1. First, unscrew the hard disk with a Phillips screwdriver. After removing all the screws, you can easily remove the rear shell panel of the hard disk, as shown in the following figure:
2. After that, we need to carefully take out the original mechanical hard disk. It should be noted here that the data line interface of the hard disk is very small. Please carefully unplug the data cable plug on the hard disk, as shown in the following figure:
3. After taking out the original mechanical hard disk in the notebook computer, you can reinstall the newly bought solid-state hard disk in the notebook computer. Because the solid-state hard disk is basically the same as the original mechanical hard disk, the interface is the same, so the installation becomes quite simple, as shown in the following figure:
Solid-state hard disk (SSD) is a hard disk composed of an array of solid-state electronic storage chips, which is composed of a control unit and a storage unit (FLASH chip and DRAM chip).
Solid-state hard disk is exactly the same as ordinary hard disk in terms of interface, function and usage, and the product shape and size are also exactly the same as ordinary hard disk. Widely used in military, vehicle, industrial control, video monitoring, network monitoring, network terminals, electric power, medical care, aviation, navigation equipment and other fields.