How to install and wire the bathroom equipotential

The installation and wiring of bathroom equipotential need to follow the following steps:1. Determine the equipotential connection point: equipotential connection point is usually located in the bathroom wall, you can use the potentiometer or wire detector to determine the location.2. Installation of equipotential connection box: install the equipotential connection box in the wall near the connection point, and fix it with screws.3. Connection of wires: connect the grounding wires of all electrical devices in the bathroom to the equipotential connection box.4. Connection of main power supply: make sure that all electrical devices are connected to the same grounding wire. Connect wires: Connect the grounding wires of all electrical devices in the bathroom to the equipotential connection box, make sure that the grounding wires of all electrical devices are connected to the same equipotential connection box.4. Connect to the mains: Connect the equipotential connection box to the mains, make sure that the connection is correct and firm.5. Test: Use a potentiometer to test whether the grounding of the equipotential connection box is normal or not, make sure that the grounding wires of all electrical devices are connected to the same equipotential connection box. Test Note: 1. Before installation and wiring, be sure to disconnect the main power supply. 2. Installation and wiring need to be carried out by a professional electrician, do not operate privately. 3. The equipotential box should be installed in an easy to reach location, in order to facilitate maintenance and inspection. 4. The equipotential box should be checked regularly to ensure that the connection is normal. 5.