1. Use the soundproof cover of the water pump.
A soundproof cover can be installed on the water pump to isolate the sound from the water pump and prevent the sound from coming out.
2. Pump vibration reduction.
A damping device can be installed below the water pump to reduce the vibration of the water pump, and the pipeline and water inlet and outlet pipeline of the water pump should be elastically supported to reduce noise transmission.
3. Install the exhaust fan
An exhaust fan can be installed in the machine room, and the exhaust fan should be equipped with a muffler to reduce noise.
What is the reason for the loud noise of the water pump?
1, which is usually caused by mechanical noise. The machinery in the pump room will generate noise during operation, which will lead to noise in the pump. Moreover, the rigidity of the pump is not good, and the internal impeller is easy to fall off, so it will cause great noise in the pump during operation.
2. Besides mechanical noise, there is another reason, that is, the pump itself. Its base design is unreasonable, or concrete is filled under the base, which causes the problem of empty drum. Therefore, the water pump will vibrate and make noise when it is working.
3. It may also be aerodynamic noise. The fan in the water pump rotates with the air, so the blades of the fan will have some noise. Therefore, in this case, we should always do a good job of wind protection to avoid excessive wind in the air and drive the pump to make noise.
4. When the hydraulic power vibrates, it will also cause the noise of the water pump. Therefore, when using the water pump, we should try our best to control the internal hydraulic power to prevent the noise of the water pump from affecting the life of the users downstairs.