First of all, buy a blister machine. I think we will find a few more on the Internet, and then by phone to ask the specifics of the suction molding machine and then make a comparison, and ultimately bought the equipment is good and the most affordable one. In fact, there is a misunderstanding that will make you lose, because most of the manufacturers selling plastic absorbing machine will say that their machines are the best, and you listen to him so say, the feeling is very good, and when you buy, you will find that the original vacuum molding machine lack of this and less that, you also have to spend more money to buy accessories. So remind you a little, look at the accessories, look at the brand, but one thing is more special, that is, the air compressor to go with their own, other things like water coolers, vacuum pumps and what sellers will give you with good. Secondly, don't look at the miscellaneous brands, the second-hand best not to, in case your production to half of the sudden machine out of the problem, then you can trouble. Finally, do not buy for the low price, the so-called equipment machine is good, ultimately it is necessary to look at the configuration and brand, because only the configuration is good, the whole suction molding equipment will be good, so that your machine can produce a good thick sheet of suction molding products.
Price of the blister machine. Because the type of blister machine is different, and thus the price also has a relatively large difference. Fully automatic blister machine price should be between 100,000-120,000, if less than 100,000, then you can not to consider, because its configuration is relatively low, the quality of the products produced will not be so good, and easy to produce problems again. Semi-automatic plastic absorbing machine, it has single station and double station, usually buy double station. As for the difference between them you can ask the manufacturer, this problem, you buy when raised, they will give you a detailed road. If your money allows, you can buy a better suction molding machine, so that the production of thick suction molding products of high quality, more to win the trust of customers.
I hope this information can help you.