. Recognized that in the project, the need is to be careful, rigorous, a decimal point of error may affect the overall situation, which also fosters our rigorous style of work, which is also the basis of professional quality.
Individual practical training summary universal version 5
The purpose of this practical training is to further develop their business level, skills to get along with others, teamwork spirit, the ability to deal with people, etc., through the combination of theory and practice, personal and social communication, especially the observation, analysis and problem solving of the actual work ability, in order to improve their practical ability and comprehensive quality, and hope to help them integrate into society more smoothly in the future, into their own work.
Generally speaking, there is a big gap between the living environment of the school and the working environment of the society. The school mainly focuses on cultivating the learning ability and professional skills of the students, while the society mainly focuses on the professional knowledge and business ability of the employees. To adapt to the survival requirements of society, in addition to strengthening the theoretical knowledge in the classroom, it is necessary to personally contact the community to participate in work practice, through the understanding of social work to guide classroom learning. Practical experience of the basic quality requirements of the general company staff, in order to develop their adaptability, organizational skills, coordination skills and the ability to analyze and solve practical problems of the work.
Practical training plays a very important role in helping fresh graduates move from campus to society, so it is important to pay high attention to it. Through the practical training, let yourself find out the gap between your own situation and the actual needs of society, and in the future study period to supplement the relevant knowledge, for the job search and formal work to do a good job of knowledge, ability to prepare, so as to shorten from the campus to the community of the psychological adaptation period.
Although it is already the third year, but for the actual social work is still at a loss, after all, the books are just a concept, the specific operation does not teach you. A rare opportunity for practical training, I want to do it well. During this time to learn some relatively trivial things, but really appreciate the pain of work, I feel that their professional knowledge learned in school is seriously insufficient to adapt to the fierce requirements of the work, such as those of the actual operation of the work of the strong, we just came out of the little work experience, and they did not learn the school's professional courses, it is simply unable to compete with the veterans, sometimes feel Sometimes I feel like I can't get started. Although this is only a sales of cosmetics company, but in this practical training period, I from the training to the organization of goods and to the product site marketing, etc., are fully committed to the work.
Practical training is a familiar and unfamiliar word to me, because I have experienced a lot of practical training in my more than ten years of student life, but this time is so different. It will be a comprehensive test of my ability in all aspects: learning, life, psychology, body, mind and so on. It's like a litmus test to see if I can put my theoretical knowledge into practice. It is related to whether I can be successfully based on this challenging society in the future, and it is also the key to build my confidence, so I am 100% committed to it! Tense two weeks of practical training life is over, in these two months I still have a lot of harvest. It is necessary to summarize the end of practical training.
This is the first time to formally connect with the community to step into the workplace, and start a completely different life with the past. Every day in the prescribed time to and from work, work during the time to seriously and punctually to complete their work tasks, can not be hasty perfunctory. Our shoulders began to carry a civil responsibility, everything has to be careful and cautious, or at any time may have to pay a huge price for a small mistake to bear serious consequences, no longer a sorry and a paper apology can be resolved.
Review these two months, their own work, ask yourself, frankly summarized. There are still deficiencies in many areas. Therefore, it is more important to strengthen their work in a timely manner to strengthen their minds, correct their consciousness, and improve the method of sales work skills and business level.
First of all, in terms of shortcomings, summarized from their own reasons. I think I still have a certain degree of lack of strong persuasion of the customer, to impress the purchase of psychological skills.
As a salesperson, our primary goal is to set up a bridge connecting our goods and customers. For the company to create business results. Under the guidance of this direction, how to use sales techniques and language to impress the customer's heart, stimulate the desire to buy, it is particularly important. Therefore, in the future sales work, I must strive to improve and strengthen the skills to persuade customers and impress their purchasing psychology. At the same time to do a combination of theory and practice, and constantly for the next stage of work to accumulate valuable experience.
Secondly, pay attention to the details of their sales work, bearing in mind the sales theory that the customer is God this one to the theory of the famous words. With their own sincere smile, clear language, meticulous promotion, considerate service to conquer and move the hearts of consumers. Let all the customers come to our store are happy and satisfied. Set up our store staff quality spirit, more set up our quality service brand.
Again, to deepen their work business. Familiar with each cosmetic item number, size, color, price. To be familiar with the heart. Learn to face different customers, using different promotion techniques. Strive to make every customer can buy their own satisfactory goods, more strive to increase the number of sales, improve sales performance.
Finally, correct their mindset. The adjustment of its mentality so that I better understand that no matter what you do, you must do your best. The presence or absence of this spirit can determine the success or failure of a person's future career, and our sales work is even more so. If a person realizes the secret of eliminating hard work by working with all one's strength, then he has mastered the principle of achieving success. If you can always take the initiative, the spirit of hard work, then no matter what the sales position is difficult to make a difference.
Practical training is the most important practical link after students have completed all the courses in the university. Through this practical training, I have a more detailed and deep understanding of their own specialties, but also the consolidation of knowledge learned in the university in the past few years and application. From this practical training, I realized that there is a certain distance between the actual work and the book knowledge, and need to further study. In this accounting practical training, I can be said to benefit a lot. Only two months of practical training, I will benefit for a lifetime. Through this practical training, not only cultivate my practical hands-on ability, increase the actual operation experience, shorten the distance between the abstract textbook knowledge and the actual work, the actual work of a new start. Practical training is every student must have a period of experience, it makes us in practice to understand the society, let us learn a lot of knowledge in the classroom simply can not learn, open up the vision, growth of insight, for us to further into the community to lay a solid foundation.
Individual internship summary universal version of 5 related articles :
★ Individual internship summary universal 5
★ Summary of the ten universal version of the training summary
★ Summary of the training work of the 600-word individual universal version
★ Summary of the internship of the university students report universal template
★ Graduates ★ Individual internship summary model (universal 5)
★ Training summary universal version (10)
★ University graduates personal internship report summary universal 5
★ Universal college student internship summary 5
★ College student internship summary universal version five
★ Internship work summary universal template 5