SolIDWorks example teaching: detailed modeling steps of remote control battery back cover!

SolidWorks abbreviation (SW) is a new generation of mechanical 3D design tool for electrical industry design introduced by Dassault. The Chinese version of SolidWorks adopts a brand-new parallel and serial product development environment and enjoys a 3DCAD model, which is widely used in designing parts, mechanical equipment, medical devices, automobiles, aviation and other industries. SolidWorks can meet the needs of users to directly add various auxiliary plug-ins to the software, connect with various NC programming software, and directly print the model. Regarding the power of solidworks, in fact, I believe that many small partners also have a certain understanding, but for the mastery and use of software, many small partners may still be scratching their heads! It doesn't matter. If you want to learn to use solidworks, you have come to the right place. The rich solidworks quality video course will take you from software foundation to advanced operation.

Wonderful recommendation of solidworks popular video tutorial:

Software Description: Introduction to Solidworks Mechanical Design

Interior design: Solidworks engineering drawing design course

Software introduction: the use of Solidworks measuring tools

SolidWorks example teaching: detailed modeling step diagram of battery back cover of remote controller

Bian Xiao read a lot about SolidWorks modeling of the remote controller on the Internet, and found one thing, that is, there is no case about the back cover of the battery slot of the remote controller, so Bian Xiao tried to make one himself today. Of course, this is only one of the specifications, and the whole example step is a bit long, so take your time ~

Step 1: Click the boss to stretch, select the forward-looking datum plane, and draw the sketch as shown in the figure.

Step 2: Stretch the thin wall with symmetrical sides and a depth of 32. Activate thin-walled feature, unidirectional1.7mm.

Step 3, click on the boss to stretch, and select the thin-walled front as the datum plane to draw a sketch. Sketch as shown in the figure:

Step 4: Stretch to a given depth1mm.

Step 5: Click "Shear Extrusion", select the front of the boss extrusion 1 as the datum plane, and draw a sketch by converting the solid reference, as shown in the figure:

Step 6: Carry out stretch resection, complete penetration, and remove excess parts.

Step 7: Click the mirror direction command, select the forward-looking datum plane, and stretch the feature selection boss 1.

Step 8: Click the 3D Sketch command, select Convert Entity Reference, reference all outermost edges, and then exit the 3D Sketch.

Step 9, create a new datum, the first reference selects an arc, and the second reference selects an arc vertex.

Step 10, draw a sketch on the datum plane 1, as shown in the figure.

Step 1 1, click scan cutting, scan the outline and select the rectangular sketch drawn in the previous step, scan the path and select the 3D sketch, and select the option tangent to the path.

Step 12, select cutting and stretching, select the top as datum plane, and draw the sketch as shown in the figure, with the given stretching depth of 0.1mm.

Step 13: Click on the boss to stretch, select the forward-looking datum plane, and draw the sketch as shown in the figure. The stretching is selected with symmetrical sides and a depth of 5.5 mm ..

Step 14, click the reinforcement command, select the forward-looking datum plane, draw the line segment as shown in the figure, select the symmetry on both sides, and the depth is 0.5 mm Here, we need to pay attention to the direction of reinforcement generation.

Step 15, click the linear array command, and select the lower edge as the direction 1, the array distance is 2.5, the number is 2, the upper edge is the direction 2, the array distance is also 2.5, and the number is 2.

Step 16, click the sketch, select the lower surface as the datum, and draw the line segment.

Step 17: Create a new datum plane 2. The first reference selects the line segment of the previous step, and the second reference selects the endpoint of the line segment.

Step 18: Draw a circle on datum plane 2 as shown in the figure, and then exit the sketch.

Step 19: Click Scan Cut, select the sketch circle in the previous step as the outline, and select the line segment as the scanning path.

Step 20: Click the mirror image direction, select the forward-looking reference plane, and select the cutting scan in the previous step as the feature.

Step 2 1: Click on the sketch, first draw a geometric structure line, then use the text function of the sketch tool to enter text, then adjust the text position and exit the sketch.

Step 22, click the package command, select the relief effect, select the text sketch of the previous step for the sketch, select the bottom surface, the depth is 0. 1, and pay attention to the upward direction.

Step 23: Select the chamfer and fillet commands respectively to chamfer and fillet the edge.

That's it. Perfect shape.

Then, today's SolidWorks example teaching: detailed modeling step diagram of remote control battery back cover is over! Everyone must watch more, practice more, think more and learn more. I hope everyone can learn solidworks as soon as possible! ! Here, we also provide you with more courses to learn, click the link: