What is the layout of the injection mold

What is an injection mold? An injection mold is a tool that produces plastic products and gives them precise dimensions and structural integrity. So what is the layout of injection mold? Heng Sheng will share with you below. A, lateral parting and lateral core extraction: when the plastic parts there is inverted buckle that is inconsistent with the demolding direction of the layout will have to use the line position, the common way: slider, tilt top, core extraction, etc.; B, demolding layout: that is, the plastic parts from the mold out of the top of the equipment, commonly used: ejector pins, top plate, the Division of the cylinder, etc.; C, molding parts: that is, we usually say that the front and rear mold CORE, but also with the product contact with the closest parts; D, temperature adjustment system; D, the temperature adjustment system; C, molding components: that is, we usually said the front and back mold CORE, but also with the goods contact with the closest parts. D, temperature regulation system: in order to meet the needs of injection molding technology on the mold temperature, before and after the addition of the mold cooling waterway; E, guiding system: determine the relative position of the front and rear mold when the mold is closed, usually with a guide column, guide bushings, the necessary conditions, some of the ejector also need to guide columns, guide bushings, positioning; F, the layout of the exhaust: there are two common types of exhaust: exhaust groove, the molding parts gap. In order to remove the air in the cavity during the injection molding process and the gas generated in the molding process, often set up in the parting surface exhaust slot. Set the principle of exhaust groove is, without affecting the overflow and phi, should be as large as possible exhaust groove. While the needle, thimble, insert is the use of molding parts gap exhaust; G, pouring system: molten plastic from the nozzle lead to the cavity of the runner, can be divided into: dry runners, manifolds, sprues, cold wells and so on. Heng Sheng Plastic Mould Industry Co., Ltd. in household appliances medical equipment, digital products, automotive parts, machinery shells and other precision molds have accumulated many years of production and management experience, with a wealth of industry production process.