How to choose the power of the laser cutting machine? What is the difference? In the choice of equipment, mainly according to the material you cut, and then cut the laser power, from the theory above, the laser power and cut the thickness of the material, and the density is directly proportional to a factor, so in terms of power selection, it is to choose according to the material.
Generally, if the thinner, easier to cut the material, the use of non-metallic materials can be, if it is thick material, or density is relatively high case not, we must use high power to cut, if the power is relatively low case, may not cut through.
If you want to cut a thick material, it is based on a variety of aspects to choose, to think of the material cut well, to do the power and the thickness of the material is proportional to a factor. There are certain aspects, if the material is thicker, you only have a high power is not enough, but also has a suitable focal length to be able to, if the focal length is not the right case, the edge of the cut out is not a vertical edge, will produce a beveled edge.
And there is a, even if the material is relatively thin, if the use of a long focal length cutting out the effect is not good, so to make a product cutting effect is good, to choose a reasonable power and focal length can be.
Laser cutting machine