Why does the light on the network port 2 of the Telecom fiber optic modem keep flashing?
Hello
You can try restarting the Telecom fiber optic modem. If If this is still the case, you can call 10000 and call manual service to ask the staff to check and handle it for you.
The signal light flashes one after another, indicating that data is being transferred in and out. This is normal. Why does the fluorescent lamp keep flashing?
The main problem is, as they said, "The switch is connected to the neutral wire, just change it to the live wire." Please check.
It is also possible that the switch is "dirty" or the switch has an indicator light and some leakage.
Secondly, the neutral line is poorly grounded, and it will light up when measured with an electric pen.
The smallest possibility is that the light wire is a hidden wire and there is leakage between it and other hidden wires.
After turning off the light, due to the reasons mentioned above, the filament will discharge the phosphor and the light will turn on.
Because the circuit is not connected, the electrons on the phosphor powder are not released in time, and the voltage difference between the filament and the phosphor powder does not reach a certain level, so the light goes dark.
After a while, the electrons on the phosphor are gradually released, and a certain voltage difference is reached between the filament and the phosphor, causing another discharge.
This is the reason for ‘keep flashing’.
This kind of "constantly flashing" light is actually very dark and cannot be seen clearly in the daytime. What's going on with Telecom's optical fiber?
The user's optical fiber broadband network is offline and the user cannot connect to the Internet normally. You only need to check whether the fiber optic modem device displays a red indicator light to confirm that the user's broadband network is disconnected. Users only need to restart the network connection of the fiber optic modem device to restore the normal network connection and access the Internet.
If the network connection problem cannot be solved, you can only call the telecommunications customer service to notify the broadband network maintenance personnel to come and solve the problem.
Here I will briefly explain to you the problem of optical fiber, because I am a network student and have a good understanding of this aspect. There may be many people who are artificially fast in optical fiber, so I want to ask here, two Two Gigabit interfaces are connected to each other. One uses optical fiber and the other uses 1000M dual-angle wire. Which one do you think has the fastest transmission speed? Obviously the problem is that they are equally fast. Fiber optics does not necessarily mean fast. It can only be said that different transmission media are useless. So don’t misunderstand. It’s just that twisted pair is not easy to network, but optical fiber is easy to network, and the transmission distance is relatively long. Far. The bandwidth is how much bandwidth you want. The operator will allocate it to you. The corresponding fee will certainly be expensive. I hope it can help some people who have misunderstandings. I hope you will adopt it! Why does the telecom fiber optic modem only show the power supply?
It shouldn’t be like this. In addition to the power light on, there will also be the pon light, lan light or tel light on. If only the power light is on, it may be something else. The connection cable is not connected. If the Tel phone is not connected, the indicator light will not light up. If the los light lights up, it means that there is a network failure in the broadband. Open the web page to see if you can connect to the network. If not, then confirm that it is a broadband problem. , at this time, customers need to call the China Telecom customer service hotline to report broadband problems.
After successfully reporting a broadband failure, China Telecom will issue a work order to the local telecom business office and will come to the customer within 48 hours to troubleshoot the problem. Please be patient and wait for the phone call from the installation and maintenance personnel. My home is a telecommunications fiber optic modem. Is it normal for the green light on port 1 to flash?
A preliminary judgment of the problem can be made based on the display of the signal light on the ADSL Modem panel, as follows:
"ADSL" light: used to display the synchronization status of the Modem. A steady green light indicates that the Modem and the central office can synchronize normally; a red light indicates that there is no synchronization; a flashing green light indicates that synchronization is being established.
The "10BaseT" light is used to show whether the connection between the Modem and the network card or Hub is normal. If this light is not on, there must be no communication between the Modem and the computer. When there is data transmission in the network cable, this light will Flashes slightly.
The "ATM25" light shows the status of the ATM25 port and is generally not used.
The "Maint" light is related to remote management and is usually always on.
"Power" light, power display. Why does the 3250 screen keep flickering?
If the phone is empty and the system is still flashing, you should consider going to customer service. It should be a motherboard failure. Why is the wireless coding light on the Telecom fiber optic modem turned on
The wireless coding light on the Telecom fiber optic modem is on, indicating that the wireless function has been turned on.
It is not recommended to use wireless code matching, just turn on the wireless. The light is on, indicating that the wireless function has been turned on. Because the wireless coding function is basically not used at ordinary times. Therefore, it is recommended to use the wireless function normally.
Telecom Broadband is the general term for the Internet access services provided by Chinese telecom operators to telecom users. It is presented to users under the unified business brand of "E-Surfing Broadband" and provides users with wireless access through the unified Tianyi Broadband client. It seamlessly covers broadband access services, and integrates simple and practical applications such as unified address book, SMS, Tianyi Live, network disk, security expert, Tianyi Video, 189 mailbox, etc., to meet the needs of users for high-speed Internet access, sending and receiving emails, online stock trading, online shopping, etc. Video on demand, online games, distance education, telemedicine, telecommuting, home office, e-commerce and other business needs. Why did China Telecom's optical fiber suddenly fail?
Hello, first of all, thank you for your attention and support to China Telecom. According to your description, you can check whether the optical fiber socket is loose and restart the broadband modem. If it still doesn't work, you can call China Telecom's toll-free customer service hotline 10000 to report for repair, and the staff will come to your door to help you repair it.
The reply is for reference only. For details, please contact 10000 or log in to Anhui Telecom Online Business Hall ah.189. Anhui Telecom's online business hall offers a 30% discount on 4G packages, including a 99 package package for 49 yuan, a 129 package package for 69 yuan, a 199 package package for 89 yuan, a 299 package package for 99 yuan, and 20M broadband for only 20 yuan! For details, visit Anhui Telecom’s online business hall.
I hope my answer is helpful to you and can be adopted by you!