1. special equipment registration form
2, product quality certification materials.
3. Acceptance inspection report and "safety inspection" sign.
4, the operator's "special equipment operators qualification certificate"
5, imported boiler and pressure vessel safety performance supervision and inspection report.
6, boiler and pressure vessel installation quality certificate.
operational safety
1, pay attention to ventilation and monitoring before entering the equipment, open manholes on drums and containers and hand holes on headers, and fully ventilate; When entering the equipment maintenance, ventilation should be maintained, and someone must be supervised outside the equipment.
2. Pay attention to the maintenance of equipment with narrow electricity safety and wet conditions. Low-voltage explosion-proof lamps with voltage not greater than 12V or 24V should be used for lighting, and open flame lighting is strictly prohibited.
3. Do not disassemble and assemble the connector under pressure. If it is necessary to remove or tighten the fasteners of pressure-bearing parts, all the pressure must be released before inspection to prevent accidents.
4, should be in accordance with the requirements of the use of various protective equipment, standardized use. When in use, you must wear it carefully and fully during the whole contact time. Workers should make full use of personal protective equipment to protect themselves, so as to reduce the injuries caused by maintenance.
Refer to the above? Baidu encyclopedia-special equipment