1. Open the 3dmax software with CAD drawings. Press the "t" under the window in the top view.
2. Then in the menu bar in the upper left corner, find the import command "Import" and click Open. First locate the saved dwg type CAD drawing, and then click Open.
3. Then a menu will appear, where we can click ok without modification.
4. Below, we see that the drawing has been imported and displayed in green. In order to make its coordinates consistent, let's click on this map and set it to 0 in the coordinate values below.
5. In order to facilitate our modeling, we need to freeze the drawings. Click on the drawings, right-click on the display menu, and select "Freeze Selected" to freeze. The above "Unfreeze All" means unfreeze.
6. Open 2D snap and set it. This allows us to capture lines, which is more convenient and accurate.
7. Now let's start modeling. On the right, select Create Panel, find "Line", and click to draw a line according to the outline on the drawing.
8. When the endpoints of points intersect, a dialog box will appear to prompt whether to close the spline, and we can click OK.
9. Wait, let's see. Now the graph is finished.
10, but now they are all separated, three rectangles. In order to operate conveniently, we need to combine the three figures into one. Click a graphic, find it in the property bar on the right, and then click Attach to attach it together.
1 1. Click to select the line segment we have drawn, and then click to find the "Extrude" extrusion command in the Modify panel.
12. At this time, we saw that the line in the window had turned into an airplane. At this point, we adjust the extrusion value to 2700 mm
13, press "p" to the perspective view to see the effect. Such a simple model is established.