We first utilize the method of investigation, through the investigation of the equipment of the various processing modules to check them, in order to find the cause of the equipment itself. In addition, if the equipment check did not find the reason, then we must start from the raw water to check, check whether the raw water quality to produce drastic changes.
Water treatment equipment troubleshooting method:
1, pretreatment device
First of all, check whether the pretreatment device is a problem, by checking the pretreatment device filter media is filtered to saturation, because the quartz sand, activated carbon and other filter media after a period of time need to be cleaned in order to ensure that normal filtration effect.
Solution: replace the quartz sand, activated carbon and other filter media.
2, cartridge
Water treatment equipment cartridges have a service life, some of which are used for a period of time to be cleaned, some cartridges need to be replaced directly.
Solution: develop a regular equipment filter inspection and maintenance schedule, regular replacement or cleaning operation of the equipment filter.
3, in addition to the ash system
Water treatment equipment, there is a system in addition to the ash system system, the system is used in some key parts of the equipment to remove the ash operation, if it has a problem, then it will also directly affect the water quality.
Solution: troubleshooting, inspection, maintenance.
4, pure water tank
Water treatment equipment produced by the water is finally the first to be stored in a pure water tank, if the pure water tank is dirty, then the output of the water quality will be affected, this place should also be checked.
Solution: clean up the dirty