Supply Laiwu clean room installation of ultra-clean bench, ultra-clean bench is a local purification equipment, that is, the use of air-cleaning technology to make a certain operating area within the space to achieve a relatively dust-free, sterile state. When used, it must be placed in a clean space. The number of inoculation is not subject to the limitations of the sterile air, the operation is relatively simple, can improve the efficiency of work more substantially, suitable for large-scale production. In order to ensure the success rate of inoculation, inoculation using alcohol lamps, the effect is better. Ultra-clean bench models and specifications are diverse, widely used in health care, pharmaceutical, chemical experiments, electronics, national defense, precision instruments, instruments and other industries for the operation of the role of air purification equipment.
Ultra-clean bench working principle and use, ultra-clean bench has the advantage of easy to operate, more comfortable, high efficiency, short preparation time, more than 10 minutes to operate, basically can be used at any time. In factory production, inoculation workload is very large, need to often work for a long time, the ultra-clean table is very ideal equipment. Ultra-clean table by the three-phase motor for the wind power, power 145 ~ 260W or so, will be the air through the special microporous foam layer laminated by the composition of the "super-filter" after blowing out, the formation of a continuous dust-free and sterile ultra-clean air laminar flow, that is, the so-called "high-efficiency special air", it removes the dust and bacteria. The so-called "high efficiency special air" removes dust, fungi and bacterial spores larger than 0.3μm. The flow rate of the ultra-clean air is 24 to 30 m/min, which is sufficient to prevent contamination caused by the possible intrusion of nearby air, and such a flow rate does not prevent the use of alcohol lamps or Bunsen burners to sterilize instruments and the like. The staff operates under such aseptic conditions to keep the sterile material free from contamination during the transfer and inoculation process. However, in the event of a power failure in the middle of an operation, it is difficult to avoid contamination of materials exposed to unfiltered air. In this case, the work should be finished quickly and the bottle should be marked. If the material in the bottle is in the proliferation stage, it will not be used for proliferation in the future and will be transferred to the rooting culture. If it is a general production material, it can be discarded because it is extremely abundant. If it is in the rooting process, it can be kept for future planting.