Simple respirator belongs to the salvage goods, to ensure that the rate of intact 100% in an emergency state.
Simple respirator, also known as resuscitation balloon, air bag, balloon, etc.. Applicable to cardiopulmonary resuscitation and need artificial respiration first aid occasions. Especially suitable for choking, breathing difficulties or need to improve the oxygen supply. Usually consists of an inlet valve, a compression unit (e.g., air bag) and a patient valve. It is characterized by ease of use, light pain, fewer complications, portability, and immediate ventilation with or without an oxygen source.
Usually consists of an inlet valve, a compression unit (such as an airbag) and a patient valve, and is usually equipped with accessories such as an air storage bag and a breathing mask. It is a resuscitation device that allows ventilation to the patient's lungs by the operator pressing the compression unit (e.g., air bag) on the device.
Used to provide lung ventilation in situations where the power supply is not complete and in emergencies when artificial respiration is administered to patients with sudden respiratory distress or respiratory failure.
Routine maintenance: of all the simple respirators, only the silicone material can be repeatedly disinfected, the rest of the material can only be disinfectant wipe disinfection and only for one-time use, a single patient can be reused.
Disassemble the respirator and soak it in a 2% glutaraldehyde alkaline solution for 4 to 6 hours. After removal, rinse all accessories with sterilized distilled water to remove residual disinfectant. The gas storage bag should only be wiped and disinfected, soaking in disinfectant is prohibited as it is easy to be damaged. In case of special infected patients, ethylene oxide fumigation can be used to disinfect.
Sterilized parts should be completely dry and checked for damage, assemble the parts in order. Do a self-test and standby.